• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.953-957
• /
• 1994

A performance prediction method is presented in this paper for design of a rotating machinery having power split/circulated transmisson with slip elements and planetary gears. And internal power flow patterns of such systems are theoretically analyzed by using mathematical modeling. To estimate usefulness of the designed machinary, geometrical approach has been adopted through the performance locus diagram which represents overall characteristics of the system. This gives us complect prediction of the qualitative performane and effects of design factors such as system layout, types and gear ratios of planetary gears and disign parameters of slip elements. The results for one of them are compared with experimental ones using dynamometer for verification.

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1220-1228
• /
• 2005

Fault detection and diagnostic (FDD) systems have the potential to reduce equipment downtime, service costs, and utility costs. In this study, model based algorithm and fuzzy algorithm were used to detect and diagnose various fault at System multi-air conditioner. various fault include the Refrigerant Low charging, Fouling of Indoor Heat Exchanger, Fouling of Outdoor Heat Exchanger A experimental verification was conducted in the 6HP System multi-air conditioner on an 8-floor building. Test results showed diagnosis result about 78 $\~$ 90$\%$ for given faults. This Study lays the foundation fur future work on develope the real-time fault detection and diagnosis system for the System multi-air conditioner.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.37-44
• /
• 1996

포수상태(包水狀態)의 루부라참나무(Quercus rubra) 시험편을 3가지 등온조건(等溫條件)에서 건조한 결과를 비정상상태(非正常狀態)의 확산(擴散)모델로 추정한 결과와 비교하였다. 표면이 충분히 젖은 상태인 건조초기에는 불안정(不安定)한 확산현상(擴散現象)이 관찰되었으나, 함수율(含水率)별 건조속도의 변이를 Fick's의 확산법칙과 비교할 때 유사한 형태를 보였다. 실험에서 얻은 건조조건별 건조곡선은 확산모델의 수치해석(數値解析) 결과와 거의 일치하였으며, 같은 평위함수율(平衛含水率) 조건에서 건조온도의 증가는 목재표면 보다 내부의 함수율 변화에 더 크게 영향하여 결과적으로 낮은 온도에서의 건조조건이 목재 내의 수분경사(水分傾斜)를 급하게 하는 것으로 밝혀졌다. 본 연구를 통해 목재 건조 중의 내부에 발생하는 수분경사를 추정하는데 비정상상태의 확산모델이 모든 함수율 범위에 걸쳐 유용하게 사용될 수 있음이 밝혀졌다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.460-465
• /
• 2002

The nonlinear vibration of the CRT shadow mask is analyzed in consideration of the V-shaped tension distribution and the effect of wire impact damping. The reduced order FEM model of the shadow mask is obtained from dynamic condensation for the mass and stiffness matrices. Damping wire is modeled using the lumped parameter method to effectively describe its contact interactions with the shadow mask. The nonlinear contact-impact model is composed of spring and damper elements, of which parameters are determined from the Hertzian contact theory and the restitution coefficient, respectively. The analysis model of the shadow mask with damping wires is experimentally verified through impact tests of shadow masks performed in a vacuum chamber. Using the validated analysis model of the shadow mask with damping wires, the‘design of experiments’technique is applied to search fur the optimal damping wire configuration so that the vibration attenuation of the shadow mask is maximized.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.365-370
• /
• 2003

The problem of brake judder is typically caused by quality defects in manufacturing. This quality problem, however, can't be controlled deterministically and requires analyses and designs considering uncertainties. This paper presents a method for dynamic analysis of a brake judder considering uncertainties. Firstly, quality defects, which come from the uncertainties, are determined by examination of symptoms of the brake judder quality problem. Effective quality defects are selected by investigation of process capability and comparison of sensitivity of each quality defects and noise levels of the effective quality defects are determined. Secondly, flexible multibody dynamic analysis and finite element analysis according to the proposed method are carried out. Finally, The analysis results are compared with the test results with noise levels of the effective quality defects.

• 대한기계학회논문집
• /
• 제10권5호
• /
• pp.601-610
• /
• 1986

본 연구에서는 음향학적 고찰로써 최근 디지를 처리기술의 발달에 따른 근접 한 2점의 음압으로 부터 테니스 라켓의 공기입자속도를 근사적으로 구하기 위하여 두 개의 마이크로폰을 이용하여 계산된 음향인텐시티는 구물의 오무드 해석법에 의해 구 해진 테니스 라켓의 동적 특성과 비교 검토함으로써 진동과 음의 발생기구를 구명하고 측정계의 비접촉에 의한 테니스 라켓의 동적 거동을 규명하였다.

• 오토저널
• /
• 제6권1호
• /
• pp.56-62
• /
• 1984

Various automotive and machine parts are having the shape of circular ring and the study and the verification of its dynamic characteristics can be the important basis of quality control and improvement of performance of inner and outer race of ball and roller radial bearing, ring gear, seal, etc. In this study, three separate sets of governing equations on the flexural vibration of circular ring were formulated each considering the effects of viscous damping, rotatory inertia and shear deformation, and three frequency formulas were derived. Numerical values of frequencies of circular and rectangular cross section ring were tabulated and compared with experimental value. Some important parameters were found in the ring vibration characteristics.

• Journal of Ship and Ocean Technology
• /
• 제8권1호
• /
• pp.10-30
• /
• 2004

High-fidelity RANS simulations are presented for a ducted marine propulsor, including verification ＆ validation (V＆V) using available experimental fluid dynamics (EFD) data. CFDSHIP-IOWA is used with $\textsc{k}-\omega$ turbulence model and extensions for relative rotating coordinate system and Chimera overset grids. The mesh interpolation code PEGASUS is used for the exchange of the flow information between the overset grids. Intervals V＆V for thrust, torque, and profile averaged radial velocity just downstream of rotor tip are reasonable in comparison with previous results. Flow pattern displays interaction and merging of tip-leakage and trailing edge vortices. In interaction region, multiple peaks and vorticity are smaller, whereas in merging region, better agreement with EFD. Tip-leakage vortex core position, size, circulation, and cavitation patterns for $\sigma=5$ also show a good agreement with EFD, although vortex core size is larger and circulation in interaction region is smaller.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.122-128
• /
• 1999

Bolted joint assembly for nuclear power plants consists of various components : cover plate, retainer plate, manway flange, gasket and stud bolts/nuts. To guarantee the soundness of the joint, it is important to prevent leakage through the gasket and reduce the stress concentration factor at the thread root. In this paper, Submodeling technique for the finite element method is proposed to accurately compute three dimensional contact stresses which govern the sealing performance and the maximum contact stresses at the threads root. For verification of global solutions used as boundary conditions of submodel solution, the stresses on the cover plate and the manway flange are measured by strain gages when internal pressure is applied to the bolted joint assembly. The numerical results are compared with the experimental results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.51-56
• /
• 2006

This paper proposes a control algorithm, which is verified experimentally, for aspherical surface grinding and polishing. The algorithm provides simultaneous control of the position and interpolation of an aspheric curve. The nonlinear formula for the tool position was derived from the aspheric equation and the shape of the tool. The function was partitioned at specific intervals and the control parameters were calculated at each control section. The position, acceleration, and velocity at each interval were updated during the process. A position error feedback was introduced using a rotary encoder. The feedback algorithm corrected the position error by increasing or decreasing the feed speed. In the experimental verification, a two-axis machine was controlled to track an aspherical surface using the proposed algorithm. The effects of the control and process parameters were monitored. The results demonstrated that the maximum tracking error with tuned parameters was at the submicron level for concave and convex surfaces.