• 제목/요약/키워드: External connection method

검색결과 103건 처리시간 0.022초

요측전완과 이개전부 유리피판을 이용한 아전상악절제술과 비주결손의 동시 재건 (Simultaneous Reconstruction of a Subtotal Maxillectomy and Columella Deficit using Radial Forearm and Preauricular Free Flaps)

  • 윤태근;은석찬;조성우;이재서
    • 대한두경부종양학회지
    • /
    • 제38권1호
    • /
    • pp.53-57
    • /
    • 2022
  • Reconstruction of subtotal maxillectomy defects with columella deficit is challenging. We report a unique case of facial reconstruction using a free radial forearm flap and a free preauricular flap for the maxillectomy and columella deficit. A 73-year-old woman was diagnosed with recurrent sebaceous carcinoma of the nose. We performed wide excision, including areas of the right cheek, nose, upper lip, maxilla, and columella. The resultant subtotal maxillectomy defect was reconstructed using a three-dimensional flap. First, a free radial forearm flap was transfered to resurface the nasal, oral, and external facial side. Second, a preauricular flap was positioned into the columella defect and anastomosed with the distal portion of the radial forearm flap pedicle. The two flaps survived, and the patient recovered uneventfully. We believe the radial forearm and preauricular double free flaps with the pedicle connection method were effective in reconstructing the present case of subtotal maxillectomy defect.

Feasibility of UHPC shields in spent fuel vertical concrete cask to resist accidental drop impact

  • P.C. Jia;H. Wu;L.L. Ma;Q. Peng
    • Nuclear Engineering and Technology
    • /
    • 제54권11호
    • /
    • pp.4146-4158
    • /
    • 2022
  • Ultra-high performance concrete (UHPC) has been widely utilized in military and civil protective structures to resist intensive loadings attributed to its excellent properties, e.g., high tensile/compressive strength, high dynamic toughness and impact resistance. At present, aiming to improve the defects of the traditional vertical concrete cask (VCC), i.e., the external storage facility of spent fuel, with normal strength concrete (NSC) shield, e.g., heavy weight and difficult to fabricate/transform, the feasibility of UHPC applied in the shield of VCC is numerically examined considering its high radiation and corrosion resistance. Firstly, the finite element (FE) analyses approach and material model parameters of NSC and UHPC are verified based on the 1/3 scaled VCC tip-over test and drop hammer test on UHPC members, respectively. Then, the refined FE model of prototypical VCC is established and utilized to examine its dynamic behaviors and damage distribution in accidental tip-over and end-drop events, in which the various influential factors, e.g., UHPC shield thickness, concrete ground thickness, and sealing methods of steel container are considered. In conclusion, by quantitatively evaluating the safety of VCC in terms of the shield damage and vibrations, it is found that adopting the 300 mm-thick UHPC shield instead of the conventional 650 mm-thick NSC shield can reduce about 1/3 of the total weight of VCC, i.e., about 50 t, and 37% floor space, as well as guarantee the structural integrity of VCC during the accidental drop simultaneously. Besides, based on the parametric analyses, the thickness of concrete ground in the VCC storage site is recommended as less than 500 mm, and the welded connection is recommended for the sealing method of steel containers.

전기화학적 기법에 의한 미생물연료전지 내부저항 특성 파악 및 전력관리시스템 연계 전압 변화와 유기물 저감에 미치는 영향 (Identification of Internal Resistance of Microbial Fuel Cell by Electrochemical Technique and Its Effect on Voltage Change and Organic Matter Reduction Associated with Power Management System)

