• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.65-77
• /
• 2020

In order to industrialize of Dendranthema indicum (L.) DesMoul., which is a lot of commercially available and is synonymous with chrysanthemum tea, in the autumn of 2018, Dendranthema indicum (L.) DesMoul. seeds were collected from its own native region, and the seeds were germinated after refrigerated storage. Young seedlings were subjected to experiments in February, March, and April in the open field to examine the effects on the harvesting of leaves by distance and the growth of leaves and stems. The results of analyzing the components by collecting the leaves+stem after collecting the flower of Dendranthema indicum (L.) DesMoul. are as follows. 1. When D. indicum (L.) DesMoul. seedlings were planted according to the transplanting date, the number of flowers was 17.1 in the transplanting date in April. The diameter of the flower was 2.9cm, 16ea, 6.5~6.6g in the fresh weight, and the dry weight of the case was 1.1~1.2g. The leaves were 46~47ea in March and April in the planted area, 5.2~5.3cm in leaf length and 3.5~3.6cm in leaf width. 2. When planted D. indicum (L.) DesMoul. seedlings according to transplanting distance, the number of flowers was 16.2 when planted at 20×20cm intervals and, 16.8~17.1 at 30×30~50×50cm intervals. The diameter of the flower was 2.7~2.8cm, the number of petals was 8, the length of the petal was 0.8 cm, and fresh weight was 6.5~6.6g per flower. Leaves had the largest number of 47 of 30×30cm and 40×40cm, and leaf length appeared at the longest 6.2cm in the 50×50cm treatment area, but 5.2cm in the other treatment areas. 3. The extraction yield of D. indicum (L.) DesMoul. leaves+stems was 7.93%, and the extraction solvent colors were light green at 50, 60% and green at 70, 80, 90, 100%. The extraction yield of D. indicum (L.) DesMoul. flowers was 7.58%, the color of the extraction solvent was light yellow at 50, 60 and 70%, yellow at 80 and 90%, and dark yellow at 100%. 4. We confirmed 11 kinds of ingredients such as in D. indicum (L.) DesMoul. flowers are gallic acid, 4-hydroxy benzoic acid, methyl gallate, 4-hydroxy-3-methoxy benzoic, caffeic acid, salicylic acid, p-coumaric acid, sinapic acid, naringin, 4-melthoxyben, flavone. The content was 29.200-36.900ppm. 5. The components contained in the D. indicum (L.) DesMoul. leaf+stem, salicylic acid appeared at 6,129.526ppm, and the next 4-methoxyben was 1,966.714ppm. It was methyl gallate 8.197ppm, 4-hydroxy-3-methoxy benzoic 6.994ppm, caffeic acid 5.566ppm, flavone 4.522ppm, p-coumaric acid 3.787ppm, gallic acid 1.893ppm that appeared in the content below 10ppm.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.123-133
• /
• 2020

Four LEDs (blue, green, red, and white light) were tested to identify the most attractive wave length to utilize as the forecasting tools for the B. tabaci in glass houses. Attractiveness was evaluated by the total number of the B. tabaci attached to a yellow sticky trap. In the condition of no host plant supplement, the attraction efficacy was ordered from high to low as blue light (107.3±2.5), white light (83.0±12.1), red light (58±21.8), and green light (39.7±8.1). In the supplement of the host plant, the attraction was observed in the order of blue light (52±17.4), red light (38.7±5.8), green light (12.7±1.5), and white light (11.7±5.0). In both experimental conditions, blue light showed the highest attraction. In terms of the host plant effect to LED attraction, it varied following as white light (85.9%), green light (68.1%), blue light (51.6%), and red light (33.3%). This result suggests that red light is the least affected by the host plant. In the evaluation of the relative control efficacy, it was determined following as red light (66.7%), blue light (48.5%), green light (31.9%) and white light (14.1%) (F_3,8 = 14.7, P = 0.001). Taken together, blue light had a very high initial attraction, and red light was revealed low attraction effect by the supplement of the host plant. In field demonstration experiments, a high attractive efficacy was not observed due to low-temperature conditions, but similar higher attractive efficacy was observed in blue and red lights compared to the control. The commercialization of LEDs using red and blue in the future is expected to provide important information regarding B. tabaci population density forecast in glass house.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.74-80
• /
• 2022

