• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.417-426
• /
• 2015

The representative design elements of the road geometric structure are longitudinal slope, horizontal curve radius, super elevation, and transition curve. According to the function of a road, the design standards of these elements is applied by diverse combinations of them. This study divided expressway into homogeneous segments based on longitudinal slope and horizontal curve radius. And then, data required for analysis were matched to each segment, and the safety performance function was built by using the established data. crash modification factors which can explain traffic accident exposure rate were calculated. When the threshold value of horizontal curve radius R=1,000 m was set to 1.0, the crash modification factors at R=300 m was calculated as 1.33, which means that the accident exposure rate is increased by 33%. When the threshold value of the longitudinal slope 0% was set to 1.0, the crash modification factors demonstrated that the accident exposure rate decreases on the upward slope and the accident exposure rate increases on the downward slope. The results of this study can be used as basic information in the design of expressway geometries during the improvement or the construction of expressways.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.458-467
• /
• 2017

The expressway of the Korea has an important role in freight movement because 76 percent of the commodity is transported by trucks. However, there has been few indices on the role of expressways regarding freight transportation and truck traffic. The objective of this study is to propose four freight transportation related indices using ITS-related system such as TCS and HS-Wim: total truck's travel miles ($veh{\cdot}km/year$), total freight transport miles ($ton{\cdot}km/year$). efficiency of truck's travel ($veh{\cdot}km/km$), and efficiency of freight movement ($ton{\cdot}km/km$). These truck and freight related indices were estimated and compared by two different data sources: traffic volume data using VDS and OD data using TCS. These indices were designed to estimated on real time and updated every day and month.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.437-444
• /
• 2012

This study intended to improve traffic safety in work zones using fluorescent orange color traffic signs. For this end, the current problems of existing traffic signs and facilities in work zones were analyzed and some good examples of foreign countries were compared. More specifically, in order to identify current problems, the basic shape and color of traffic signs in use were examined through literature review, surveys and field studies. It was found that the fluorescent color worked more effectively than other colors in terms of visibility and conspicuity in work zone sign system. For evaluation, both Conspicuity surveys and in-door simulator experiments were conducted to effectively assess the merits and demerits of different types of traffic signs for work zones. The results of evaluations showed that black lettering on a fluorescent orange background outperformed more than 70% in terms of visibility and ability to call drivers' attention compared with those from black/red lettering on yellow/white backgrounds currently used at work zones on expressways and national highways. In addition, simulated driving experiment disclosed that drivers recognized the fluorescent orange background sign 15m ahead compared with the yellow background sign and 25m ahead compared with the white background sign, respectively. As for the diamond-shaped "Under Construction" sign, drivers recognized fluorescent orange background 11m ahead compared with the yellow background sign and 19m ahead compared with the white background sign, respectively.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.73-82
• /
• 2016

PURPOSES: The national highways and expressways in Korea constitute a total length of 17,951 km. Of this total length of pavement, the asphalt pavement has significantly deteriorated, having been in service for over 10 years. Currently, hot in-place recycling (HIR) is used as the rehabilitation method for the distressed asphalt pavement. The deteriorated pavement becomes over-heated, however, owing to uncontrolled heating capacity during the pre-heating process of HIR in the field. METHODS: In order to determine the appropriate heating method and capacity of the pre-heater at the HIR process, the heating temperature of asphalt pavement is numerically simulated with the finite element software ABAQUS. Furthermore, the heating transfer effects are simulated in order to determine the inner temperature as a function of the heating system (IR and wire). This temperature is ascertained at $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, and $800^{\circ}C$ from a slab asphalt specimen prepared in the laboratory. The inner temperature of this specimen is measured at the surface and five different depths (1 cm, 2 cm, 3 cm, 4 cm, and 5 cm) by using a data logger. RESULTS: The numerical simulation results of the asphalt pavement heating temperature indicate that this temperature is extremely sensitive to increases in the heating temperature. Moreover, after 10 min of heating, the pavement temperature is 36%~38% and 8%~10% of the target temperature at depths of 25 mm and 50 mm, respectively, from the surface. Therefore, in order to achieve the target temperature at a depth of 50 mm in the slab asphalt specimen, greater heating is required of the IR system compared to that of the gas. CONCLUSIONS : Numerical simulation, via the finite element method, can be readily used to analyze the appropriate heating method and theoretical basis of the HIR method. The IR system would provide the best heating method and capacity of HIR heating processes in the field.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.77-88
• /
• 2004

This study aims at developing the model that is able to detect the compression wave, which is included as a similar situation in incidents, that causes false applicable to the similar character such as incidents in the incident detection model for expressways. In this study, it has been checked whether the number of false alarms is decreased or not by modularizing this model for being able to applicable to other models such as DES and DELOS, etc. which do not perform the compression wave test based on the compression wave test process of APID model which has been being used in the expressway traffic management system currently. The evaluation in this study focuses on the sensitivity of the model and the results analysis is performed classified by each polling cycle. And how well these models are working is evaluated by each polling cycle. In addition to this, the detection rate, the false alarm rate and the average detection time in both the existing models and the model in this study are calcuated. As a result of appling the model in this study, it is found that the false alarm rate is improved through the reasonable decrease in the number of false alarm frequencies and there are not remarkable changes concerning the detection rate and the average detection time. To sum up, it is expected that a good number of improvement effects will be occurred when this model is applied to the actual expressway traffic management system.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.377-386
• /
• 2021

