• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.208-214
• /
• 2011

In this thesis, the partial discharge according to applied voltage and variations of cross-sectional area and length of the conductor related to general condition for using cable was measured in order to study degradation diagnosis for 2-Core cable of the PVC insulator used in industrial fields for other safety installations. Also the thermal degradation conditions under various installation circumstances of cables were studied by assuming degradation conditions with each different degradation rate (50%, 67%, 100%) such as variation in degradated temperature, thermal exposure time, normal state, partially degradated state and overall degradated state for thermal degradation diagnosis. The quantity of electric discharge (V-Q) according to applied voltage was measured for measurement of inception voltage and extinction voltage. The quantity of electric discharge and the number of electric discharge (Q-N) were measured with applied voltage kept constantly. In addition, pictures were taken using SEM (scanning electron microscope) to compare the surface of external insulator to degradated state of internal insulator according to thermal degradation temperature and also compare the surface of external insulator to degradated surface state of internal insulator according exposure time of cables to thermal stress.

• The Journal of Korea Robotics Society
• /
• v.17 no.3
• /
• pp.308-313
• /
• 2022

This paper proposes a velocity control method for a permanent magnet synchronous motor (PMSM) based on the Koopman operator that does not require model parameter information except for pole-pair of the motor and external load. First, the Koopman operator is derived using observable functions and observation data. Then, the desired q-axis current corresponding to the desired velocity is generated using the relationship between the continuous-time Koopman operator and the dynamics of PMSM. Also, the dynamic equation of PMSM is expressed as a linear form in observable space using the discrete-time Koopman operator. Finally, it is applied to the linear quadratic regulator (LQR) to derive the final form of control input. To verify the proposed method, the conventional cascade PI controller and the LQR controller configured with the existing technique are compared with the proposed method in the viewpoint of q-axis current generation and velocity tracking performance in an environment with noise and external load.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.115-124
• /
• 2018

Background: Substantial empirical research has shown conflicting results regarding the influence of organizational external factors on construction risk management, suggesting the necessity to introduce a moderator into the study. The present research confirmed whether rules and regulations matter on the relationships between organizational external factors and construction risk management. Methods: Based on discouragement and organizational control theory, this research examined the effects of organizational external factors and rules and regulations on construction risk management among 238 employees operating in construction companies in Abuja and Lagos, Nigeria. A personally administered questionnaire was used to acquire the data. The data were analyzed using partial least squares structural equation modeling. Results: A significant positive relationship between organizational external factors and construction risk management was asserted. This study also found a significant positive relationship between rules and regulations and construction risk management. As anticipated, rules and regulations were found to moderate the relationship between organizational external factors and construction risk management, with a significant positive result. Similarly, a significant interaction effect was also found between rules and regulations and organizational external factors. Implications of the research from a Nigerian point of view have also been discussed. Conclusion: Political, economy, and technology factors helped the construction companies to reduce the chance of risk occurrence during the construction activities. Rules and regulations also helped to lessen the rate of accidents involving construction workers as well as the duration of the projects. Similarly, the influence of the organizational external factors with rules and regulations on construction risk management has proven that most of the construction companies that implement the aforementioned factors have the chance to deliver their projects within the stipulated time, cost, and qualities, which can be used as a yardstick to measure a good project.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2173-2178
• /
• 2008

A doubly-fed induction generator(DFIG) system has been widely used in the modem wind turbines due to variable-speed operation, high efficiency and small converter size. It is well known that an inter-turn fault of a generator is very difficult to be detected. The DFIG system uses a wound rotor induction machine so that the magnetizing current of the generator can be fed from both the stator and the rotor. This paper proposes a protection algorithm for a DFIG using the d-q equivalent circuit in the time domain. In the case of a DFIG, the voltages and currents of the rotor side as well as the voltages and currents of the stator are available. The proposed algorithm estimates the instantaneous(i.e., converted into the stationary frame) induced voltages from the rotor and the stator sides. If the difference between the two estimated induced voltages exceeds the threshold, the proposed algorithm detects the inter-turn fault. The algorithm can detect a inter-turn fault of a winding. The performance of the proposed algorithm is validated using a PSCAD/EMTDC simulator under inter-turn fault conditions and normal operating conditions such as an external fault and the change of the wind speed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.598-609
• /
• 2003

