• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2023

This study entailed an investigation of a tensile stress measurement method for prestressed concrete (PSC) tendons by utilizing external magnetization. The target of this study are PS structures that have been constructed and in use. An optimal external magnetization based elasto-magnetic (EM) sensor was designed using finite element analysis considering various factors, such as coil arrangement and size, that could influence the PS tendons inside the PSC girder. The residual tensile stress resulting from the external magnetization of the girder was then determined. Further, theoretical verification was performed using the numerical and material data used in the finite element analysis for sensor design. The calculated values of strength of magnetization at the target location were matched with the finite element analysis results. Thus, the designed sensor and the feasibility of magnetizing the tendons inside the PSC I-girder using an EM sensor were validated.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.679-685
• /
• 1998

We have studied, by a nonisotopic in situ DNA end-labeling (ISEL) technique, frequency of apoptosis in the external granular layer (EGL) of the cerebellum after whole-body irradiation of newborn mice and intestinal crypt cell of adult mice by gamma-rays from $^{60}Co$. The extent of changes following 2 Gy(10.9 Gy/min) was studied at 2, 4, 6, 8, 12, or 24h after exposure. The maximal frequency was found 4-8h after exposure. The mice that received 0.18, 0.36, 0.54, 1.08, 1.98, or 3.96 Gy were examined 6h after irradiation. Measurements performed after irradiation showed a dose-related increase in apoptotic cells in each of the mice studied. The dose-response curves were analyzed by a linear-quadratic model; frequency(%) of apoptotic cell in the newborn mice cerebellum was ($13.49{\pm}1.175$)D+$(-1.52{\pm}0.334)D^2$+0.048($r^2=0.981$, D = dose in Gy) and frequency(number per crypt) of apoptotic cell in the intestinal crypt of adult mice was ($3.857{\pm}0.420$)D+$(-0.535{\pm}0.120)D^2$+0.155($r^2=0.952$, D = dose in Gy). It provides the basis required for a better understanding of results which will be obtained in any further studies for biological responses of radiation using newborn and adult mice.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.382-415
• /
• 2019

This study analyzes the impact of exclusive subcontracting on the input, behavior, and output of innovation in manufacturing industries of Korea. Based on the analysis of pooled cross-sectional data of 6,029 small venture firms, this study proved that the exclusive subcontracting between small venture firms and large enterprises are lowering R&D investment of small venture firms. Second, the innovation activities of small venture firms including the ratio of R&D personnel and the scope of cooperation and partnership with external organizations were lower than those of small venture firms that have non-exclusive or no relations with large enterprises. Third, the innovation performance of small venture firms such as the number of patent applications, the ratio of sales by new products, and the cumulative sales growth rate was lower than those of small venture firms that have non-exclusive or no relations with large enterprises. This study verifies that the exclusive subcontracting relationships significantly weaken the innovation process and performance of small venture firms systematically, resulting in a kind of market failure in which small venture firms have almost no incentive to facilitate innovation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.243-247
• /
• 2005

This paper describes an on-going national R&D program for the development of a gas turbine/fuel cell hybrid power generation system and related R&D activities. The final goal of this program is to develop a 200kW-c1ass gas turbine/fuel cell hybrid power generation system and achieve high efficiency over $60\%$ (AC/LHV). In the first phase of the development, a sub-scaled 60kW-class hybrid system based on the 50kW-class microturbine and the 5kW SOFC will be developed for the purpose of concept proof of the hybrid system. Core components such as the microturbine and the SOFC system are being developed and parallel preparation for system integration is being carried out. Before the core components are assembled in the final system. operating characteristics of a hybrid system are investigated from a simulated system where a turbocharger (microturbine simulator) and a modified fuel cell burner test facility (fuel cell simulator) are employed. The 60kW demonstration unit will be built up and operated to provide the valuable information for the preparation of the final full scale 200kW hybrid system.

• Corrosion Science and Technology
• /
• v.16 no.5
• /
• pp.235-240
• /
• 2017

Regional cathodic protection has significant impact on pipeline integrity management. After risk analyses of a newly built gas distribution station constructed in an area with large dwelling density, risk score was high because of potential threat caused by galvanic corrosion. Except reinforced steel in concrete, there are four kinds of metal buried under earth: carbon steel, galvanized flat steel, zinc rod and graphite module. To protect buried pipeline from external corrosion, design and construction of regional cathodic protection was proposed. Current density was measured with potential using potential dynamic test and boundary element method (BEM) was used to calculate current requirement and optimize best anode placement during design. From our calculation on the potential, optimized conditions for this area were that an applied current was 3A and anode was placed at 40 meters deep from the soil surface. It results in potential range between $-1.128V_{CSE}$ and $-0.863V_{CSE}$, meeting the $-0.85V_{CSE}$ criterion and the $-1.2V_{CSE}$ criterion that no potential was more negative than $-1.2V_{CSE}$ to cause hydrogen evolution at defects in coating of the pipeline.

