• 대한치과보철학회지
• /
• 제45권1호
• /
• pp.60-70
• /
• 2007

Statement of problem: The cement-type abutment would be needed for the reduction of its body in order to correct the axis and to assure occlusal clearance. In the case of intraoral preparation, there is a potential risk that generated heat could be transmitted into the bone-implant interface, where it can cause deterioration of tissues around the implant and failed osseointegration. Purpose: The purpose of this study was to assess the difference of the heat transmitting effect on external and internal connection implant types under various conditions. Material and method: For evaluating the effects of alternating temperature, the thermocoupling wires were attached on 3 areas of the implant fixture surface corresponding to the cervical, middle, and apex. The abutments were removed 1mm in depth horizontally with diamond burs and were polished for 30 seconds at low speed with silicone points using pressure as applied in routine clinical practice. Obtained data were analyzed using Mann-Whitney rank-sum test and Wilcoxon / Kruskal-Wallis Tests. Result: Increased temperature on bone-implant interface was evident without air-water spray coolant both at high speed reduction and low speed polishing (p<.05). But, the difference between connection types was not shown. Conclusion: The reduction procedure of abutment without using proper coolant leads to serious damage of oral tissues around the implant irrespective of external and internal connection type.

• 대한물리의학회지
• /
• 제10권4호
• /
• pp.113-121
• /
• 2015

PURPOSE: The purpose of this study was to determine the effect of shoulder external rotation on muscle activities of the scapular upward rotators during arm elevation. METHODS: Nineteen healthy subjects with no medical history of shoulder pain or upper extremity disorders were recruited for this study. Electromyography (EMG) was used to measure the muscle activities of the serratus anterior (SA), upper trapezius (UP), lower trapezius (LT) and infraspinatus (IS) muscles during arm elevation. The EMG activities were recorded while the subjects performed $90^{\circ}$ arm elevation with three different arm positions; palm down (PD), neutral position (NP), and palm up (PU). While seated in a chair, the subject was asked to raise the upper extremity in the sagittal plane in random order. Subjects performed $90^{\circ}$ arm elevations in three trials at each arm position. The mean EMG activity normalized by the maximal voluntary isometric contraction was analyzed across three arm positions. Repeated measures one-way ANOVA and the post hoc Bonferroni tests were used to determine the differences in muscle activities among the three arm positions. RESULTS: The EMG activities of the SA and IS were significantly greater in the PU condition than in the other conditions during arm elevation. No significant difference was noted between the NP and PD conditions during arm elevation. CONCLUSION: These results suggest that shoulder external rotation (palm up position) can be used to activate the SA. Therefore, we recommend a scapular protraction exercise in the palm up position for strengthening the SA.

• 한국경제지리학회지
• /
• 제18권4호
• /
• pp.505-521
• /
• 2015

본 연구에서는 대구 성서 3차 산업단지의 중소기업들을 대상으로 기술개발요인이 기업의 혁신성과에 미치는 영향을 기업특성의 측면에서 실증적으로 분석하고, 기술정책 측면에서의 시사점을 제안하였다. 기술개발요인을 인력, 자금 등의 기반적 요인과 외부 협력 등의 활동적 요인으로 구분하여 독립변수로 사용하였다. 연구의 결과에 따르면, 타기업 및 대학/연구기관과의 활동적 요인은 혁신성과에 유의적으로 긍정적인 영향을 미치고 있는 것으로 나타났으며, 이러한 영향은 기업규모가 평균보다 큰 기업군을 연구대상으로 간주하였을 때 나타났다. 또한 평균보다 큰 기업규모를 보유한 기업은 불확실한 경영환경에서 활동적 요인이 기업의 혁신성과를 보다 향상시키는 중요한 역할을 제공하고 있는 것으로 나타났다. 이러한 결과에 따라 기술개발정책은 인력, 장비 등 기반적 요인의 확충보다는 기업의 협력활동을 촉진시키는데 보다 초점을 두고 추진할 필요가 있으며, 정책 추진시 기업의 규모 등 특성에 따라 상이한 접근을 고려할 필요가 있다고 할 수 있다.

• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.427-436
• /
• 2008

The effect of dewpoints on annealing behavior and coating characteristics such as wettability and galvannealing kinetics was studied by annealing 0.3wt%Si - 0.1~0.4wt% Mn added interstitial-free high strength steels(IF-HSS). The 0.3wt%Si-0.1wt%Mn steel exhibited good wettability with molten zinc and galvannealing kinetics after annealing when the dewpoint of $H_2-N_2$ mixed gas was above $-20^{\circ}C$. It is shown that the wettability and galvannealing kinetics are directly related to the coverage of the external(surface) oxide formed by selective oxidation during annealing. At $N_2-15%H_2$ annealing atmosphere, the increase of dewpoint results in a gradual transition from external to internal selective oxidation. The decrease of external oxidation of alloying elements with a concurrent increase of their subsurface enrichment in the substrate, showing a larger surface area that was free of oxide particles, contributed to the improved wettability and galvannealing kinetics. On the other hand, the corresponding wettability and galvannealing kinetics were deteriorated with the dewpoints below $-20^{\circ}C$. The continuous oxide layer of network and/or film type was formed on the steel surface, leading to the poor wettability and galvannealing kinetics. It causes a high contact angle between annealed surface and molten zinc and plays an interrupting role in interdiffusion of Zn and Fe during galvannealing process.

