• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.629-632
• /
• 2003

This paper has been studied analysis and design of microstrip Rotman lens operating over wide band and wide steering angle by the contour integral method along with the segmentation method. All mutual coupling, internal reflections between ports with exponential taper are taken into account. Equally spaced ports are designed and realized which gives less amplitude ripple at array ports. The measured results of 12 input and 12 output lens show $\pm$1.8 dB insertion loss deviation over 6~18GHz wide frequency range and beam steering accuracy less than 1$^{\circ}$ over $\pm$53$^{\circ}$ angle and agrees well with the analysis results.

• 한국환경과학회지
• /
• 제33권7호
• /
• pp.453-462
• /
• 2024

This study was carried out for the purpose of selecting the most appropriate taper equation for the actual stands of Pinus thunbergii in the southern coastal region of Korea and then developing a stem volume table to provide basic data for rational management. To develop a volume table of Pinus thunbergii in this region of Korea, 59 sample trees with various diameter distributions were selected and stem analysis was performed. As a result of stem analysis, two trees with abnormal diameter and height growth as the age increased were rejected, and 57 trees were analyzed. To develop the taper equation, seven major variable exponential equations were used, including Kozak 1988, 1994, 2001, 2002, Bi 2000, Muhairwe 1999, and Sharma and Parton 2009. As a result of parameter estimation and statistical verification, the Kozak 1988 model showed the highest goodness of fit with Fit I (Fit Index), RMSE 1.5620, Bias 0.0031, and MAD 1.0784. The diameter of each 10cm stem ridge for the selected model was estimated, and a stem volume table was produced using the mensuration of division (end area formula) using the Smalian equation. As a result of two-sample T-test for volume table of this study and current yield table, the volume for this study was found to be significantly larger at all observation points (p < 0.001). Even for the same tree species, it is judged that differentiated volume tables are needed for each growth environment characteristic.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.25-28
• /
• 2001

The problem considered is the buckling of a rectangular orthotropic plate, tapered in thickness in a direction parallel to two sides and compressed in that direction. Curves are presented showing the variation of buckling stress coefficient with the special loads. The type of thickness variation is exponential. While this paper is presented how to design for an efficient orthotropic plate taper from physical consideration.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.68-71
• /
• 2004

The limitation of telegrapher's equations for analysis of nonuniform transmission lines is investigated here. It is shown theoretically that the input impedance of a nonuniform transmission line cannot be derived uniquely from the Riccati equation only except for the exponential transmission line of a particular frequency-dependent taper. As an example, the input impedance of an angled two-plate transmission line is calculated by solving the telegrapher's equations numerically. The numerical results suffer from larger deviation from its rigorous solution as the plate angle increases.

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.105-109
• /
• 2017

In this paper is proposed wide band reconfiguration antenna by using PIN diode. The proposed antenna consisted of elliptical dipole and exponential taper balun. The proposed new matching method was exponential tapered balun in this paper. The research paper comprised of two PIN diode and Elliptical dipole. This paper used CPW to CPS feed. We obtained a good band width characteristics result by simulating. This antenna is designed to apply ISM and WiFi band.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.19-49
• /
• 2023

The present study proposes a theoretical and numerical investigation on the dynamic response behaviour of a functional graded (FG) ceramic-metal tapered rotor shaft system, by the differential quadrature finite elements method (DQFEM) to identify the natural frequencies for modelling and analysis of the structure with suitable validations. The purpose of this paper is to explore the influence of heat gradients on the natural frequency of rotation of FG shafts via three-dimensional solid elements, as well as a theoretical examination using the Timoshenko beam mode, which took into account the gyroscopic effect and rotational inertia. The functionally graded material's distribution is described by two distribution laws: the power law and the exponential law. To simulate varied thermal conditions, radial temperature distributions are obtained using the nonlinear temperature distribution (NLTD) and exponential temperature distribution (ETD) approaches. This work deals with the results of the effect on the fundamental frequencies of different material's laws gradation and temperature gradients distributions. Attempts are conducted to identify adequate explanations for the behaviours based on material characteristics. The effect of taper angle and material distribution on the dynamic behaviour of the FG conical rotor system is discussed.

