• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.703-706
• /
• 2009

The external electrode fluorescent lamp(EEFL) has recently been applied to backlight of LCD TV as a new light source. The dependence of the electro-optic characteristics of the EEFL used in direct-lit backlights on the glass thickness was examined in detail, and the ultraviolet(UV)-light efficiency was estimated. It was found that the lamp efficiency became larger as the glass thickness decreased if other conditions were the same.

• 산업기술연구
• /
• 제16권
• /
• pp.31-38
• /
• 1996

This experimental study was conducted to analyze the characteristics of centrifugal pipes which were made of silica fume concrete. External load tests showed that maximum external load ranged from 1,100~5,300kgf/m with thickness ratio(t/D) of between 4.5%~10.0%. Correlation between thickness ratios and external loads was excellent with $R^2$ of 0.99. Respective correlation between measured and computed vertical deformation was good with $R^2$ of higher than 0.90. And therefore, vertical deformation and tensile stress of centrifugal concrete pipes may be theoretically computed with a good precision.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.310-310
• /
• 2009

In the two structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/R-H : R-D/Al device, ITO/Amorphous Fluoropolymers/TPD/R-H : R-D/LiF/Al device. we studied the effect of organic materials defending on the electrical characteristics of red OLEDs. The thickness of TPD and R-H : R-D was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The AF used for an hole-injection is the thickness of 0.5 [nm] and the LiF used for an electron-injection is the thickness of 0.5 [nm]. Compared to the two from the devices made with the hole injection and without hole injection We found that the luminous efficiency and the external quantum efficiency are improved a fact of one- hundred, two, respectively.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.464-473
• /
• 2022

본 논문에서는 자율무인잠수정에 사용되는 UHF-GPS 안테나의 성능을 만족하는 경량화 설계에 대해 제안하였다. 설계 프로세스에 사용된 구조해석, 수밀외압시험 그리고 비파괴 검사는 수중운용 환경에서 발생하는 외력에 대한 구조 안전성을 고려하여 결정하였다. 먼저 수상에서 모함과 통신을 위한 UHF-GPS 안테나 성능과 수중 운용 시 발생하는 20 bar 압력을 고려한 레이돔 재질을 선정하였으며, 전자기장해석 및 구조해석을 수행하여 무게 대비 강도 및 강성이 높고 유전율이 우수한 PA-GF 소재를 선정하였다. 그리고 UHF-GPS 안테나의 요구 중량을 만족하기 위한 레이돔 두께별 전자기장해석 및 구조해석을 추가 수행하였으며, 최종 모델 선정 후 수밀외압시험 및 비파괴 검사를 통해 구조 안전성을 검증하였다.

• 기술혁신연구
• /
• 제18권1호
• /
• pp.153-175
• /
• 2010

기업은 경쟁우위를 확보하고 지속적인 성장을 이끌기 위해 기술개발을 위한 R&D 투자 및 혁신활동에 집중해야 한다. 그러나, 기업의 이러한 활동은 언제나 성공하는 것이 아니며, 기술개발의 위험도가 높고 이익의 전용가능성이 낮거나 기업내부의 역량이나 자원이 부족할 경우, 기업의 혁신활동은 저해되기 쉽다. 이러한 상황에서 외부파트너와의 연구협력은 이러한 문제들을 해결할 수 있는 좋은 전략이라고 할 수 있다. 본 연구에서는 한국의 제조업체를 대상으로 각 기업이 기술혁신을 위해 연구협력을 선택할 때 어떤 요인들이 연구 협력결정에 영향을 미치는지를 분석하였다. 이를 위해서 과학기술정책연구원(STEPI)에서 수행한 기술혁신조사 데이터를 활용하였으며, 분석결과 기업의 규모가 클수록, 과거의 연구 협력경험이 많을수록, 하이테크 기업에 속한 기업일수록 연구협력을 통해 제품혁신을 수행하는 것으로 나타났으며, 혁신실패의 위험성, 자금조달의 어려움, 조직내부의 역량부족, 외부환경요인 등과 같은 혁신활동저해요소들은 제품혁신활동 수행시 외부와의 연구협력에 영향을 미치지 못하는 것으로 나타났다.

