• 한국농공학회논문집
• /
• 제48권1호
• /
• pp.91-102
• /
• 2006

Most projects of tideland reclamation with dike construction produce estuarine reservoirs, which may result in water quality problems due to blocking of natural flow of stream water to the sea. External loadings to the reservoirs through tributaries are major concerns in a concerned water quality management. The water quality of a reservoir is greatly influenced by watershed drainage, and accurate estimation of pollutant is indispensable for in the reservoir management. Concentrations of the microorganisms in stream water and conventional parameters were monitored in the 13 water quality monitoring sites located in a rural watershed of Hwaong estuarine reservoir. The indicator of microorganisms showed strong correlation between them, and regression equations with $R^2\geq0.70$ may be used fur estimating one from other microorganisms. The relationships between water quality parameters obtained in this study may be used to infer one unknown pollutant concentrations from the measured pollutant loadings. This methodology could be applied to other areas where the watershed characteristics are not significantly different from the study area. High concentrations of nitrogen was observed in water quality monitoring sites affected by urban land uses and numbers of livestock in wet day as well as dry day, due to the influent of diffuse sources.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.

• 경영정보학연구
• /
• 제3권1호
• /
• pp.19-30
• /
• 2001

With the e-business paradigm emerging, the website became a critical resource for most corporations. However, the amount of value creation through internet is still in question. This paper shows the result of an exploratory study on website assessment, following the tradition of Technology Acceptance Model (TAM). We viewed the intended usage as the value of the website and added such factors as playfulness, commitment, system quality, and information security as external variables of the model. Website types, visiting purposes, and the user system quality were included as moderators. The website value could differ depending on website types, purposes of the use and system quality. In the case of internet shopping malls, playfulness, compatibility, website quality were identified as key influencers, while for stock trading users, however, commitment and security factors are more important. In terms of user purposes, information search requires both the compatibility and the website quality. Also the website quality was strongly affected by the user system quality. In other words, any investment of upgrading the website system quality can be meaningless unless the user system quality is improved as well. For each variable considered, empirical results are discussed and practical implications are provided.

• 한국의류학회지
• /
• 제33권8호
• /
• pp.1215-1226
• /
• 2009

This study classifies consumers according to apparel shopping values to find the differences of apparel attributes in accordance to shopping value segments between Korean and Chinese college students. College students from Seoul and Beijing participated in the study and a quota sampling method collected the data. Data from 504 questionnaires is used for the statistical analysis. A factor analysis through, Cronbach's alpha coefficient, ANOVA, and a post-hoc test are conducted. Two factors of apparel shopping values are classified (hedonic shopping values and utilitarian shopping values). Four segments of apparel shopping value were classified (hedonic shopping, low involvement shopping segment, high involvement shopping, and utilitarian shopping). Three factors of apparel attribute are classified (external attributes, internal/aesthetic attributes, and internal/quality attributes). The result indicate that high involvement shopping segments considered all the clothing attributes more importantly than the other three segments. Chinese respondents of hedonic shopping segments and high involvement shopping segments considered advertisements in terms of external attributes, assembly, and fit in terms of internal/quality performance attributes as more important than Koreans. Chinese respondents of low involvement shopping segments also considered assembly and fit in terms of internal/quality performance attributes as more important than Koreans. Korean respondents of utilitarian shopping segments had a special regard for design and color in terms of internal/aesthetic attributes but the Chinese had a special regard for assembly, fit, and ease of maintenance in terms of internal/quality performance attributes.

• 한국물환경학회지
• /
• 제36권2호
• /
• pp.116-124
• /
• 2020

This study aims to identify the characteristics of organic matter and pollutant sources using water quality and stable isotope ratios (δ¹⁵N, δ¹³C) of the two inflow tributaries (Gulpo (GP) and Anyang (AY) streams). Water samples were analyzed in June and September 2018, and the results showed that the concentrations of nutrients, such as TN and NO₃-N, were increased at GP4, which is located at the downstream of sewage treatment facilities(STFs). TOC and TN ratios showed a strong positive correlation (R² = 0.77, p<0.01) at all points except for GP4. The results of GP's stable isotope ratio analysis do not appear to be a constant cluster compared to AY because GPs with large amounts of pollutants from the industry (metal processing companies, etc.) have less tributary, shorter waterway and significantly different external sources. This could be attributed to different sources of external inflow despite its smaller number of tributaries and shorter waterways than AY. In the first half of the year, the δ¹⁵5N of GP4 was affected by discharge of STFs, while AY3 seemed to have an influence of tributary than the discharge of STFs. Consequently, using water quality, stable isotope ratio and C/N, the sources of contamination in two streams with different contaminants were identified and origin was estimated.

