• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.43-54
• /
• 1997

Knowledge acquisition is one of the most difficult problems in designing fuzzy systems. As application domains of fuzzy systems become larger and more complex, it is more difficult to find the relations among the system's input- outpiit variables. Moreover, it takes a lot of efforts to formulate expert's knowledge about complex systems' control actions by linguistic variables. Another difficulty is to define and adjust membership functions properly. Soin conventional fuzzy systems, the membership functions should be adjusted to improve the system performance. This is time-consuming process. In this paper, we suggest a new approach to design a fuzzy system. We design a fuzzy system using two neural networks, Kohonen neural network and backpropagation neural network, which generate fuzzy rules automatically and construct inference network. Since fuzzy inference is performed based on fuzzy relation in this approach, we don't need the membership functions of each variable. Therefore it is unnecessary to define and adjust membership functions and we can get fuzzy rules automatically. The design process of fuzzy system becomes simple. The proposed approach is applied to a simulated automatic car speed control system. We can be sure that this approach not only makes the design process of fuzzy systems simple but also produces appropriate inference results.

• The Journal of Internal Korean Medicine
• /
• v.34 no.3
• /
• pp.231-239
• /
• 2013

Objectives : This study was performed to evaluate inter-rater and intra-rater reliability of interpretation and reproducibility of a pulse analyser (MAXMAC27-Plus). Methods : 38 of 40 volunteers completed the pulse analysis consecutively. Three Korean medical doctors who had at least 2 years of clinical experience interpreted the pulse waves for 3 aspects of size, depth and shape, then inter-rater reliability and crude agreement was obtained. Reinterpretation was done 2 weeks later and intra-rater reliability and crude agreement was obtained. Intra-rater reliability and crude agreement between 1st and 2nd measurement was calculated. Cohen's weighted kappa for size, Cohen's kappa for depth and shape were used as statistical analysis. Results : Inter-rater reliability of size, depth and shape among 3 raters was 0.598, 0.604, and 0.312, respectively, showing moderate to substantial agreement. Average intra-rater reliability between 1st and 2nd interpretation of size, depth and shape was 0.806, 0.705, and 0.638, respectively, showing substantial to almost perfect agreement. However, intra-rater reliability between consecutive measurements of size, depth and shape was 0.221, 0.121, and 0.194, respectively, which showed only poor to fair agreement. Conclusions : Intra-rater and inter-rater reliability of one pulse wave showed relatively high concordance. Training by a clinical expert may effect better concordance among raters. Test-retest reliability showed poor agreement. Improvement of measurement technique and device performance will be needed.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.511-524
• /
• 2017

This study aims to evaluate the availability of ABM (Active-Based Model), FEATHERS, as a policy evaluation tool. To achieve the goal, scenario analysis on flexible working policy was conducted to measure its impact on activity-travel behavior. As a consequence, there seems no significant change in worker's daily life, other than mitigating traffic congestion due to decreasing commuting travel in the rush hour. The result of VKT (vehicle kilometers traveled) shows an opposite pattern according to given household/individual constraints. The scenario analysis on telecommuting indicates a decreasing trend in both travel frequency and distance because of the diminished number of commuting trips. As the activity space of telecommuters is shifted to a residential area, there are more short-distance trips by using non-motorized transport, which leads to decrease in VKT (using a private vehicle). Thus, the sensitivity of VKT by population groups varies due to transport mode shift (between personal and another mode) and growing non-work trips (using a private mode). This study found few things. First, it is necessary to evaluate the details of policy impact by population groups since it can be varied depending on household/individual characteristics. Second, the case study shows a promising performance of ABM as policy measurement that provides reality in policy evaluation. Third, ABM allows us to do more accurate analysis (i.e. time-series analysis by population groups) of policy assessment than those of FSM (Four-Step Model). Lastly, a further effort in data collection, literature review, and expert survey should be made to enhance the accuracy and confidence of future research.

• Journal of Korea Water Resources Association
• /
• v.49 no.8
• /
• pp.685-692
• /
• 2016

This study aimed to develop the indicator-based approach to assess water use vulnerability in watersheds and applied to the unit watershed within the Han River watershed. Vulnerability indices were comprised of three sub-components (exposure, sensitivity, adaptive capacity) with respect to water use. The indicators were made up of 16 water use indicators. Then we estimated vulnerability indices using the Technique for Order of Preference by Similarity to Ideal Solution approach (TOPSIS). We collected environmental and socio-economic data from national statistics database, and used them for simulated results by the Soil and Water Assessment Tool (SWAT) model. For estimating the weighted values for each indicator, expert surveys for subjective weight and data-based Shannon's entropy method for objective weight were utilized. With comparing the vulnerability ranks and analyzing rank correlation between two methods, we evaluated the vulnerabilities for the Han River watershed. For water use, vulnerable watersheds showed high water use and the water leakage ratio. The indices from both weighting methods showed similar spatial distribution in general. Such results suggests that the approach to consider different weighting methods would be important for reliably assessing the water use vulnerability in watersheds.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.310-318
• /
• 2012