  • 장재경;박혜민;김태영;양윤석;여정진;강석원;백이;권진경
    • 대한의용생체공학회:의공학회지
    • /
    • 제39권5호
    • /
    • pp.220-228
    • /
    • 2018
  • The internal resistance of microbial fuel cell (MFC) using stainless steel skein for oxidizing electrode was investigated and the factors affecting the voltage generation were identified. We also investigated the effect of power management system (PMS) on the usability for MFC and the removal efficiency of organic pollutants. The performance of a stack microbial fuel cell connected with (PMS) or PMS+LED was analyzed by the voltage generation and organic matter reduction. The maximum power density of the unit cells was found to be $5.82W/m^3$ at $200{\Omega}$. The maximum current density was $47.53A/m^3$ without power overshoot even under $1{\Omega}$. The ohmic resistance ($R_s$) and the charge transfer resistance ($R_{ct}$) of the oxidation electrode using stainless steel skein electrode, were $0.56{\Omega}$ and $0.02{\Omega}$, respectively. However, the sum of internal resistance for reduction electrode using graphite felts loaded Pt/C catalyst was $6.64{\Omega}$. Also, in order to understand the internal resistance, the current interruption method was used by changing the external resistance as $50{\Omega}$, $300{\Omega}$, $5k{\Omega}$. It has been shown that the ohm resistance ($R_s$) decreased with the external resistance. In the case of a series-connected microbial fuel cell, the reversal phenomenon occurred even though two cells having the similar performance. However, the output of the PMS constantly remained for 20 hours even when voltage reversal occurred. Also the removal ability of organic pollutants (SCOD) was not reduced. As a result of this study, it was found that buffering effect for a certain period of time when the voltage reversal occurred during the operation of the microbial fuel cell did not have a serious effect on the energy loss or the operation of the microbial fuel cell.

국내외 산업장 근로자의 AIDS(Acquired Immune Deficiency Syndrome)예방교육을 위한 소고 (Studies on AIDS(Acquired Immune Defficiency Syndrome) Preventive Educational Programs Intended for Domestic and Foreign Industrial Workers)

  • 정문희;조정민
    • 한국보건간호학회지
    • /
    • 제10권1호
    • /
    • pp.12-22
    • /
    • 1996
  • Currently. exchanges of industrial workers between countries are more active than ever. and the problem of AIDS in connection with the operation of preventive educational programs has reached a point where the issue cannot be limited to native people alone any more. Based on such judgement. this research has been carried out to provide basic study materials by grasping the latent factors representing the difference between countries in the levels of right knowledge. attitude and behavior with respect to AIDS maintained by workers who have grown in different social and cultural living background. During the period from Apr. 1. 1995 to Jun. 30. questionnaires. written both in Korean and English, were distributed to Korean and Malaysian employees working at certain Korean video manufacturers. and the results of replies. given by 80 workers who were analyzed through matched sampling· method where ages and sex matched by country. were used as the research materials. The gathered materials were analyzed through the SPSS package t-test. ANOVA. factor analysis and multiple stepwise regression methods. and the following results were obtained. 1. The 2 extracted latent factors could be named 'common. social' knowledge factor and 'in-depth. psychological' knowledge factor respectively. 2. The percentile points of 'external. social' knowledge factor. in the case of Korean workers. howed 90.0 at average. a figure 13.75 points higher than those of Malaysian workers. 76.25. On the other hand. the percentile points of the 'in-depth. psychological'knowledge factor showed 70.80 at average in the case of Korean workers. a figure 7.47 points lower than those of Malaysian workers. 78.33. Meanwhile. the difference in percentile points between the 2 latent factors was 8.54 at average. indicating that the points of 'in-depth. psychological' knowledge factor was lower than those of the 'external. social' knowledge factor. 3. As for Korean workers. the percentile points of the 'in-depth. psychological' knowledge factor showed higher points in office workers than in non-office workers. and such variables exhibited in the position of workers can explain the $7\%$ of the latent factor. The percentile points of the 'in-depth. psychological' knowledge factors. in the case of Malaysian workers. showed higher points in groups who had religion than in groups who did not. and higher points in groups who obtained information from newspapers than in groups who obtained from televisions or other sources; and with these 2 variables. $26\%$ of this latent factor can be explained. The results. of analysis described so far suggest that while Korean workers possessed general level of knowledge on AIDS. they had low level of practical knowledge as far as its depth is concerned. and that they had social prejudice on patients as well as on the AIDS infection route. In addition. because the overall knowledge level of Malaysian workers. is lower than that of Korean workers. it suggests that separate programs intended for Malaysian workers are required prior to executing integrated programs.