• 한국산림과학회지
• /
• 제106권4호
• /
• pp.480-486
• /
• 2017

본 연구는 국내 소나무, 잣나무, 낙엽송을 대상으로 입목의 총재적 중 상부직경 혹은 상부수고까지의 재적을 예측하는 이용재적모델을 개발하고자 수행되었다. 모델개발을 위하여 사용된 자료는 강원 및 경북지역의 소나무림, 잣나무림, 낙엽송림에서 수집한 총 131본의 수간석해목이었으며, 이용재적비율, 단순비율형태, 지수비율형태의 6개 이용재적식을 검토하여 최종모델을 개발하였다. 본 연구의 분석결과, 상부직경까지의 이용재적예측은 지수비율형태인 $V_d=V_t\{{\exp}[{\alpha}_1(d^{{\alpha}_2}/D^{{\alpha}_3})]\}$ 이 상부수고까지의 이용재적예측은 단순비율형태인 $V_h=V_t\{1+{\beta}_1(P^{{\beta}_2}/H^{{\beta}_3})\}$이 최종모델로 선정되었다. 본 연구에서 선정된 2개의 최적모델식을 정리하여 내재간곡선식을 도출하였으며, 이를 활용해 상부직경에 따른 상부수고와 상부수고에 따른 상부직경 예측이 가능하였다. 본 연구결과에서 개발된 모델은 높은 정확도뿐만 아니라 임업현장에서 편리하게 사용할 수 있어 활용도가 높을 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.769-776
• /
• 2003

본 논문은 경계적분법과 세그멘테이션 기법을 이용하여 광대역 주파수 및 광 조향각 범위에서 빔조향이 가능한 마이크로스트립 로트만 렌즈의 해석 및 설계를 제안하고 있다. 렌즈 각 포트간의 모든 상호결합과 다중반사 및 선로간 불연속 특성이 해석에 포함되었다. 등간격 포트 설계를 통해 광조향각 범위에서 배열포트의 출력 리플을 억제하는 구조를 구현하였다. 12 입력 12 출력의 각 포트에 지수함수 테이퍼를 적용하여 임피던스 정합 및 포트간 상호결합을 해석하고 최적화하였다. 제작된 렌즈는 측정결과 6~18 GHz의 광대역 주파수 범위와 $\pm$53$^{\circ}$의 조향각 범위에 대해 $\pm$1.8 dB 이하의 삽입손실 편차와 1$^{\circ}$이하의 조향 정확도를 가지며, 해석결과 와도 잘 일치함을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.737-748
• /
• 2018

The current study presents a new technique in the framework of the nonlocal elasticity theory for a comprehensive buckling analysis of Euler-Bernoulli nano-beams made up of bidirectional functionally graded material (BDFGM). The mechanical properties are considered by exponential and arbitrary variations for axial and transverse directions, respectively. The various circumstances including tapering, resting on two-parameter elastic foundation, step-wise or continuous variations of axial loading, various shapes of sections with various distribution laws of mechanical properties and various boundary conditions like the multi-span beams are taken into account. As far as we know, for the first time in the current work, the buckling analyses of BDFGM nano-beams are carried out under mentioned circumstances. The critical buckling loads and mode shapes are calculated by using energy method and a new technique based on calculus of variations and collocation method. Fast convergence and excellent agreement with the known data in literature, wherever possible, presents the efficiency of proposed technique. The effects of boundary conditions, material and taper constants, foundation moduli, variable axial compression and small-scale of nano-beam on the buckling loads and mode shapes are investigated. Moreover the analytical solutions, for the simpler cases are provided in appendices.

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.836-844
• /
• 2006

본 논문에서는 근역장 측정에 사용되는 이중 리지드 도파관 구조 광대 역 프로브를 설계 및 제작하였다. 광대역 임피던스 정합을 위해 구형 도파관 내에 지수함수 테이퍼 리지를 삽입시킨 구조를 이용하여 구현하였다. 프로브는 $VSWR\leq2.2$를 기준으로 하한 주파수 8.2 GHz에서 상한 주파수 18 GHz까지 2.2:1의 대 역비를 갖는 광대역 특성을 보였으며 대역폭 내에 왜곡 없는 안정된 복사 패턴을 가지면서 4.5 dBi 이상의 이득을 가졌다. 설계한 광대역 프로브를 이용하여 근역장 측정 시스템을 적용하여 정확한 측정 결과를 얻을 수 있었다.