• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1829-1836
• /
• 2010

The district heating system distributes the heat generated from a cogeneration plant to wider locations. In this process, the district heating pipe (DHP) is subjected to internal and external loadings. The internal loadings are generally caused by the operating conditions such as water temperature and internal pressure. Frictional interactions between the pipes and the soil contribute to the external loadings. Thus, investigation of the mechanisms of failure of DHPs will help to guarantee both mechanical stability and heating efficiency. In this study, we investigate the local buckling of DHPs using limit state design (LSD). Two methods are considered: the use of the limit state for the width-thickness ratio and the use of the limit state for the strain. The results are used to confirm that the DHP is stable under local buckling. Finally, we suggest a minimum preheating temperature for avoiding local buckling.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.41-49
• /
• 2017

This paper will describe lunar lava tubes' five analyzed fields, such as geology, geomorphology, internal configuration, stability, communication and habitats requirements. This research gets through qualitative and qualitative data analysis as following results. A huge size and configuration differences between lunar lava tubes and earth one on geology and landform environments. Exo-genetics activities, such as meteorites, radiation, and sudden temperature bigger affect than Endo-genetic activities, such as effusion and earthquake of the lunar lava tubes. Landform and internal configuration of the lunar lava tubes due to the huge cave perilous landform that gravity difference have a technical limitation from internal approach and data obtain of the huge skylights and sinuous rilles. Stability of the lunar lava tubes deals with geology and landform. It was obvious geo-structural stability elements results generated on low rate of collapsed halls(skylights), low gravity, and relatively thick covers. In terms of the communication capability on the external and internal lunar lava tubes cordless communication techniques will overcome limitations of the sun-power generates supporting communication systems. Through this research it realized obvious differs between potential habitats possibility by accumulative theories by scholars and techniques of the lunar lava tubes. Especially, it is a favorable expectation throughout overcoming attempt on zero gravity, cosmo radiation, lunar dust of the exo-genetic limitations to the steep escarpment of skylights to approach and achieve techniques by the civil engineering, networking and GIS techniques as the endo-genetic environment treatment.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.81-86
• /
• 2015

PURPOSE: Bridge exercises are broadly used to develop trunk co-activation patterns that promote spine stability. This study was to analyze the trunk muscle activity during bridge exercise with various shoulder support surface(stable, sling, Swiss ball). METHODS: The subjects were 20 healthy subjects in their twenties. Subjects were performed bridge exercise on 4 different shoulder support surfaces using stable and labile instruments. 1) Bridge exercise on a stable surface. 2) Bridge exercise with their shoulder on a stable bench. 3) Bridge exercise with their shoulder on a sling. 4) Bridge exercise with their shoulder on a Swiss ball. Rectus abdominis, erector spinae, internal oblique, external oblique muscle activities were measured using electromyography. RESULTS: There were significant differences in RA, EO muscles between performing each of the 4 exercises(p<.05). RA and EO was recorded the highest activity during the bridge exercise with their shoulder on a sling. The lowest activity was recorded during conventional supine bridge on a stable surface. There were no differences found for the EO/RA and IO/RA ratio. The EO/RA and IO/RA ratio was the highest in the bridge exercise with their shoulders resting on a stable bench. CONCLUSION: These findings suggest that change of shoulder support surface during bridge exercise may be useful for enhancing the trunk stability.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.4
• /
• pp.165-174
• /
• 2000

This paper presents the application of H$\infty$ control synthesis using LMI optimization method to power system stabilizer(PSS) design. Since power system is usually operated under circumstance of unmeasurable uncertainties and external disturbances, the improvement of small signal stability becomes one of the most important issue for securing system stability and preventing low frequency oscillation phenomena. The LMI optimized H$\infty$ PSS provides robust performance and guarantees the internal stability under these operating conditions. The global optimal H$\infty$ norm is found using LMI convex optimization method which is more systematic than standard two Riccati solution method. The design results are simulated for a case study. We verified that the LMI method shows the best performance characteristic smong standard Riccati method and conventional lead/lag method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.396-408
• /
• 2008

Statement of problem: Within the elastic limit of the screw, the greater the preload, the tighter and more secure the screw joint. However, additional tensile forces can incur plastic deformation of the abutment screw when functional loads are superimposed on preload stresses, and they can elicit the loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum preload that will maximize fatigue life and simultaneously offer a reasonable degree of protection against loosening. Another critical factor in addition to the applied torque which can affect the amount of preload is the joint connection type between implant and abutment. Purpose: The purpose of this study was to evaluate the influence of tightening torque on the implant-abutment screw joint stability. Material and methods: Respectively, three different amount of tightening torque (20, 30, and 40 Ncm) were applied to implant systems with three different joint connections, one external butt joint and two internal cones. The initial removal torque value and the postload (cyclic loading up to 100,000 cycles) removal torque value of the abutment screw were measured with digital torque gauge. Then rate of the initial and the postload removal torque loss were calculated for the comparison of the effect of tightening torques and joint connection types between implant and abutment on the joint stability. Results and conclusion: 1. Increase in tightening torque value resulted in significant increase in initial and postload removal torque value in all implant systems (P < .05). 2. Initial removal torque loss rates in SS II system were not significantly different when three different tightening torque values were applied (P > .05), however GS II and US II systems exhibited significantly lower loss rates with 40 Ncm torque value than with 20 Ncm (P < .05). 3. In all implant systems, postload removal torque loss rates were lowest when the torque value of 30 Ncm was applied (P < .05). 4. Postload removal torque loss rates tended to increase in order of SS II, GS II and US II system. 5. There was no correlation between initial removal torque value and postload removal torque loss rate (P > .05).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.699-702
• /
• 2015

