• 한국융합학회논문지
• /
• 제10권6호
• /
• pp.269-279
• /
• 2019

본 연구에서는 도박중독자 가족을 위한 긍정심리기반 음악치료프로그램이 도박중독자에 대한 명시적, 암묵적 태도 변화를 발생시키는지 알아보고자 하였다. 도박문제관련 상담센터를 이용하거나 단도박가족모임(GAM-ANON; 이하 GA)에 참여하고 있는 도박중독자 가족들을 대상으로 연구를 진행하였다. 실험집단(n=11)은 8회기의 긍정심리기반 집단 음악치료 프로그램에 참여하였으며, 비교집단(n=8)은 8회기의 개인상담을 실시하거나 GA 가족모임에 참석하였다. 치료 효과를 확인하기 위해 가족관계에 대한 태도를 명시적(가족관계척도), 암묵적(IAT; Implicit Assoication Task) 방식으로 측정하였으며, 그 외에 자기보고식 방식으로 정서 및 분노(PANAS, HBDIS)의 변화를 함께 확인하였다. 연구결과, 긍정심리기반 음악치료프로그램에 참여한 집단은 비교집단에 비하여 긍정정서가 유의하게 증가하였다. 그러나 치료집단의 암묵적인 태도의 경우, 가족과 부정단어를 연합시키는 속도가 유의하게 빨라졌으며, 이는 치료를 통해 도박중독자 가족들이 중독자 가족에 대한 부정적 감정이 선명하게 드러날 수 있음을 시사한다. 향후에는 도박중독자들의 가족 구성원들의 태도 변화를 직접적으로 이끌 수 있는 치료 프로그램이 제공되어야 할 필요성에 대해 논의하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.625-628
• /
• 1995

A static/implicit finite element code for sheet forming (ITAS3D) is parallelized on IBM SP 6000 multi-processor computer. Computing-load-balanced domain decomposition method and the direct solution method at each subdomain (and interface) equation are developed. The system of equations for each subdomain are constructed by condensation and calculated on each processor. Approximated operation counts are calculated to set up the nonlinear equation system for balancing the compute load on each subdomain. Th esquare cup tests with several numbers of elements are used in demonstrating the performance of this parallel implementation. This procedure are proved to be efficient for moderate number of processors, especially for large number of elements.

• 오토저널
• /
• 제12권6호
• /
• pp.48-59
• /
• 1990

A finite element program was developed using line elements for simulating the stretch/draw forming operation of an arbitrarily-shaped plane-strain section. An implicit, incremental, updated Lagrangian formulation is employed, introducing a minimum plastic work path assumption for each time step. Geometric and material nonlinearities are also considered within each time step. The finite element equation is based on the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The membrane approximation is adopted under the plane stress assumption. The sheet material is assumed to obey a rigid-viscoplastic constitutive law. The developed program was tested in the die-tryout of typical automotive inner panels. In order to determine a single friction coefficient and boundary length, FEM results and measurements of thinning for a stretched section of final die were compared. After finding analysis parameters, the sheet forming operations of original and final die designs were simulated. Excellent agreement between measured and computed thickness strains was obtained and the developed program was able to identify die designs which were rejected during die tryout.

• 방송공학회논문지
• /
• 제18권1호
• /
• pp.88-97
• /
• 2013

개인화된 추천을 제공하기 위한 협력 필터링은 추천 시스템에서 성공적으로 활용되어 온 기법이다. 그러나 협력 필터링이 주로 연구 및 적용된 분야들은 사용자로부터의 명시적 피드백이 존재하는 독립된 아이템들을 추천하는 것에 초점을 두고 있다. VOD 서비스 플랫폼에서 개인화된 TV 프로그램을 추천하기 위해서는 해당 도메인의 특성과 제한들을 고려하는 것이 필요하다. 본 논문에서는 TV 프로그램의 시리즈 속성을 이용하여, 선호를 판단하기 힘든 비명시적 피드백인 회별 프로그램 시청기록을 명시적이고 지속적인 프로그램 선호도로 변환하는 방법을 고안하였다. 데이터 수집과 최종 추천은 회별 프로그램 단위로 이루어지면서 협력 필터링 처리 단위는 프로그램으로 변경되어 TV 프로그램 VOD 추천 환경에 가장 적당한 형태로 협력 필터링을 변형 적용하였다. 실험 결과는 고안된 추천 시스템이 단순히 협력 필터링을 적용했을 때보다 높은 정확도와 더 적은 계산량을 가지는 것을 보여준다. 도메인 특화된 이러한 변형은 추천 시스템의 알고리즘 모듈로 구성되어 기존에 알려진 다양한 협력 필터링 기법과 결합하여 사용될 수 있다.

• Journal of Contemporary Eastern Asia
• /
• 제17권1호
• /
• pp.94-111
• /
• 2018

This study examines Korea's international development volunteer program as a citizen diplomacy initiative. Informed by a cultural perspective of transmission and relational models of public diplomacy, I examine the ways in which volunteer training incorporates cultural-learning into its program. The study finds that volunteer training is largely based on an instrumentalist approach to culture that places emphasis on learning the "explicit" side of culture, such as Korean traditional dance, art, and food as a strategy to promote the country's national image. In contrast, much less covered in the training program is a relational approach to culture-learning that is guided by a reflexive understanding of the "implicit" side of culture, or the values and beliefs that guide the worldviews and behavior of both volunteers and host constituents. Whereas the value of the volunteer program as a citizen diplomacy initiative is in its potential to build relationships based on two-way engagement, its conception of culture is mostly guided by that of the transmission model of public diplomacy. Based on the findings, this study calls for an integrated approach to culture-learning in volunteer training program to move the citizen diplomacy initiative forward.