• 한국전산구조공학회논문집
• /
• 제36권5호
• /
• pp.283-293
• /
• 2023

최근 국내에서 연간 지진 발생 횟수가 꾸준히 증가함에 따라 공공시설물에 대한 내진 보강의 필요성이 더욱 대두되고 있다. 이 연구에서는 사각 단면을 가진 철근콘크리트 기둥에서 강봉보강의 유무에 따른 내진 성능 개선 효과를 분석하기 위해 비선형 유한요소해석을 수행하였으며, 검증을 위해 구조실험결과와 비교하였다. 분석 결과, 이 연구에서 수행한 유한요소해석이 실제 강봉보강공법을 적용한 철근콘크리트 기둥의 구조 거동을 합리적으로 잘 묘사하는 것으로 나타났다. 또한, 해석 및 실험 모두 강봉보강공법 적용으로 인해 파괴모드가 취성파괴에서 연성파괴로 전환되었으며, 강도와 연성도 모두 증가하는 것으로 나타났다. 따라서, 강봉보강공법 적용을 통해 기존 철근콘크리트 기둥의 내진 성능을 효과적으로 증진시킬 수 있는 것으로 판단된다. 이 연구의 주요 결과는 향후 설계 방안 마련 등 관련 연구에 유용할 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.849-860
• /
• 2011

The buckling capacity of the cylindrical shells depends on two geometric ratios of L/R and R/t. However the effect of thickness variation on the behavior of the shells is more complicated and the buckling strength of them is sensitive to the magnitude and shape of geometric imperfections. In this paper the effects of thickness variation and geometric imperfections on the buckling and postbuckling behavior of cylindrical shells are experimentally investigated. The obtained results are presented under the effect of uniform lateral pressure. It is found in this investigation that the buckling mode can be generated in the whole length of the shell, if the thickness variation is low.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.351-368
• /
• 2017

To peruse the free vibration of curved functionally graded piezoelectric (FGP) nanosize beam in thermal environment, nonlocal elasticity theory is applied for modeling the nano scale effect. The governing equations are obtained via the energy method. Analytically Navier solution is employed to solve the governing equations for simply supported boundary conditions. Solving these equations enables us to estimate the natural frequency for curved FGP nanobeam under the effect of a uniform temperature change and external electric voltage. The results determined are verified by comparing the results by available ones in literature. The effects of various parameters such as nonlocality, uniform temperature changes, external electric voltage, gradient index, opening angle and aspect ratio of curved FGP nanobeam on the natural frequency are successfully discussed. The results revealed that the natural frequency of curved FGP nanobeam is significantly influenced by these effects.

• 한국식생활문화학회지
• /
• 제18권5호
• /
• pp.437-442
• /
• 2003

This study was conducted to confirm the effect of drying method on quality of popped rice for making salyeotgangjung(popped rice lump with malt syrup) in process of drying gelatinized rice. The drying were performed at dry oven or convection oven, at $30^{\circ}C,\;50^{\circ}C\;and\;105^{\circ}C$, respectively. There were not significant differences in the hardness of popped rice among the drying methods. The dry at $30^{\circ}C$ constant in dry oven showed higher popping rate, good external surface, uniformed and well developed internal cell size. The dry at $30^{\circ}C$ in convection oven and $50^{\circ}C$ constant temperature in dry oven showed low expansion and poor external surface, respectively. In conclusion, the drying at $30^{\circ}C$ in non-convection oven had the highest quality of popped rice for salyeotgangjung.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.157-162
• /
• 2000

The object of this work is to develop an assessment system for pipeline integrity. the system consists of four module applications for internal algorithm; the effect of corrosion in pipeline, crack, stress corrosion crack (SCC) and fatigue modules. Presently, the module of the external corrosion has been developed and the internal algorithm for the effect of corrosion in pipeline and the database of the system are described in this paper. The database of the system is separated to mainly four parts; geometry of pipeline, material properties, boundary conditions and general properties. Each components of the system are designed by user-friendly concept. This system may give a guideline for maintenance and modifications for the pipeline at the industrial sight. Furthermore, a procedure to evaluate an inspection interval is also provided.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.171-173
• /
• 2004

Electromagnetic force is one of the most important factor that effect on metal transfer mode, short-circuit rate, spatter generation rate and mechanical properties of weld metal etc. Also, shielding gas and welding current have influence on metal transfer mode in GMAW. In this paper, different ways for external electromagnetic forces are applied by attaching cylindrically rounded conducting wire solenoid on touch tip holding. With the applied electromagnetic field, the arc transfer mode changes from normal mode to rotating mode and spatter generation decreased in electromagnetic fields(N-pole). In MIG welding, the influences of electromagnetic force on the spatter generation showed different tendency as in the $CO_2$ welding. It is possible reasons were discussed.