Actual condition by items based on the level of execution of Construction Company certified by Construction Safety and Health Management Systems (KOSHA 18001) was investigated, analyzed and evaluated reflecting various opinions fincluding safety experts, top management, audit experts, and construction engineers. Currently, the maintenance is being managed through internal audit after the safety and health management system has been certified, but it is difficult to identify the degree of continuous improvement. In order to present the standards to see the level of quantified system, this study was conducted. The purpose of this study is to present the system maturity evaluation tool to be used to reduce occupational accidents through proper establishment and continuous improvement of national health and safety management system. Results of this study are summarized through identification of current condition of implementation of KOSHA 18001 system, development of maturity measurement tool and verification as follows: First, priority of implementation for activities of headquarters and on-site was determined by importance of activities such as the risk assessment, safety and health accident prevention activities, performance assessment and monitoring, resource management and support, and management review and improvement in order. In addition, the expert group presented that association with continuous improvement activities could establish the system by presenting strengths, weaknesses and improvement subjects of system.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.183-191
• /
• 2015

Studies on the environment-friendly and permanent low energy saving measure are and will continue to be an eternal challenge. However, the demand is high for the technologies that can save energy significantly in everyday life that produce tangible benefits for the users by applying saving factors and that anyone can access easily when it comes the related procedure. Government policies related to the improvement of energy effect in the existing building structure are characterized by complex procedure. Moreover, cost required and reliability issue emerge when request is made to an expert. Accordingly, this study seeks to present energy improvement plan that can be utilized simply and conveniently at any place, any time by enabling customized design according to individual taste by enabling energy change amount and grade prediction when the users select only the part that they want to replace by using a simple program.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.37-46
• /
• 2016

Patent application as achievements from R&D institutions in public sector have quantitatively increased by expanding R&D investment for enhancing competitiveness but there have been few tangible outputs from the investment. From this reason, TLO(Technology Transfer&Licensing Organization) and its operation becomes more important to implement technology transfer and commercialization and to bring success in the related business. To get work done more efficiently and to improve utilizing products of the R&D in the TLO, this research is to draw domains and activities of TLO and establish its task systems by prioritizing activities. From literature reviews and expert interviews, we generated 6 work domains and 21 task items. Applying AHP analysis, we discriminated the relative importance from task items and analyzed its priority. The finding of this research can provide implications for TLO to increase work efficiency and improve its performance.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.78-90
• /
• 2016

The contents industry is usually divided into the movie industry, music industry, drama industry and the online digital industry. In Korean contents industry, since mid-1990s CJ E&M (Entertainment and Media) has implemented and continued experimental attempts in order to expand the hallyu contents. On basis of a theoretical background, I designed a case study to investigate the mechanism how the CJ E&M's strategy influences on hallyu growth. This study categorized the strategic direction into two key factors: digital business and glocal (global + local) contents production. Those attempts have made positive effect to the expansion of hallyu contents and creation of growth in CJ E&M. CJ E&M have increased experimental movement through digital platform augmentation, digital contents enhancement, and contents creator promotion strategies. In addition, utilization of local contents expert who provide production services for joint production at overseas markets should also be organized to expand the hallyu contents and growth of CJ E&M. This study suggests that the quality of digital business and glocal contents production have a positive relationship with hallyu contents growth and corporate performance.

• Journal of KIISE:Software and Applications
• /
• v.33 no.8
• /
• pp.718-729
• /
• 2006

There has been increasing interest in automatic term recognition (ATR), which recognizes technical terms for given domain specific texts. ATR is composed of 'term extraction', which extracts candidates of technical terms and 'term selection' which decides whether terms in a term list derived from 'term extraction' are technical terms or not. 'term selection' is a process to rank a term list depending on features of technical term and to find the boundary between technical term and general term. The previous works just use statistical features of terms for 'term selection'. However, there are limitations on effectively selecting technical terms among a term list using the statistical feature. The objective of this paper is to find effective features for 'term selection' by considering various aspects of technical terms. In order to solve the ranking problem, we derive various features of technical terms and combine the features using machine-learning algorithms. For solving the boundary finding problem, we define it as a binary classification problem which classifies a term in a term list into technical term and general term. Experiments show that our method records 78-86% precision and 87%-90% recall in boundary finding, and 89%-92% 11-point precision in ranking. Moreover, our method shows higher performance than the previous work's about 26% in maximum.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.229-239
• /
• 2016

The aim of this paper is to extend the TOPSIS(Technique for Order Performance by Similarity to Ideal Solution) to the fuzzy environment for solving the new professor selection problem in a university. In order to achieve the goal, the rating of each candidate and the weight of each criterion are described by linguistic terms which can be expressed in trapezoidal fuzzy numbers. In this paper, a vertex method is proposed to calculate the distance between two trapezoidal fuzzy numbers. According to the concept of the TOPSIS, a closeness coefficient is defined to determine the ranking order of all candidates. This research derived; 1) 4 evaluation criteria(research results, education and research competency, personality, major suitability) for new professor selection, 2) the 5 step procedure of the proposed fuzzy TOPSIS method for the group decision, 3) priorities of 4 candidates in the new professor selection case. The results of this paper will be useful to practical expert who is interested in analyzing fuzzy data and its multi-criteria decision-making tool for personal selection problem in personal management. Finally, the theoretical and practical implications of the findings were discussed and the directions for future research were suggested.