• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.1
• /
• pp.19-26
• /
• 2019

Purpose : The aim of this study was to investigate the effects of the abdominal draw-in (ADI) exercise on the onset times of the gluteus maximus (GM) and erector spinae (ES) as well as the pelvic anterior tilt angle during prone hip extension (PHE). Methods : A total of 24 female adults were divided into two groups: those with normal abdominal muscles (n=12) and those with weak abdominal muscles (WAM; n=12). Before the intervention, the onset times of the GM and ES along with the pelvic angle during PHE were measured. Subsequently, the participants conducted the ADI exercise for 10 minutes. After conducting the ADI exercise, the onset times and the pelvic angle were re-measured. Results : In the pre-intervention comparison between the two groups, the WAM group showed faster ES onset times and higher pelvic angle than the normal group (p<0.05). In the WAM group, the ES onset times were significantly delayed after the ADI exercise (p<0.05). In both groups, the pelvic angle was significantly decreased after the ADI exercise (p<0.05). The decrease in the pelvic angle was significantly greater in the WAM group than in the normal group (p<0.05). The GM onset time was found to be not significant in all comparisons (p>0.05). Conclusion : Therefore, it can be concluded that after performing the ADI exercise, the pelvic anterior tilt during PHE is decreased in normal women and those with WAM, especially in the WAM group, suggesting that the ADI exercise can reduce the compensatory pelvic anterior tilt more effectively by delaying the ES onset times.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.1
• /
• pp.1-9
• /
• 2007

Objectives : This report was performed to evaluate the effect of flexion-extension technique in Bertolotti syndrome and scoliosis. Methods : We performed the flexion-extension technique to the patient with scoliosis and Bertolotti syndrome. Results : After flexion-extension technique the result of VAS of lumbago, cobb's angle were improved significantly. Conclusions : It is suggested that flexion-extension technique might be effective for the patient with scoliosis and Bertolotti syndrome.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.235-257
• /
• 2004

The purpose of this study was to analyze the kinematical traits variables when performing Uchimata(inner thigh reaping throw) by Voluntary Resistance Levels(VRL) and two postures of Uke in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games, and one male trainee Y. I. University representative member(SDK) and were filmed on two S-VHS 16 mm video cameras(60fields/sec.), that posture of Uke were Shizenhontai(straight defensive posture) and Jigohontai(straight natural posture), VRL of Uke were 0% and 100%. The kinematical variables were temporal(total time-required: TR), potures and COG variables etc., The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing according to each posture and VRL, from the data analysis and discussion, the conclusions were as follows : 1. Temporal variables total time-required(TR) when performing Uchimata was shown the shortest time YH than SDK by each posture and VRL. TR of each posture were shown the shorten trends or equal in DP by lower than NP, In existence and / or nonexistence of VRL was shown the shorten trends in VRL 0% than 100% of Uke. 2. Posture variables : In attacking right knee angle, YH was performing flexion($147{\rightarrow}103degree$) from Tsukuri(set-up) to Kake(execution) in regardless of postures and VRLs, SDK was performing not exchange extension and flexion in VRL 100%, and extension($120{\rightarrow}142degree$) in VRL 0%, respectively. In supporting left hee angle, YH was performing extension($119{\rightarrow}163degree$) from Tsukuri(set-up) to Kake(at(execution) in regardless of postures and VRLs, SDK extension($93{\rightarrow}139degree$), respectively. In attacking right hip angle, from Tsukuri to Kake, YH was performing extension($133{\rightarrow}169degree$), except in VRL 0%($156{\rightarrow}137degree$) NP, SDK was performing flexion($159{\rightarrow}126degree$) accept in VRL 100%($149{\rightarrow}152degree$) NP, In left hip angle, from Tsukuri to Kake, YH was performing flexion NP(70, 50degree) more than DP(27, 57degree), SDK was performing flexion DP(73, 52degree) more than NP(34, 20degree). 3. COG variables : When performing Uchimata, vertical COG variables was shown YH(:$2{\sim}8cm$), SDK(:$15{\sim}24cm$) lower than Uke's COG level position, in existence and / or nonexistence of postures and VRL, during Kake as maximum force point of throwing techniques in Judo.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.523-532
• /
• 2013

When the golf club hits the ground prior to making contact with the golf ball, we define it as 'fat shot'. The aim of this research was to investigate the difference between normal shot and fat shot in golf. Five candidates playing as recreational golfer participated in this research and they were all right-handed people. Time phase between each event, wrist cocking angle, elbow extension-flexion angle, backswing height, pelvis angle, thorax angle, L-GRF, R-GRF, pelvis linear velocity, pelvis angular velocity and COG path were calculated. For statistical analysis the paired T-test was used. An early un-cocking, an early right elbow extension and impact with leaving their weight behind foot were not reasons of fat shot. Backswing height, X-Factor, pelvis angle and thorax rotation angle were not different between normal shot and fat shot. But we could find a pattern of abrupt pelvic movement and weight shift to target direction just before impact in case of fat shot. In addition fat shot showed time-delayed and small value of pelvis linear velocity pattern to upward during downswing phase as against normal shot.