The vegetation of historical sites has been a form of vegetation that has remained since some years ago, but in modern times, vegetation and terrain have been deformed or damaged due to urban development, which was followed by an industrialization. As a solution to this, it is necessary to establish a plan for restoration and management by referring to the vegetation and landscape remaining in the historic site as indicators. This study was conducted to provide basic data for vegetation and landscape management of Baekje Historic Sites in Seoul by comparing and analyzing location characteristics, existing vegetation, and remaining vegetation of past substitutional vegetation for Pungnaptoseong and Mongchontoseong, Baekje Historic Sites in Seoul. As a result of the study, Pungnaptoseong and Mongchontoseong are located near the main stream of the Han River, Pungnaptoseong is located on a flat land consisting of natural embankments and floodplains, and Mongchontoseong is located on a hilly area. In the case of existing vegetation, it has been confirmed that Pungnaptoseong mainly has ornamental trees planting sites, while Mongchontoseong has a distribution of residual species from the past that grow in villages and hilly lowlands. The Substitutional vegetation of Pungnaptoseong and Mongchontoseong was synthesized based on the location characteristics and actual vegetation, it is estimated that the hilly areas may have been divided into "Quercus aliena Blume.", "Quercus mongolica Fisch. ex Ledeb." and so on, "Pinus densiflora Siebold & Zucc." on dry land,"Salix koreensis Andersson.", "Juglans mandshurica Maxim.", "Alnus japonica (Thunb.) Steud." in rivers and tributaries, "Quercus acutissima Carruth." in the main part of the forest, "Pinus densiflora Siebold & Zucc.", "Salix koreensis Andersson.", "Zelkova serrata (Thunb.) Makino." as a divine tree in the beginning of the village. Since the 1960s, all substitutional vegetation in the past has disappeared due to the introduction of foreign species and the creation of urban areas in Pungnaptoseong and Mongchontoseong, and the landscape has also been damaged. Fortunately, the substitutional vegetation was estimated in consideration of the species of residual trees distributed along the walls, climate, location characteristics, and times, but this study was conducted based on literature and existing vegetation surveys. Therefore, it is necessary to supplement the past target vegetation in Baekje historical sites in Seoul through quantitative experiments such as plant relic analysis in the future.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.761-774
• /
• 2022

Accurate hydrologic prediction is essential to analyze the effects of drought, flood, and climate change on flow rates, water quality, and ecosystems. Disentangling the uncertainty of the hydrological model is one of the important issues in hydrology and water resources research. Hydrologic data assimilation (DA), a technique that updates the status or parameters of a hydrological model to produce the most likely estimates of the initial conditions of the model, is one of the ways to minimize uncertainty in hydrological simulations and improve predictive accuracy. In this study, the two ensemble-based sequential DA techniques, ensemble Kalman filter, and particle filter are comparatively analyzed for the daily discharge simulation at the Yongdam catchment using airGRdatassim. The results showed that the values of Kling-Gupta efficiency (KGE) were improved from 0.799 in the open loop simulation to 0.826 in the ensemble Kalman filter and to 0.933 in the particle filter. In addition, we analyzed the effects of hyper-parameters related to the data assimilation methods such as precipitation and potential evaporation forcing error parameters and selection of perturbed and updated states. For the case of forcing error conditions, the particle filter was superior to the ensemble in terms of the KGE index. The size of the optimal forcing noise was relatively smaller in the particle filter compared to the ensemble Kalman filter. In addition, with more state variables included in the updating step, performance of data assimilation improved, implicating that adequate selection of updating states can be considered as a hyper-parameter. The simulation experiments in this study implied that DA hyper-parameters needed to be carefully optimized to exploit the potential of DA methods.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.2
• /
• pp.127-134
• /
• 2020