• 한국식품영양학회지
• /
• 제10권3호
• /
• pp.287-294
• /
• 1997

When bread making, the condition of thawing-fermentation for frozen dough were tested in variable temperature, and measured thawing-fermentation time and volume of frozen dough. L-Ascorbic acid (L-Aa) was added in frozen dough for the comparison test of develop volume in bread staling degree of baking bread were measured additive frozen dough which was stoppages in freezing, staling degrees were tested hardness with Rheometer. The test for comparison of thawing-fermentation time in variable temperature was shown the condition of dough conditioner at 3$0^{\circ}C$ was most effective for bread making, Because That condition was required very short time(74 min) But, in this comparison of volume in final products was shown the products in the condition of thawing-fermentation at 3$0^{\circ}C$ was smaller than the products at 5$^{\circ}C$(418 ml). The baking volume of L-Aa additive frozen dough which has under gone thawing-fermentation at 3$0^{\circ}C$, were shown baking volume of 420 ml in 2 weeks storage terms to 100 mg/kg L-Aa additive dough and shown baking volume of 454 ml in 4 weeks storage terms to dough of 200 mg/kg additive weight. Staling degrees of L-Aa additive frozen bread were measured with Rheometer. The hardness of 100 mg/kg L-Aa additive frozen bread was sown low level hardness in 1~2 weeks freezing term, 150 mg/kg L-Aa additive frozen bread was shown low level hardness in 3 weeks freezing term. In 4 weeks freezing term, 200 mg/kg L-Aa additive frozen bread was shown low level hardness compared with non-additive L-Aa frozen bread. In comparison of frozen bread quality, non-additive L-Aa products was better than additive L-Aa products in equality of baking shape and external apparence. But in total quality in external and internal apparence, additive L-Aa products was better than non-additive L-Aa products.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.229-235
• /
• 2011

Objectives: In this study, we summarized the External Quality Assessment Scheme (EQAS) for the biological monitoring of occupational exposure to toxic chemicals which started in 1995 and continued until a $31^{st}$ round robin in the spring of 2010. The program was performed twice per year until 2009, and this was changed to once a year since 2010. The objective of the program is to ensure the reliability of the data related to biological monitoring from analytical laboratories. Methods: One hundred and eighteen laboratories participated in the $31^{st}$ round robin. The program offers 5 items for inorganic analysis: lead in blood, cadmium in blood, manganese in blood, cadmium in urine, and mercury in urine. It also offers 10 items for organic analysis, including hippuric acid, methylhippuric acid, mandelic acid, phenylglyoxylic acid, N-methylformamide, N-methylacetamide, trichloroacetic acid, total trichloro-compounds, trans,trans-muconic acid, and 2,5-hexanedione in urine. Target values were determined by statistical analysis using consensus values. All the data, such as chromatograms and calibration curves, were reviewed by the committee. Results: The proficiency rate was below 70% prior to the first round robin and improved to over 90% for common items, such as PbB and HA, while those for other items still remained in the range of 60-90% and need to be improved up to 90%. Conclusion: The EQAS has taken a primary role in improving the reliability of analytical data. A total quality assurance scheme is suggested, including the validation of technical documentation for the whole analytical procedure.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.75-81
• /
• 1998

We have studied internal quality including chemical compositions, microscopic structure and nonmetallic inclusion of test materials. We have analyzed tensile strength value, hardness value, impact value etc. In analyzing internal quality, all of the test materials showed typical ferrite+pearlite structure. But nonmetallic inclusion showed oxide and sulfide inclusions in medium carbon steels, and sulfide inclusion is S-free cutting steels. In ca+ S-free cutting steels, the calcium aluminate and sulfide complex inclusion had low-melting points as deformation of sulfide and oxide inclusion is existed. It was found that tensile strength and hardness give maximum value in medium carbon steels, where as minimum in Ca + -free cutting steels. But values of elongation, reduction of area impact are reverse. Fracture surface of impact specimen is ductile in free cutting steels but brittle in medium cabon steels.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1711-1719
• /
• 2005

In an electro statically actuated nanoelectromechanical system (NEMS) resonator, it is shown that both the resonance frequency and the resonance quality (Q) factor can be manipulated. How much the frequency and quality factor can be tuned by excitation voltage and resistance on a doubly-clamped beam resonator is addressed. A mathematical model for investigating the tuning effects is presented. All results are shown based on the feasible dimension of the nanoresonator and appropriate external driving voltage, yielding up to 20 MHz resonance frequency. Such parameter tuning could prove to be a very convenient scheme to actively control the response of NEMS for a variety of applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.97-101
• /
• 1996

In this paper, We have studied internal quality incluiding chemical compositions, microscopic structrue and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting resistence including tensile strength value, hardeness value, impact value etcs. We have compared chip treatments of test materials. In analyzing internal quality, all of test materials have typical ferrite+pearlite structure. But, nonmetallic inclusion have oxide and sulfide inclusion in medium carbon steels, mainly sulfide inclusion is existed in S-free cutting steels. In Ca+S-free cutting steels, calcium aluminate and sulfide complex inclusion, had low-melting points, as deformation of sulfide and oxide inclusion is existed. machining characteristics, cutting resistence is maximum in Ca+S-free cutting steels, minimum in medium carbon steels. Chip treatements are excellent in S-free cutting steels, similar to the Ca+S free cutting steels and medium carbon steels.