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.779-878
• /
• 2004

This study was conducted to analyze the operating conditions of predenitrification process to improve the treatment efficiency in low organic loading sewage plant in use today, and to investigate the treatment efficiency of pilot plant added night soil as well as the nitrogen removal characteristics of pilot plant added carbon sources. In the operation under the condition of $BOD_{5}$ sludge load 0.03-0.28kg $BOD_{5}$/kg VSS/d and oxic ammoniac nitrogen sludge load 0.02-0.24 $kgNH_{4}^{+}$-N/kg MLVSS/d, nitrification efficiency is higher than 95%. In order to achieve 70% nitrogen removal at the T-N sludge loading 0.06kg T-N/kg VSSㆍd and the SRT 6～11 days, optimum operating factors were revealed to $CODc_{r}$/T-N ratio 9, recycle ratio 2.6, and denitrification volume ratio 0.33. At this time, denitrification capacity was approximately 0.09 kg $NO_{3}^{-}$-N/kg $CODc_{r}$; specific nitrification rate was 3.4mg $NH_{4}^{+}$-N/g MLVSS/hr; and specific denitrification rate was 4.8mg $NO_{3}^{-}$-N/g MLVSS/hr.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.430-432
• /
• 1995

In this paper, the electron beam with 1[Mrad], 2[Mrad], 4[Mrad], 8[Mrad] and 24[Mrad] is irradiated for specimen experiments on physical properties which is investigated by FTIR, and dielectric breakdown among the electrical characteristics of specimen are carried out. For the dielectric breakdown experiment, external 60 [Hz] AC voltage is applied to specimen with the rising voltage of 3[kV/cm] until dielectric breakdown occured. We made a breakdown experiment under the temperature condition of 50[$^{\circ}C$], 100[$^{\circ}C$], 150[$^{\circ}C$] in the silicone oils of dynamic viscosity of 100[cSt].

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.341-350
• /
• 2020

This study aims to verify the relationship between overseas activities and performance of Korea's SMEs during the last financial crisis. Whether overseas activity performance of enterprises differed was determined based on characteristic variables, including the degree of concentration on R&D and marketing. This study also examined how SMEs' international transactions and their performance differed based on internal variable such as the level of stock holding and firm size. This study developed a model for analyzing the relationship between the level of internationalization and performance of Koran SMEs listed in the KOSDAQ. We used firm-level data, including annual reports and various data sources such as the KISVALUE program. To smooth annual fluctuations in accounting data, we used a three-year average from 2006 to 2009 for each variable in the study. The results showed that proactive overseas activities ultimately had a positive effect on an enterprise's performance, even though it initially had a negative effect. Therefore, enterprises should focus their capacity on R&D and marketing environment. Although numerous studies have focused on the relationship between overseas activities and performance of enterprises, the present study analyzed whether enterprises should continuously engage in overseas activities and what capacities they should strengthen during a global economic recession.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.45-50
• /
• 2010

The marine pipelines laid in deep waters were evaluated to verify the resistance on the plastic collapse to heavy ambient external pressure due to hydrostatic pressure. In this study, the plastic collapse behavior of the marine pipe subjected to hydrostatic pressure was evaluated with the ovality and ratio of diameter to thickness in FE analyses. A parametric study was shown that the internal pressure increased the plastic collapse depth by increasing of the resistance to the plastic collapse. It was also shown that the collapse depth of the pipeline having a local ovality was deeper than that of the pipeline having a global ovality. Finally, the plastic collapse depth decreased when either the ratio of diameter to thickness or the ovality increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2739-2744
• /
• 2015

Development of policy incentives and policy direction in the innovation economy is always important. Innovations policy have characterized industrial dynamics, leading to a transformation of the market structure of the specific industry. The paper explores the development of industry convergence for understanding the change of the wireless industry in Daejeon. Although its initial focus is R&D center, The business model has become the research and development of external demand than its own product research and development. For regional innovation, the wireless industry policy should be provided with their own product development pattern.