In dense cities, which are covered by many impermeable areas, rainwater flows quickly along the roads and collects in certain areas. The surface runoff that fails to get intercepted by the roadside rain gutters results in a wider flow of water along the sides, which in turn increases the amount of water on the road and causes traffic congestion as well as accidents due to slippage. Based on these issues, this study was carried out in order to propose an intercepted flow calculation formula. To this end, the maximum longitudinal slopes of arterial roads and expressways were reflected to depict a road condition of 2~10 %, while a general traverse slope of 2 % was selected for the traverse slope on the side. As for the road lane condition, two, three, and four lanes were chosen for the area from the centerline to the sidewalk. As for the experimental flow rate, the rainwater runoffs at the actual design frequency of 5, 10, 20, and 30 years for road conditions were converted into experimental flow rates, and as a result, flow rates ranging from 1.36 l/s to 3.96 l/s were divided into ten flow rates for a hydraulic experiment. Also, an equation taking into consideration the inflow velocity and flow width along the roadsides was proposed. The results of the experiment showed an increase in flow width and a decrease in interception rate. Also, the inflow velocity at a traverse slope of 2 % was measured, while increasing the longitudinal slope. Accordingly, an equation for calculating the flow intercepted by rain gutters at a flow width reflecting the longitudinal slope of the road and rainwater runoff, according to the design frequency, was derived by performing a regression analysis using IBM SPSS Statistics 24. It is deemed that the equation derived in this study will be useful in designing rain gutters for roads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.31-43
• /
• 2019

Take-overs occur in autonomous vehicles at levels 3 and 4 based on SAE. For safe take-over, it is necessary to set the time required for diverse drivers to complete take-over in various road conditions. In this study, take-over time and stabilization characteristics were measured to secure safety of take-over in autonomous vehicle. To this end, a virtual driving simulator was used to set up situations similar to those on real expressways. Fifty drivers with various sexes and ages participated in the experiment where changes in traffic volume and geometry were applied to measure change in takeover time and stabilization characteristics according to various road conditions. Experimental results show that the average take-over time was 2.3 seconds and the standard deviation was 0.1 second. As a result of analysis of stabilization characteristics, there was no difference in take-over stabilization time due to the difference of traffic volume, and there was a significant difference by curvature changes.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.456-467
• /
• 2018

This study analyzed the repeated causes of policy failure focusing on Yangyang International Airport cases. Yangyang International Airport, which opened in 2002, was built with about 360 billion won, but it is considered as a representative example of policy failure of local airports. According to the policy failure theory, the failure factors of Yangyang International Airport are anlyzed by rationalistic, political, and environmental complexity viewpoint. The results are as follows. First, from a rationalist point of view, Yangyang Airport failed to achieve the policy goal of securing passengers and revitalizing local economy, This is due to the pressure of politics and the lack of geographical infrastructure. Second, the failure of the stakeholders to resolve conflicts in the flow of politics can be seen as the conflict between the airline and the airport, and the failure to reconcile conflicts between the government and the airports on the low cost airline permits and subsidies. Third, from the viewpoint of environmental complexity, Yangyang International Airport can be regarded as a failure to adapt to environmental changes such as the opening of nearby expressways and railway lines, and the sharp decline of Chinese tourists. This study sugeests the establishment of an independent organization that can prevent unreasonable business promotion by politics in the case of large scale national projects, the linkage with the surrounding infrastructure and related businesses in the case of transportation facilities such as airports and railways, and institutionalization of cooperative governance for coordinating conflict among stakeholders.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.537-548
• /
• 2022

It is important to design the pavement thickness considering heavy-duty traffic loads, which can cause excessive stress and strain in the pavement. Port-rear roads and industrial roads have many problems due to early stress in pavement because these have a higher ratio of heavy loads than general roads such as national roads and expressways. Internationally, composite pavement has been widely applied in pavement designs in heavy-duty areas. Composite pavement is established as an economic pavement type that can increase the design life by nearly double compared to that of existing pavement while also decreasing maintenance and user costs. This study suggests a thickness design method for composite pavement using roller-compacted concrete as a base material to ensure long-term serviceability in heavy-duty areas such as port-rear roads and industrial roads. A three-dimensional finite element analysis was conducted to investigate the mechanical behavior and the long-term pavement performance ultimately to suggest a thickness design method that considers changes in the material properties of the roller-compacted concrete (RCC) base layer. In addition, this study presents a user-friendly catalog design method for RCC-base composite pavement considering the concept of linear damage accumulation for each container trailer depending on the season.