  • PDF

γ-type Stirling Engine의 Yoke crank 설계 단순화에 관한 연구 (A Study on Desing Simplification of Yoke Crank in a γ-type Stirling Engine)

  • 김신효;김의창;박진재;배한나;조대권
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권4호
    • /
    • pp.405-411
    • /
    • 2015
  • 최근 저탄소 녹색성장 및 그린에너지 개발 정책에 힘입어 외연기관의 일종으로 스털링엔진에 대한 관심이 고조되고 있다. 스털링엔진은 크게 ${\alpha}$, ${\beta}$, ${\gamma}$-type의 3가지 방식으로 구분되어지며 그 중 ${\gamma}$-type 엔진의 설계가 용이하고 다양한 적용이 가능하다는 특징이 있음에도 실린더와 크랭크간의 접속거리 문제로 인하여 ${\alpha}$, ${\beta}$-type에 비하여 용적을 크게 차지하는 문제가 있었다. 이를 해결하기 위한 한 방안으로 주로 ${\alpha}$-type에 적용하는 Yoke crank를 응용하면 용적을 줄임과 동시에 실린더의 병렬화에도 유리하다. 금번 연구에서는 기존의 Ross Yoke crank 설계기법에서 개선하여 ${\gamma}$-type 스털링엔진의 Yoke crank 설계를 더욱 단순하고 효율적으로 적용할 수 있는 방법을 제시하였다.

진료의 질관리에 대한 시론 -장애와 접근- (Quality Improvement in Patient Care Services : Obstacles and Approaches)

  • 한달선
    • 보건행정학회지
    • /
    • 제2권2호
    • /
    • pp.112-130
    • /
    • 1992
  • Patient care services are provided to individual patients in response to their health needs produced by illnesses or injuries. The services are often addressed to very serious conditions, and also they constitute the most expensive component of health care services. Therefore, the importance of quality is emphasized, but there are many indications that patient care quality is far from a satisfactory state in most of the countries. Based upon this observation, it is attempted to examine obstacles and approaches to quality improvement in patient care services. In doing so, following Taguchi's(1986) definition of product quality, quality of patient care services is conceived of as better when the less is the sociental loss attributalbe to variability of intended function and harmful side effects they emhibit after being delivered. Some distinguishing features of medical care sector pose difficulties in implementing effective quality improvement programs in patient care services. Nevertheless, newly proposed method of quality management, based on industrial quality management approach, seems to have a great deal of potential to effectively cope with such difficulties. This method, unlike the traditional approach to quality assurance, focuses on total organisational processes, not individuals, as the obproach to quality assurance, focuses on total organizational processes, not individuals, as the objects of quality improvement; variation, not comparison with standards, in quality measurement; and continuous improvement, not removing only bad quality care, as an ideal. Prerequisite to a successful use of any quality mangement method is motivating providers to improve quality. Conceivable approaches for such motivation are self-regulation, external controls and promotion of competition. Since these approaches are not mutually exclusive, they may be employed in an appropriate combination. In Korea, medical care providers are now functioning under the circumstances where they have little reason for making efforts to improve quality of their services. Once these circumstantial conditions are changed to exert pressures on providers to improve quality, the use of adequate quality management method becomes an issue. In this connection, much attention shoould be directed to the newly proposed method described above. In all these efforts for improving quality of patient care services, health insurance would be able to play a pivotal role. Poviders of medical care, buth indiciduals and organizations, are usually very responsive to the measures that affect their financing, and thus health insurance can be a strong instrument for motivationg providers to improve quality. Also, the insurance continuously acquires data on patient care, which could be processed to produce information required to effective quality control.