• 한국포장학회지
• /
• 제29권3호
• /
• pp.203-209
• /
• 2023

The increasing saturation challenges in storage facilities for Low- and Intermediate-Level Radioactive Waste call for a more efficient storage approach. Consequently, we have developed a square-structured container that features a storage capacity approximately 20% greater than that of conventional drum-type containers. Considering the need to contain various radioactive wastes from nuclear power usage securely until they no longer pose a threat to human health or the environment, this study focuses on evaluating the sealing efficacy of the newly designed rectangular container using finite element analysis. Since radioactive waste containers typically do not experience external forces except under special circumstances, our analysis simulated the impact of an external force, assuming a fall scenario. After fastening the bolts, we examined the vertical stress distribution on the container by applying the calculated external force. The analysis confirms the container's stable seal.

• 한국IT서비스학회지
• /
• 제17권4호
• /
• pp.191-208
• /
• 2018

This study explores the role of knowledge sharing activities among team members and performance in R&D setting. Knowledge sharing activities are classified into two : Knowledge sharing activity within/outside team. And the relationships between the knowledge activities and R&D performance are also examined according to three R&D stages : basic, applied, and developmental research. A empirical study was conducted at a research institute of large company that leads the advanced research and development of the domestic chemical industry. Data was collected 292 copies out of 500 copies (Response rate 58.4%). The result indicated that knowledge sharing within and outside the team has a positive effect on R&D Performance. In particular, knowledge sharing within the team has a greater effect on R&D outcomes in basic research stage. Knowledge sharing outside the team has a greater effect on R&D outcomes in the development research stage. In the R&D organization, it is important that members of the team are well-connected and understanding each other, but they should encourage positive relationships with external members of the team. Depending on the R&D field of the team, the basic research field should concentrate more on knowledge sharing within the team, while the development research field should focus more on knowledge sharing outside the team.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.835-837
• /
• 2002

The 17" Backlight Unit (BLU) employing twelve EEFLs (External Electrode Fluorescent Lamp) has been developed for LCD-TV The characteristics of the EEFL BLU without dual brightness enhancement film (DBEF) were equivalent to those of CCFL (Cold cathode Fluorescent Lamp) BLU employing eight CCFLs with DBEF. Luminance, power consumption and uniformity were 12,000nits, 32watt and 80%, respectively. The inverter of EEFL Backlight Unit is composed of 2 transformers and driven by the sinusoidal waveform.

• 한국광학회지
• /
• 제15권6호
• /
• pp.490-494
• /
• 2004

평면도파로 (Planar Lightwave Circuits)를 수소처리한 후 격자를 제작하였다. 성장특성 분석 결과 격자는 거듭제곱식 (power law)에 따라서 성장되는 것을 알 수 있었다. 격자의 성장특성을 이용하여 외부 공진기 레이저용 평면도파로 격자를 설계하고 제작한 결과 예상치와 거의 일치하는 격자특성을 얻을 수 있었고, 제작된 격자로 구현된 외부 공진기 레이저에서 ∼40dB의 인접모드억압비(side mode suppression ratio)를 갖는 단일모드 발진을 관측할 수 있었다.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.186-195
• /
• 2016

The finite element modeling of a ship for hull structural analysis on the basis of new harmonized common structural rules (CSR-H) is to be extended to the cargo holds in fore and after body of a ship. Unlike the parallel middle-body where the external and internal features of hull are equal along to the longitudinal direction of a ship, in fore and after body, the external and internal features of hull vary linearly or even irregularly in forms of a surface or a curve along to the longitudinal direction of a ship. Thus, it needs lots of design man-hours for the modeling for structural analysis. In order to save man-hours in initial structural design phase of a ship, the specified 3D CAD system has been adopted in shipbuilding industry. Through the interface between CAD and CAE (rule scantling and direct strength assessment), design man-hour in initial design phase can be saved even under the environment of CSR-H.