• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.1-10
• /
• 2016

This paper reports the trends of researches and technologies of electronic packaging using graphene. Electronic packaging is to provide the signal and electrical current among electronic components, to remove the heat in electronic systems or components, to protect and support the electronic components from external environment. As the required functions and performances of electronic systems or components increase, the electronic packaging has been intensively attracted attention. Therefore, technologies such as miniaturization, high density, Pb-free material, high reliability, heat dissipation and so on, are required in electronic packaging. Recently, graphene, which is a single two-dimensional layer of carbon atoms, has been extensively investigated because of its superior mechanical, electrical and thermal properties. Until now, many studies have been reported the applications using graphene such as flexible display, electrode, super capacitor, composite materials and so on. In this paper, we will introduce and discuss various studies on recent technologies of electronic packaging using graphene for solving the required issues.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.47-54
• /
• 2013

Two types of reactors were set to investigate the change of characteristics of pig slurry by aeration during fertilization period. One system was equipped with air diffuser to supply oxygen to pig slurry for liquid fertilization, but there was no air diffuser in the other system. Air supply to the experimental systems was regulated by air flow meter. The reactors were set up in the laboratory to protect the pig slurry from external condition such as temperature and humidity changes. Maintaining optimal pH range in the experimental reactors is an important factor for liquid fertilization of pig slurry. In this study, pH ranges of aerobic reactor and anoxic reactor was 7.04~7.19 and 7.34~7.81, respectively. The temperature of aerobic reactors was $2{\sim}3^{\circ}C$ higher then indoor temperature. The amount of sludge accumulated at the bottom layer of non-aerated reactors was 4~5 times more than that of aerated reactors.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.906-911
• /
• 2008

Because the perimeter of buildings is strongly influenced by solar and the outdoor air temperature, the area has different environmental properties compared to the interior of a building, as in summer heat gain, and in winter heat loss. In particular, if the external wall is glass, the characteristics of the glass material make it pervious to outside conditions, thereby making big changes to the thermal environment. By combining shading device and the efficient exhaust system, an energy saving can be achieved compared to no air barrier systems. The simplified air barrier system is developed with the idea that energy could be conserved by carefully and effectively blowing out the air caught between the glass surface and the roller blind. The way it is configured is therefore by making the roller blind's air-path, and by placing the air output ducts in the most optimum positions. This simplified air barrier system will give improvement in the thermal environment of the parameter area that is strongly affected by solar and the outdoor condition.

• Elastomers and Composites
• /
• v.59 no.2
• /
• pp.73-81
• /
• 2024

In the field of electronic components, the potting material, which is a part of the electronic circuit package, plays a significant role in protecting circuits from the external environment and reducing signal interference among electronic devices during operation. This significantly affects the reliability of the components. Therefore, the accurate prediction and assessment of the lifespan of a material are of paramount importance in the electronics industry. We conducted an accelerated thermal aging evaluation using the Arrhenius technique on elastic potting material developed in-house, focusing on its insulation, waterproofing, and contraction properties. Through a comprehensive analysis of these properties and their interrelations, we confirmed the primary factors influencing molding material failure, as increased hardness is related to aggregation, adhesion, and post-hardening or thermal-aging-induced contraction. Furthermore, when plotting failure times against temperature, we observed that the hardness, adhesive strength, and water absorption rate were the predominant factors up to 120 ℃. Beyond this temperature, the tensile properties were the primary contributing factors. In contrast, the dielectric constant and loss tangent, which are vital for reducing signal interference in electric devices, exhibited positive changes(decreases) with aging and could be excluded as failure factors. Our findings establish valuable correlations between physical properties and techniques for the accurate prediction of failure time, with broad implications for future product lifespans. This study is particularly advantageous for advancing elastic potting materials to satisfy the stringent requirements of reliable environments.

• The Journal of Society for e-Business Studies
• /
• v.25 no.3
• /
• pp.109-130
• /
• 2020

Recently, the importance of research and development for technological innovation is increasing. The rapid development of research and development has a number of positive effects, but at the same time there are also negative effects that accelerate crimes of information and technology leakage. In this study, a research security level measurement model was developed that can safely protect the R&D environment conducted at the organizational level in order to prepare for the increasingly serious R&D result leakage accident. First, by analyzing and synthesizing security policies related to domestic and overseas R&D, 10 research security level evaluation items (Research Security Promotion System, Research Facility and Equipment Security, Electronic Information Security, Major Research Information Security Management, Research Note Security Management, Patent/Intellectual Property Security Management, Technology Commercialization Security Management, Internal Researcher Security Management, Authorized Third Party Researcher Security Management, External Researcher Security Management) were derived through expert interviews. Next, the research security level evaluation model was designed so that the derived research security level evaluation items can be applied to the organization's research and development environment from a multidimensional perspective. Finally, the validity of the model was verified, and the level of research security was evaluated by applying a pilot target to the organizations that actually conduct R&D. The research security level evaluation model developed in this study is expected to be useful for appropriately measuring the security level of organizations and projects that are actually conducting R&D. It is believed that it will be helpful in establishing a research security system and preparing security management measures. In addition, it is expected that stable and effective results of R&D investments can be achieved by safely carrying out R&D at the project level as well as improving the security of the organization performing R&D.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1975-1978
• /
• 2004