  • PDF

중공트랙형 단면의 프리캐스트 에코필라 사방댐 공법개발 (Development of Precast Concrete Method for Eco-Pillar Debris Barrier with Hollow Cross-Section)

  • 김현기
    • 한국산학기술학회논문지
    • /
    • 제19권3호
    • /
    • pp.542-552
    • /
    • 2018
  • 본 연구에서는 현장타설 콘크리트를 사용하는 친환경 에코필라 사방댐의 시공성과 경제성을 향상시키기 위해 프리캐스트공법을 제안하고 성능검증을 수행하였다. 강재를 이용한 사방댐 형식은 공사비가 높고 부식으로 인한 환경문제도 발생하고 있어, 최근에는 콘크리트를 이용한 친환경 사방댐의 설치가 늘고 있다. 그러나 국내에서 사방댐 설계기준으로 명확하게 제시된 자료가 없어 경험적으로 설계되고 있을 뿐 아니라 에코필라 사방댐에 대한 기준은 전무한 실정이다. 따라서 본 연구에서 에코필라 사방댐의 설계외력 산정방법에 대해 제안하고 중공트랙형 단면을 적용하여 설계를 수행하였다. 또한, 구조적으로 비교적 간단한 캔틸레버 기둥으로 최대 휨모멘트가 작용하며 프리캐스트 공법의 핵심기술이라 할 수 있는 연결부 공법을 3가지로 제안하고 실물모형 실험을 통해 성능검증을 수행하였다. 실험결과, 루프철근 이음을 적용한 실험체가 가장 큰 강성을 보였고 앵커철근으로 연결된 실험체가 작은 값을 보였으나, 제시된 3가지 형태의 연결공법은 모두 극한하중에 따른 최대 휨모멘트를 충분히 넘어서는 성능을 나타내었다. 실물 실험체의 제작과정에서 각 공법에 대한 시공성에 대해 검토한 결과 앵커식 연결방법이 가장 우수한 것으로 평가되었다.

Osstem USII plus 임플란트의 단기간 성공률 및 변연골 흡수량 평가 (Success rate and marginal bone loss of Osstem USII plus implants; Short term clinical study)

  • 김선근;김지환;이근우;조규성;한동후
    • 대한치과보철학회지
    • /
    • 제49권3호
    • /
    • pp.206-213
    • /
    • 2011
  • 연구 목적: 임플란트 경부까지RBM 표면 처리를 한 Osstem$^{(R)}$ USII plus system (Osstem Co., Seoul, Korea)의 임상적 유용성을 평가하기 위하여 연세대학교 치과대학 병원에 내원한 환자 중 이 system을 이용하여 치료 받은 32명의 환자에게 식립된 88개의 임플란트를 대상으로 기능 부하 후 1년까지의 임상적, 방사선학적 결과를 후향적으로 분석하였다. 연구 재료 및 방법: 진료 기록부를 통해 전신 조건, 성별, 연령, 식립 위치, 식립 된 임플란트의 직경 및 길이 등을 조사하여 그에 따른 분포 및 생존율의 차이와 함께 이들 항목이 변연골 흡수량에 영향을 미치는지 조사하였다. 방사선사진 분석으로 임플란트 식립 시, 보철물 장착 후 6개월 내지 1년간의 변연골 흡수량을 측정하여 분석하였다. 각 항목과의 연관성 분석을 위하여 독립 t-검정(independent sample t-test)을 이용하였으며(${\alpha}$=.05), 보철물 장착 전과 보철물 장착 후 12개월 동안의 변연골 흡수량 비교를 위하여 일원 반복측정 분산 분석(one-way repeated-measures ANOVA)을 이용하였다(${\alpha}$=.05). 결과:총 32명에게 식립된 88개의 임플란트 중에서 실패한 것은 없었으며 누적 생존율은 100%로 나타났다. 임플란트 식립 시부터 보철물 장착까지의 변연골 흡수량은 0.24 mm이었으며, 보철물 장착 후 12개월까지의 변연골 흡수량은 평균 0.19 mm로 임플란트 식립 시부터 보철물 장착 12개월까지의 총 변연골 흡수량은 0.43 mm였다. 상악에 식립된 경우와 하악에 식립된 경우의 변연골 흡수량을 비교했을 때는 통계적으로 유의한 차이를 보이지 않았으나 구치부에 식립된 경우가 전치부에 식립된 경우에 비해 변연골 흡수량이 크게 나타났으며 이는 통계적으로 유의한 차이가 있었다. 결론: 이상의 결과를 토대로 보철물 장착 12개월까지의 기간 동안 임플란트 고정체의 경부까지 RBM 표면 처리를 한 외측 연결형의 국산 임플란트의 단기간 임상적인 성공률은 만족스러운 결과를 보였으며 변연골 흡수량도 임플란트 성공 기준에 부합하였다.

