• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.99-107
• /
• 2004

Likelihood of failure (LOF) for the external corrosion of stainless steel, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the inspection effectiveness and the used year increased, and that the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, In this condition, the LOF for the external corrosion of stainless steel had lower than that for the carbon and low alloy steels

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.3-8
• /
• 2008

Effect of external heating rate on the conversion efficiency for the steam reforming of methanol is investigated numerically considering both heat and mass transfer of the species in a packed bed microreactor. In a results from the numerical simulation, the conversion efficiency of methanol has been obtained for the external heating rate. The axial variation of mole fraction of methanol has been additionally presented for several cases of external heating rates. The results show that for the constant inlet temperature condition the conversion efficiency of methanol increases with external heating rate over the range of operating conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.454-456
• /
• 2003

This paper describes a type test results of 154 kV transmission line arrester with external gap. The test was carried on surge arrester unit and line arrester with external gap, respectively. Withstand voltage test demonstrate the voltage withstand capability of the line arrester with external series gap under the dry and wet conditions. In insulation coordination test external series gap shall be discharged every time when lightning impulse voltage with the steepness of more than 1500 $kV/{\mu}s$ are applied under the wet condition.

• 한국통신학회논문지
• /
• 제18권6호
• /
• pp.793-801
• /
• 1993

본 논문에서 우리는 외부공진기 내에 고 피네스 훼브리 페롯(F-P) 에탈론을 삽입시킴으로서 외부공진기 레이저의 주파수 잠김 및 주파수 잡음축소 등의 성능특성을 크게 개선시킬 수 있음을 이론적으로 보였다. 예를들면, 피네스가 30이고 광학적 두께가 1.5cm 인 F-P 에탈론은 3cm 길이의 외부공진기 내에 삽입한 경우, 동일한 조건에서 동작하는 종래의 외부공진기 레이저보다 7.6배의 주파수 잠김 정확도와 86배에 이르는 레이저 선폭 축소 특성의 개선 효과를 얻을 수 있었다.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.728-732
• /
• 2010

GIS(Gas insulated switching gear) is power equipment with excellent dielectric strength and is economy merit in high confidence and stability. Recently, because equipment of GIS was occurring problem of confidence used for a long time, partial discharge on-line diagnosis systems have been importantly recognized. Partial discharge (PD) detection is an effective means for monitoring and evaluation of dielectric condition of gas insulated system (GIS). The ultra-high-frequency (UHF) PD detection technique can detect and locate the PD sources inside GIS by detecting electromagnetic wave emitted from PD source. Therefore, real-time diagnostic system using UHF detection method has been developed for this application is being expanded gradually. However, the signal of partial discharge occurring in SF6 gas is very weak and susceptible to external noises which mainly consist of PD in air. Thus, it is important to distinguish the PD in SF6 gas more sensitively from the external noises. Unfortunately, these external noise signals and the partial discharge signals have very similar characteristics. Therefore, to solve this problem, we need the signal processing method for distinguish partial discharge signals with external noise signals for improvement of SNR(signal to noise ratio) and sensitivity. In this paper, we proposed internal signal processing method for removing external noise signals with built-in pre.amplifier and frequency conversion circuit.

• 대한물리의학회지
• /
• 제13권1호
• /
• pp.99-105
• /
• 2018

PURPOSE: The aim of this study was to evaluate the concurrent validity and clinical usefulness of the universal plastic goniometer to measure the range of motion of the internal and external rotation of the hip joint using the three dimensional motion analysis which can analyze the joints and segment movements in the most objective and quantitative method. METHODS: Clinical and kinematic data were collected from thirty individuals using a universal plastic goniometer and a ten camera motion analysis system. Passive hip rotation range was obtained three trials for left and right hip joints using two measure methods simultaneously. RESULTS: There were significant differences between all matching measures of the two measures of internal and external rotation of the hip joint (p<.05). The relationship between the two tests for all measurements of the internal and external rotation of the hip was statistically significant with correlation coefficient form r=.87 to .96. (p<.01). CONCLUSION: Clinical measurement of the internal and external rotation of the hip using a universal plastic goniometer is effective to assess the hip condition. However, application of universal plastic goniometer requires careful attention in more accurate evaluation and research verification of the internal and external rotation of hip joint.

• 가정과삶의질연구
• /
• 제22권6호
• /
• pp.99-109
• /
• 2004

This study investigated the motivation of the institutional elderly to participate in the leisure programs the participation motivation and their leisure life satisfaction. A survey questionnaire was administered to 265 elderly in an institution for the elderly. The data was analyzed using frequency analysis, factor analysis, and regression analysis. Major findings are as follows: First, the motivation to participate in leisure programs on the part of the institutionalized elderly tended to be more external than internal. Second, regression analysis indicated that the main internal factors that affected participation were health condition, interaction with roommate, gender. education level, and interaction with institution's staff. The major external factors that affected the participation were health condition, interaction with colleagues, gender, and education level. Finally, the results of the regression analysis indicated that the main internal factors that affected the leisure life satisfaction were, intrinsic motivation to participate in leisure programs, interaction with their roommate, gender, and education level.

• 산업공학
• /
• 제22권4호
• /
• pp.336-346
• /
• 2009

One of primary assumptions on DEA is that all DMUs for evaluation should be homogeneous. In comparative analysis among DMUs with relative efficiency measurement, it should be evaluated under identical conditions by ruling out external environmental influences. In this study, a measurement of innovation efficiency using the three-stage approach is performed. The approach employs DEA to measure relative efficiency and Tobit regressions to control external variables affecting innovation activity. The approach applied to firms in Korean Innovation Survey: Service Sector 2003 and 2006. Final efficiency scores of the approach represent net efficiency of the innovation. This study found that there is a increasing on technical efficiency of third stage, and it has difference with first stage significantly. Besides, a decrease on standard deviation of third stage is found. It means DMUs biased lower due to unfavorable condition and ones biased higher due to favorable condition are fallen into an identical operating environment through the approach. A measurement of net efficiency, excluding external effects, ensures the homogeneity of DMUs so that improves the reliability in terms of its analysis results. This study is expected to provide a direction and to be a valuable reference to further evaluation of innovation performance in Korean service sector.

• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.543-549
• /
• 2005

This paper deals with modeling and analysis fer the landing motion of a human-body model. First, the dynamic model of a floating human body is derived. The external impulse exerted on the ground as well as the internal impulse experienced at the joints of the human body model is analyzed. Second, a motion planning algorithm exploiting the kinematic redundancy is suggested to ensure stability in terms of ZMP stability condition during a series of landing phases. Four phases of landing motion are investigated. In simulation, the external and internal impulses experienced at the human joints and the ZMP history resulting from the motion planning are analyzed for two different configurations. h desired landing posture is suggested by comparison of the simulation results.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1231-1235
• /
• 2007

This paper presents the dynamic characteristics of a linear brushless dc (BLDC) motor with permanent magnet excitation for the precision conveyor according to the load condition. Dynamic performance of the linear BLDC motor driven with 6 step inverter such as thrust force and speed is simulated by finite element method coupling with external circuit and measured for the prototype motor. The results of finite element analysis are compared to the experimental results and verify reliability.