• 대한화학회지
• /
• 제57권1호
• /
• pp.115-126
• /
• 2013

이 연구에서는 과학 탐구의 본성에 대한 명시적-반성적 탐구 학습 프로그램을 개발하고 적용하여 그 효과를 과학 탐구의 본성을 직접 가르치지 않은 암시적 탐구 수업과 비교하였다. 또한, 개발된 프로그램 및 암시적 탐구 수업에 대한 학생들의 인식을 비교하였다. 중학교 2학년 학생들을 두 집단에 배치하였다. 처치 집단에서는 과학 탐구의 본성에 대한 명시적-반성적 탐구 학습 프로그램을 실시하였고, 통제 집단에서는 과학 탐구의 본성과 관련된 내용을 제외하고 처치 집단과 동일한 탐구 활동을 사용한 수업을 실시하였다. 연구 결과, 처치 집단의 수업이 학생들의 과학 탐구에 대한 인식론적 견해를 향상시키는데 효과적이었다. 그러나 두 집단의 과학 성취도와 과학 수업에 대한 즐거움에는 통계적으로 유의미한 차이가 없었다. 처치 집단의 학생들은 과학 탐구의 본성에 대한 소집단 토론 활동을 수업의 장점으로 생각하였으며, 소집단 토론 활동이나 과학 탐구의 본성에 대한 이해, 자신의 생각을 글로 쓰고 발표하는 활동 등을 어려움으로 인식하는 것으로 나타났다. 이에 대한 교육학적 함의를 논의하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.42-51
• /
• 2006

The main purpose of this paper is to calculate the behaviors of inter-phase spacers to reduce the amplitude of galloping in conductors. In simulation, three phases and iced-single/two-bundles conductors with/without spacers are considered in viewpoint of standard cases. The implicit/explicit finite element methods are used to calculate the transient response with geometric nonlinear behavior. The ANSYS/LS-DYNA program is also applied. Calculation results can be used to predict the positions to insert the inter-phase spacers between conductors.

• 소성∙가공
• /
• 제9권6호
• /
• pp.574-581
• /
• 2000

A vertically-walled auto-body part is one of the most difficult stamping parts because of angle change, wall curl, and twisting of the blank after springback as well as fracture and wrinkle. In this study, computational simulations of the vertically-walled auto-body part are carried out focusing on angle change, wall curl, and twisting after springback. Binderwrap blank shape is used in forming analysis for precise initial contacts between punch and blank. An adaptive mesh method is used in springback analysis for precise calculation of bending moments. In springback analysis, the differences of 2 and 3 dimensional analysis are compared and the effects of blank holdig force and friction coefficient are evaluated. In order to verify the validity of simulation results, they are compared with measured ones. The predicted thickness distribution and formed shape are agreed well with those of the measurement. The Predicted springback amount is less than that of the measurement.

• Computers and Concrete
• /
• 제25권1호
• /
• pp.67-73
• /
• 2020

Traditionally used analytical approach to predict the fatigue failure of reinforced concrete (RC) structure is generally conservative and has certain limitations. The nonlinear finite element method (FEM) offers less expensive solution for fatigue analysis with sufficient accuracy. However, the conventional implicit dynamic analysis is very expensive for high level computation. Whereas, an explicit dynamic analysis approach offers a computationally operative modelling to predict true responses of a structural element under periodic loading and might be perfectly matched to accomplish long life fatigue computations. Hence, this study simulates the fatigue behaviour of RC beams with finite element (FE) assemblage presenting a simplified explicit dynamic numerical solution to show computer aided fatigue behaviour of RC beam. A commercial FEM package, ABAQUS has been chosen for this complex modelling. The concrete has been modelled as a 8-node solid element providing competent compression hardening and tension stiffening. The steel reinforcements are simulated as two-node truss elements comprising elasto-plastic stress-strain behaviour. All the possible nonlinearities are duly incorporated. Time domain analysis has been adopted through an automatic Newmark-β time incremental technique. The program consists of twelve RC beams to visualize the real behaviour during fatigue process and to obtain the reliability of the study. Both the numerical and experimental results indicate a redistribution of stresses along the time and damage accumulation of beam which severely affect the serviceability and ultimate capacity of RC beam. The output of the FEM analysis demonstrates good match with the experimental consequences which affirm the efficacy of the computer aided model. The controlled fatigue damage evolution at service fatigue load limits makes the FE model an efficient tool in predicting high cycle fatigue behaviour of RC structures.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.145-155
• /
• 2005

In this study, a finite element method program code which can be accomodate boundary conditions on the complex surfaces has been developed to simulate polymer extruder processes. The analysis method includes the fractional 4-step method for efficient computation time and compact usage of memory storage to solve the velocities and the pressure values from the Navier-Stokes equation. By using the developed program which was verified with simple Poiseuille flow mixture phenomena in single-and twin-screw extruder are analyzed. It is concluded that the proposed method resulte Poiseuille Poiseuille d in fair agreement with the exact solution of simple flow and the back flow near the entrance happens in single-screw model. It is identified that the location and values of maximum pressure in the twin screw extruder model. It is expected that the Velocity field found can be used to predict the degree of mixture in the extruder barrel.