고장력 볼트 이음부의 내부 압축응력 분포 (Compressive Stress Distribution of High Tension Bolted Joints)

  • 김성훈;이승용;최준혁;장동일
    • 한국강구조학회 논문집
    • /
    • 제9권2호통권31호
    • /
    • pp.171-179
    • /
    • 1997
  • 고장력 볼트 이음부에서의 힘의 전달은 부재간의 압축력 및 볼트축력에 의하여 외력과 균형을 이룸으로서 형성되어지며, 부재간의 압축력, 도입된 축력의 변화 및 미끄러짐하중 등은 볼트 체결부 및 볼트의 유효강성에 지배된다. 이때 유효강성은 일반적으로 접합부의 유효단면적과 탄성계수의 곱으로 나타내어지지만 접합부재의 유효단면적이 어느 정도가 되는지는 판단하기가 쉽지가 않다. 이를 위해서 종래에는 이음부의 탄성변형에 관계하는 유효단면적을 등가중공원통형으로 가정하여 이에 대한 여러 가지 검토가 이루어졌다. 그러나 이러한 제안식들은 설계상의 목적과 복잡한 계산을 피하기 위하여 매우 단순화시킨 것으로 어느 식이 타당한 지는 단정하기가 어려우며 이에 대한 상세한 해석적인 검토 및 실험적인 검증이 요구된다. 따라서, 본 연구에서는 볼트 축력에 의한 접합부재의 유효단면적 산정과 이에 대한 검증을 위하여 고장력 볼트 이음 시험편에 대해 피로시험을 실시하고 반복하중 재하 후의 마찰면의 형상을 관찰하여 유효마찰 영역을 측정하였으며, 유한 요소법에 의해 수치 해석을 실시하여 내부 압축응력의 분포형상을 밝히고 접촉면상에 발생하는 응력 분포영역을 근사화하므로서 마찰면의 형상과 내부 압축응력의 분포영역과의 관계 그리고 유효단면적의 산정 방법을 고찰하였다.

  • PDF

강합성 부재의 합성거동을 위한 전단 연결재의 거동 특성 (Behavior Characteristics of Shear Connector for Composite Behavior of Steel Composite Columns)

  • 원덕희;한택희;김승준;이정화;강영종
    • 한국산학기술학회논문지
    • /
    • 제14권4호
    • /
    • pp.1993-1999
    • /
    • 2013
  • 강합성 구조는 교량의 상하부 구조, 풍력 타워, 건축물의 기둥 등의 많은 분야에서 연구되어지고 있다. 강합성 구조의 가장 큰 특징은 강재와 콘크리트를 합성시킴으로서 두 요소의 단점을 극복하여 더욱 우수한 성능을 발휘하게 한다. 강합성 구조에서 강재와 콘크리트가 합성거동을 하지 않을 경우에 성능의 향상을 기대하기 어렵기 때문에 반드시 합성구조화 시켜야 한다. 교량의 상부구조에서는 강합성 보를 합성 거동시키기 위하여 다양한 방법의 합성방법을 제시하였으나 내부 구속 중공 RC 기둥이나 내부 구속 중공 CFT 기둥과 같은 새롭게 제안된 강합성 부재의 경우에는 거의 연구가 되지 않은 실정이다. 이러한 강합성 부재는 내 외부와 콘크리트가 합성되지 않을 경우, 두 재료간 슬립이 발생하여 설계 성능보다 성능이 감소할 가능성이 매우 크기 때문에 반드시 콘크리트와 강재가 일체 거동을 할 수 있도록 합성 방법을 제시하여 주어야 한다. 본 연구에서는 전단 연결재를 위의 기둥들에 적용하는 방안을 마련하기 위하여 전단 연결재의 실험적 거동 특성을 분석을 통해 추후에 전단 연결재 설계법 제시를 위한 기초 자료를 구축하였다.