• Journal of Veterinary Clinics
• /
• v.39 no.3
• /
• pp.93-99
• /
• 2022

The present study was performed to compare cranial tibial wedge osteotomy (CTWO) and tibial plateau leveling osteotomy (TPLO) through radiographic evaluation. The experiment was conducted with five cadaver dogs [mean (± SD) weight, 32.9 ± 4.1 kg; mean (± SD) age, 6 ± 2 years; three males and two females] euthanized for reasons unrelated to this study. The cadaver dogs consisted of German Shepherd (n = 3), Belgian Malinois (n = 1), and mixed breed (n = 1). CTWO and TPLO were carried out by the standard surgical method. Radiographic evaluation was performed by comparing several factors, including the flexion and extension angles, the anatomical mechanical axis angle (AMA-angle), tibial length, patellar height measurement using the Labelle-Laurin method, mechanical medial proximal tibial angle (mMPTA), mechanical medial distal tibial angle (mMDTA), and frontal plane alignment (FPA). Both the CTWO and the TPLO groups showed significantly increased flexion angles after surgery. Only the CTWO group had significantly increased extension angle. Although both groups showed significant decreases in the AMA-angle, the mechanical axis moved cranially against the anatomical axis only in the CTWO group. The patellar height was significantly lowered in the CTWO group. No significant differences were found in mMPTA, mMDTA, or FPA. In conclusion, radiographic comparison revealed more changes in CTWO group than in TPLO group.

• Macromolecular Research
• /
• v.8 no.5
• /
• pp.224-230
• /
• 2000

Molecular mechanics technique has been used for finding energy-minimized conformation to understand the mechanism of yielding of glassy polymers in atomistic level. As a model polymer, amor- phous isotactic polypropylene (iPP) was generated by molecular mechanics and molecular dynamics methods. The stress-strain cone was successfully obtained by using molecular mechanics technique. The torsional angle distribution showed no significant change during extension, although the torsional angles of certain bonds in polymer backbone changed more largely than other bonds. No significant change in the van der Waals interaction is observed at yielding point, whereas the torsional angle energy starts to decrease at yield strain.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1760-1770
• /
• 2018

This paper presents a control bandwidth extension method for inverters with a low carrier ratio. The bandwidth is extended at the price of decreasing the phase margin. Then the phase margin is compensated by introducing an extra leading angle into an inverse Park transformation. The model of the controller with the proposed method is established. The magnitude and phase characteristics are also analyzed. Then the influence on system stability when the leading angle is introduced is analyzed. The proposed method is applied to design an inverter controller with both a large bandwidth and a desired phase margin, and the experimental results verify that the controller performs well in the steady-state and in terms of transient response.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.58-64
• /
• 2007

The clamping force of a jaw pad is determined by the displacements of main part when two lockers are locked, after the clamping angle of a locker was set up in the wedge type rail clamp for a container crane. In this time, if the resistance of wedge frame generates due to several factors, the clamping angle of a locker to display the initial clamping force will be changed because of the reduction of displacement of extension bar. This resistance is determined by the eccentric distance between the roller and the wedge, and by the gap between the wedge frame and outer frame. In this study we measured the tensile force of both extension bar through the performance test of the prototype rail clamp in order to evaluate the effect of the resistance of wedge frame on the clamping force of the wedge type rail clamp.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.179-184
• /
• 2001

The objective of this work is to develop the capability to analyze accurately the mixed-mode propagation of a crack in composite structures with elastic orthotropic material stiffness properties and anisotropic material strength characteristics. We employ the normal stress ratio theory to predict the direction of crack extension. It is shown that the angle of crack extension can be altered by the use of second order term in the series expansion is important for the accurate determination of crack growth direction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.77-86
• /
• 2002

An experimental study of the vortex interaction characteristics of a delta wing/LEX configuration was conducted in a wind tunnel using the micro water droplet and laser beam sheet visualization technique. The main focus of this study was to analyze the effect of the angle of attack and sideslip angle on the vortex interaction and vortex breakdown. These tests were accomplished at angles of attack between $16^{\circ}$ and $28^{\circ}$ and sideslip angle between $0^{\circ}$ and $-15^{\circ}$ at free-stream velocity of 6.2 m/s. Flow visualization data provide a description of the vortex interaction between LEX and wing vortices, and of the vortex breakdown. The introduction of LEX vortex stabilized the vortical flow, and delayed the vortex breakdown up to higher angle of attack. The vortex interaction and breakdown was promoted on the windward side, whereas they are suppressed on the leeward side.