We developed internal and external type sensor to measure ultra-high frequency (UHF) partial discharge (PD) in 170 kV gas-insulated switchgears (GIS). We also manufactured a PD-generator to verify and measure the detection sensitivity of those sensors. We measured the output power of the UHF PD sensors induced by PDs of 5 pC using the PD-generator. We measured UHF propagation loss of an 170 kV GIS for optimal arrangement of the sensors. We used swept UHF signal from a network analyzer into the GIS to measure the loss of various components of the GIS.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2008.04a
• /
• pp.149-154
• /
• 2008

도시가스용 배관으로 사용하고 있는 폴리에틸렌 배관은 유연하여 시공이 용이할 뿐만 아니라 부식 및 전식이 일어나지 않아 유지관리가 편리하고 교체 없이 50년 이상 사용이 가능하여 금속 소재에 비하여 경제적이기 때문에 그 사용량이 증가하고 있다. 그러나 차량의 증가 등으로 인하여 매설된 배관에 많은 응력이 집중되고 있다. 따라서 토하중 뿐만 아니라 증가한 차량 등에 의한 하중이 복합적으로 작용할 경우에 매설된 배관이 어느 정도의 응력을 받고 있는지를 검토하고자 하였다. 직경이 $50{\sim}400mm$인 배관을 대상으로 매설깊이를 $0.6{\sim}1.2m$로 변화시키고 사용압력을 $0.4{\sim}4bar$로 변화시켜 그 결과를 검토하였다. 결과는 수식해와 유한요소 해석 방법을 이용하여 계산하였으며 두 결과를 비교하여 유한요소 해석 방법의 신뢰성을 높였다. 두 해석방법 모두 내압에 의한 영향, 토양하중에 의한 영향 그리고 차량 하중에 의한 영향을 각각 계산하였다. 그리고 각 하중이 복합적으로 작용할 경우에 대한 응력을 계산하여 매설 깊이에 따라 배관에 발생하는 응력을 계산하였다. 또한 가스배관 설계에 사용하는 허용응력을 4가지로 구분하여 발생한 응력과 비교하여 그 안전성을 검토하였다. 수식해와 유한요소 해석 결과를 비교하여 각각의 결과를 검증한 결과 수식해가 유한요소 결과보다 약간 높은 응력값을 나타내었으며 내압, 토하중, 차량하중 등이 복합적으로 작용할 경우에 매설깊이가 1m일 때 가장 낮은 원주방향응력이 발생하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.5-12
• /
• 2014

Weatherstrip coatings of urethane and silicon type which are fit to EPDM and thermoplastic materials are used in sealing systems for automotive applications for noise reduction and high slip characteristics for external applications, respectively. Polyurethane binder was successfully synthesized from poly(butyladiphate)diol (PBAD), poly(tetramethylene)glycol (PTMG) and isocyanate as starting materials. Then, polyurethane coating agents were prepared by using various additives. To investigate effects of segment types on the abrasion resistance of polyurethane coating agents, thin films based on polyurethane coating materials were fabricated. With increasing the amount of hard segment in the coating agent, abrasion resistance, modulus and tensile strength of the coating films were improved, but the elongation of the coating films was decreased.

• ETRI Journal
• /
• v.27 no.2
• /
• pp.206-218
• /
• 2005

We measure and compare externalities of IT and R&D capital stocks in different Korean industry sectors using inter-industry input-output tables of 1985, 1990, 1995 and 2000. We also compute the multiplier effects that relate to the directions of future economic effects. The key findings are as follows. First, we observed continuous capital deepening in all nine industries over the period of 1985 to 2000. Second, the backward multipliers of IT capital were the highest in the manufacturing industry. As for inter-industry externalities, the indirect backward multipliers, which exclude intra-industry backward multiplier effects within the industry, were also the highest in the manufacturing industry. Third, the forward multiplier effects of IT capital stock were the most substantial in the construction industry during the 1980s and in the manufacturing industry thereafter. Finally, using the transition multiplier matrix reflecting the backward effects of the two capitals in the past, the economic backward effects, especially the external economic effects, are predicted to increase through 2010 among all industries. The above findings suggest that, in order to maximize the forward and backward effects of the ever-increasing IT capital, we need to formulate an industry policy reducing the cost of capital accumulation in the manufacturing industry through improvement in productivity of the IT industry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1131-1137
• /
• 2012

Subsea pipelines have been operated with buried depths of 1.2-4m underneath the seabed to prevent buoyancy and external impacts. Therefore, they have to show resistance to both the soil load and the hydrostatic pressure. In this study, the structural integrity of a subsea pipeline subjected to soil load and hydrostatic pressure was evaluated by using FE analyses. A parametric study showed that the internal pressure increased the plastic collapse depth by increasing the resistance to plastic collapse. The hoop stress increased with an increase in the buried depth for the same water depth; however, the hoop stress decreased with an increase in the water depth for the same buried depth.