Purpose: The aims of this study were (1) to investigate the relationship between the characteristics of allogenic bone block and the compressive strength of an allogenic bone block measured by biomechanical experiments, and (2) to compare the maximum pressure load of allogenic bone block with the gap pressure measured at the high tibial opening osteotomy. Materials and Methods: Ten patients who provided informed consent for gap pressure measurements during opening wedge high tibial osteotomy (OWHTO) were included. The gap pressures were measured at 1 mm intervals while opening the osteotomy site from 8 mm to 14 mm. Seventeen U-shaped allogenous wedge bone blocks were made from the femur, tibia, and humerus. The height, width, cross-sectional area, and cortex thickness of the bone blocks were measured, along with the maximum compressive load just before breakage. The relationship between these characteristics and the maximum pressure load of the bone blocks was evaluated. The gap pressures measured in OWHTO were compared with the maximum pressure loads of the allogenous wedge bone blocks to evaluate the possibility of inserting allogenous wedge bone blocks into the osteotomy site without a distractor in OWHTO. Results: The OWHTO gap pressure increased with increasing osteotomy site opening. The mean gap pressure, which occurred at a 14-mm opening, was 282±93 N; the maximum pressure was 427 N. The maximum pressure load of the allografts was 13,379±6,469 N (minimum, 5,868; maximum, 29,130 N) and was correlated significantly with the cortical bone thickness (correlation coefficient=0.693, p=0.002) and cross-sectional area (correlation coefficient=0.826, p<0.001). Depending on the sterilization method, the maximum pressure loads for the bone blocks were 13,406±5,928 N for freeze-dried and 13,348±7,449 N for fresh frozen. The maximum compressive load of the allogenous wedge bone blocks was 13.7-times greater than that in OWHTO opened to 14 mm (5,868 N vs. 427 N). Conclusion: The compressive strength of allogenous wedge bone blocks was sufficiently greater than the gap pressure in OWHTO. Therefore, allogenous wedge bone blocks can be inserted safely into the osteotomy site without a distractor.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.1
• /
• pp.38-41
• /
• 2022

Purpose Testosterone is a steroid hormone synthesized by the Leydig cells of the testes in men, and by the adrenal cortex and ovaries in women. Testosterone production is regulated by luteinzing hormone secreted by the anterior pituitary gland. In this experiment, the effectiveness of testosterone radioimmunoassay (RIA) kits produced by three companies was evaluated and compared in case the production of testosterone kits was stopped or supply problems occurred. Materials and Methods In October 2021, samples were collected from the patients (n=49) who requested the testosterone RIA test. The experiment was conducted by dividing the patient's sample into low concentration (1.0 ng/mL or less), medium concentration (2.0-4.0 ng/mL) and high concentration (6.0 ng/mL or more). The Testosterone RIA test compared and evaluated the validity of Company A kits used in this hospital and those of Company B and C used in other hospitals. The precision, sensitivity, recovery, linearity and correlation were evaluated for each kit. The testosterone RIA test was carried out in accordance with the insert kit manual for each manufacturer. Results As a result of measuring the precision of the intra assay, the Coefficient of Variation (CV) value of the company A kit was high at 11.4% only in the low concentration sample, and in the case of the company B and C kits, the CV value was less than 10% at low, medium, and high concentrations. In the inter-assay precision measurement, the CV value was less than 15% in both A and C kits, but in the case of the B kit, the CV value exceeded 15% at low and medium concentrations. Sensitivity was 0.13 ng/mL for company A, 0.01 ng/mL for company B, and 0.01 ng/mL for company C, and the linearity of all three kits showed excellent linearity. In the case of recovery rate, all of the A, B, and C company kits showed results that were out of 90-110%. In the case of correlation test, when compared with the company A kit currently use in here, the correlation coefficient (R²) value for the company B kit was 0.9508, and for the company C kit was 0.9352 Conclusion As a result, there was a slight difference in precision at the low concentration sample. The correlation test showed an excellent correlation coefficient. However, it was difficult to secure samples of various concentrations because there were not many tests of testosterone requested at this hospital. So, additional experiments should be carried out by acquiring samples of various concentrations on each laboratory later.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.1
• /
• pp.42-46
• /
• 2022