This paper describes a CMOS IF PLL frequency synthesizer. The designed frequency synthesizer can be programmed to operate at various intermediate frequencies using different external LC-tanks. The VCO with automatic amplitude control provides constant output power independent of the Q-factor of the external LC-tank. The designed frequency divider includes an 8/9 or 16/17 dual-modulus prescaler and can be programmed to operate at different frequencies by external serial data for various applications. The designed circuit is fabricated using a 0.35${\mu}{\textrm}{m}$ n-well CMOS process. Measurement results show that the phase noise is 114dBc/Hz@100kHz and the lock time is less than 300$mutextrm{s}$. It consumes 16mW from 3V supply. The die area is 730${\mu}{\textrm}{m}$$\times$950${\mu}{\textrm}{m}$.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.275-287
• /
• 2019

As game players have been more diverse and new features of digital games have been emerged in recent days, it is important to find out and understand how recent game players recognize and classify digital games. Thirty game players conducted Q-analysis of twenty-nine Q-statements extracted from previous studies on game typology. By using a QUANL program, three different types were revealed. For game classification, 'Physical Environment Centric Players' type highly values external game elements from the outside perspectives. 'Contents Centric Players' type considers internal game elements as the most important criterion. 'Emotional Experience Centric Players' type values his/her subjective feeling and thoughts. Based on this study, it is expected to make a contribution in developing a framework of game players with their perspectives on game classification.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.3
• /
• pp.388-395
• /
• 2009

Surveillance Radar System for naval vessels is a primary core sensor for command and fire control, and provides CFCS(Command and Fire Control System) information for 3-D surveillance and fire control. It's composed of Antenna, Transmitter/Receiver, Signal Processor, and Air drier, which are installed on and under deck. They should be designed and produced in order to endure at any operating circumstances. This paper analyzes load of a driving part for driving the antenna considering factors under external operating circumstances, and proposes a condition of load for maintaining fixed RPM through analyzing internal load of the driving part, and how to reduce the load to meet the condition. This paper is verified through experimental studies.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.5 no.2
• /
• pp.167-180
• /
• 1998

The purpose of this study was to explore the subjective opinions related to the weight control by using Q-methodology. Forty four adults were selected for P-sample from July to August, 1998. The collected data were analyzed by PC Quanl program. The results were as follows : There were 5 types of the adult's opinions about the weight control. Type I(Concern about weight control) : This type believes that there is a problem with general social attitudes, but the weight control it self is necessary. Type II(Health conscious) : This type believes that good health is very important and weight control is way of maintaining and improving good health. Type III(Obsessive) : This type believes that weight control is absolutely necessary no matter what it takes including extreme dietary change. Type IV(Influence by social pressure) : This type believes that the external stimulation and help is needed to motivate weight control. Type V(Self control) : This type believes that self determination is necessary regardless of social pressure.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.15-26
• /
• 2007

This paper presents a methodology to nominate and select improvement projects that are perceived as adding value to customers (both internal and external). The structure of the methodology can be explained in three "stages." First, the methodology suggests a new way of categorizing improvement opportunities, i.e. reactive-proactive, to "upgrade" the little Q-big Q categorisation. Then, it develops a roadmap that links performance indicators and improvement projects for both reactive and proactive improvements. Finally, it suggests an algorithm to select the improvement project, where the assessment of to what extent the nominated improvement projects add value to customers relies on the comparison between Overall Perceived Benefits (OPB) and Overall Perceived Efforts (OPE). The improvement project perceived as having the largest impact on adding value to customers receives the highest priority.