Financial information systems play such a pivotal role in the financial institution services that are provided for a large customers on the basis of various information including the personal information. As for the personal information collected during the transactions in the financial information systems, huge efforts and investment have been made to protect previously them from being inappropriately misused or illegally used if they could be released. Unfortunately, the frequent accidents on the leakage of sensitive personal information have occurred recently not only by external service users but even by internal system users. Therefore, the aim of this study is to suggest a model of advanced two-channel authentication for internal users in order to increase the stability of financial information systems with enhanced security.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.84-92
• /
• 2016

Cooperation of the patients in orthodontic treatment is an essential element. This study examines the internal and external restriction factors and level of cooperation for orthodontic treatment of adolescent orthodontic treatment patients, and the factors that impart influence on the level of cooperation for orthodontic treatment. 'Form for students' among the indices of internal and external restrictions for orthodontics, which is an adaption of 'Orthodontic Locus of Control Scale' was used as survey tool, and 'Reliability and Stability of the Orthodontic Patient Cooperation Scale' was used as survey tool for the level of cooperation of orthodontic patients. As the result of examination of the effect of internal and external restriction factors on level of cooperation for orthodontic treatment by compensating the general characteristics in the multiple regression analysis, it was found that the level of cooperation for orthodontic treatment is higher for the patients who believe there is strong influence of external restrictions-patents-on the events that determines orthodontic treatment. In order to enhance the level of cooperation for orthodontic treatment of adolescent orthodontic patients, there is a need to assess the relationship between the patient and parents as well as the attitude or psychological state of the patients on orthodontic treatment.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.51-61
• /
• 2000

This paper reviews fundamentals of a pseudo-static seismic design/analysis method for soil-reinforced segmental retaining walls. A comparative study on NCMA and FHWA seismic design guidelines, which are one of the most well known design guidelines for mechanically stabilized earth walls, was also performed. The results demonstrate that there exist significant discrepancies in the results of external stability analysis despite the same calculation model used in the two guidelines, due primarily to different seismic coefficient selection criteria. It is also demonstrated that the internal stability calculation model for NCMA guideline tends to yield larger seismic reinforcement force in the shallower reinforcement layers, resulting in an increased number of reinforcement layers at the top of reinforced wall and increased reinforcement lengths to ensure adequate anchorage capacity. The internal stability calculation model adopted by FHWA guideline, however, leads to redistribution of dynamic force to the lower reinforcement layers and thus results n an opposite trend of NCMA guideline. Findings from this study clearly demonstrate a need for more in-depth studies to develop a generally acceptable design/analysis method.

• Physical Therapy Korea
• /
• v.15 no.2
• /
• pp.30-37
• /
• 2008

Anticipatory postural adjustments are pre-planned by the central nervous system (CNS) before the activation of agonist muscles in the limbs, and minimize postural sway. Most previous studies on this topic have focused on upper-limb movement, and little research has been conducted on lower-limb movement. The purpose of this study was to investigate the recruitment order of left and right trunk muscles during limb movement. Fifteen healthy subjects (10 male, 5 female) were enrolled. Electro-myographic signals were recorded on the muscles of: (1) deltoid, lumbar erector spinae, latissimus dorsi and internal oblique during shoulder flexion, (2) rectus femoris, rectus abdominis, external oblique and internal oblique during hip flexion. During right upper limb flexion, the onset of left erector spinae muscle and left internal oblique muscle activity preceded the onset of right deltoid by 8.09 ms and 19.83 ms, respectively. But these differences were not significant (p>.05). A similar sequence of activation occurred with lower limb flexion. The onset of left internal oblique muscle activity preceded the onset of right rectus femoris muscle by 28.29 ms (p<.05). The onset of right internal oblique muscle activity preceded the onset of left rectus femoris muscles by 23.24 ms (p<.05). The internal oblique muscle was the first activated during limb movement. Our study established the recruitment order of trunk muscles during limb movement, and explained the postural control strategy of the trunk muscles in healthy people. We expect that this study will be used to evaluate patients with an asymmetric recruitment order of muscle activation due to impaired CNS.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2017

In order to cope with the abnormally high waves during the storm surge due to climate change, various methods have been proposed for interlocking adjacent caissons to enhance stability of harbor structures. Among the methods, it was studied the method based on an open-cell caisson having reduction effect increasing the cohesion with adjunction caissons by filling materials such as crushed rocks in an inter-cell formed by two facing open-cells which consist of transverse walls. It is necessary to investigate the shear behaviors of an inter-cell to secure the stability using calculating shear forces on inter-cell under oblique wave loadings. It was analyzed the shear force share ratio with the length of internal and external wall and the number of internal walls. Numerical results show that 60~70% of the shear load is transmitted to adjacent caisson through the internal walls, more than 30% is through the external wall. It was applicable in the assumption that filling materials was uniformly distributed in inter-cells, and further studies were worth consideration on other conditions under construction.