Purpose In the meantime, there have been not many samples that require dilution, and it has been difficult for the examiner to set an appropriate dilution multiple for RIA test item and report the results. Accordingly, it was judged that it was necessary to set the maximum dilution multiple for each test and to verify the upper limit of the clinical reportable range. Therefore, in this study, the maximum dilution multiple for each RIA test was set and the upper limit of the clinical reportable range was verified accordingly Materials and Methods Among all RIA tests conducted at Asan Medical Center, the study treated on 30 types of tests which also conduct the dilution test. Data from March to July 2021 were collected and analyzed. The study was conducted on samples subjected to serial dilutions such as X2, X4 or X10, X10², X10³, X10⁴, X10⁵. Results Among a total of 30 test types, 18 test types have more than 5 N values in the tolerance range of 80~120%. As a result of the verification of maximum dilution multiples, the test set to 10⁴ is 𝛼-fetoprotein and thyroglobulin, and the test set to 10³ is CA-125, CEA, and 𝛽-hCG, and the test set to 10² is Free PSA, PSA, CA15-3, SCC, Ferritin, PTH, Cortisol, and Calcitonin. Tests set to 10 include three categories: 𝛽2-Microglobulin, C-peptide, and Testosterone. Conclusion It is expected that it will contribute to improving the quality of nuclear medicine blood tests as the results of dilution experiments can be reported quickly and accurately through the verification of the clinical reportable range.

• Journal of Life Science
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2022

Natural products have gained increasing attention due to their advantage of long-term safety and low toxicity for a very long time. Torreya nucifera is widespread in southern Korea and Jeju Island and its seeds are commonly used as edible food. Oriental ingredients have often been reported for their insecticidal, antioxidant and antibacterial properties, but there have not yet been any studies on their antidiabetic effect. In this study, we investigated several biological activities of T. nucifera pericarp (TNP) and seeds (TNS) extracts and proceeded to characterize the antidiabetic compounds of TNS. The initial results suggested that TNS extract at 15 and 10 ㎍/ml concentration has inhibitory effects on α-glucosidase and protein tyrosine phosphatase 1B, that is 14.5 and 4.35 times higher than TNP, respectively. Thus, the stronger antidiabetic TNS was selected for the subsequent experiments to characterize its active compounds. Ultrafiltration was used to determine the apparent molecular weight of the active compounds, showing 300 kDa or more. Finally the mixture was then partially purified using Diaion HP-20 column chromatography by eluting with 50~100% methanol. Therefore we concluded that the active compounds of TNS have potential as therapeutic agents in functional food or supplemental treatment to improve diabetic diseases.

• Journal of Life Science
• /
• v.31 no.11
• /
• pp.1028-1036
• /
• 2021

Firefly luciferase (FLuc) can function as an efficient marker in the gene and viral therapies. Nonetheless, its clinical translation has been unaccomplished with the concerns on its exogenous nature and the similarity with human fatty acyl-CoA synthetase. In this study, we aimed to show safety of FLuc by conducting a set of preclinical experiments and a human use. Initially, FLuc permeability across the plasma membrane was investigated by delivering the FLuc-carrying viral vector, OTS-412, or the FLuc recombinant protein. After in vitro infection of OTS-412 into different cancer cell lines, FLuc activity was detected only in the cell lysates, but not in culture media. In addition, recombinant FLuc protein further showed the impermeability against the plasma membrane. Similar result was also observed in the in vivo experiment. After being injected into the VX2 tumor-bearing rabbit, the FLuc exclusively resided within the tumor tissue without being detected in the blood plasma or other organs. Human cancer cell lines originated from various organs were lysed and treated to the FLuc, and none of the human substrates was reactive against the FLuc. As a final step, FLuc recombinant protein was intravenously injected into a human. The luciferase was degraded with the half-life of 20 to 30 minutes in blood, and was untraceable from 1.5 hr after the injection. In addition, the blood plasma was nonresponsive against the fatty acids. Hematological analysis was also comparable between the pre- and post-injection. Altogether, our study collectively demonstrates the safety of the firefly luciferase.