• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1246-1251
• /
• 2000

High level random vibration environments induced while launching of spacecraft can damage sensitive electronic equipment very rapidly, unless the equipment is properly packaged. Thus very careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of electronic equipment of spacecraft. This paper describes the development process of Solar Array Regulator for KOMPAT-2, which is designed and tested by Korean engineers. Both analytical and experimental techniques are introduced in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.87-94
• /
• 2000

In this paper we discuss the control scheme on cooperative control of two flexible manipulators working in 3D space. We propose a control scheme which consists of hybrid position/force control and vibration suppression control. Hybrid position/force control is extended from the scheme for two cooperating rigid manipulators to that for flexible ones. in addition to the control vibration suppression control based upon a lumped-mass-spring model of the flexible manipulators is applied. To illustrate the validity of the proposed control scheme we show experimental results. in the experiment a rigid object is handled by two cooperating flexible manipulators in 3D space.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.155-158
• /
• 2000

Flow defect of a piston-pin for automobile parts is investigated in this study. In cold forging of piston-pin Lapping defect a kind of flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The finite element simulations are applied to analyze the flow defect. This study proposed processes for preventing flow defect by removing dead metal zone. Then the results are compared with the experiments for verification. These FE simulation results are in good agreement with the experimental ones.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.88-97
• /
• 1999

In this study, a systematic approach for roll pass design in bar rolling was studied. To minimize the trial and errors in the process design, a roll CAD system and a FE analysis system were combined. Based on the system, a methodology for roll pass design by FEM was studied. At first, designed process was compared with the FE analysis results and process redesign based on the FEM results was performed to obtain the specified final geometry. Then, empirical formula for roll speed set-up was compared with the FE analysis results. Further study on various simulations for bar rolling will help in making up for the inaccuracy in the currently used empirical roll speed rules. In addition, verification of the accuracy of the FE analysis system must be performed using experimental data in the industry.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.596-600
• /
• 2009

Finite element simulation is an alternative method to practically find the forming limit diagram(FLD). In this paper, the novel fracture criterion is utilized to predict the FLD in conjunction with finite element analysis for sheet forming. The principal scheme of the fracture criterion in this paper is that growth of the micro voids leads up to fracture in the viewpoint of micro-mechanics. The numerical FLD is verified by results of the out-of plane stretching test using hemispherical punch. The verification is also conducted about two types of material. These results are in good accord with the experimental results. Especially, the proposed scheme is appropriate to predict FLDs for a restricted material with low ductility after the instability point or ultimate tensile strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.896-902
• /
• 2000

Crack detection technique for concrete structures has been developed in this study,. The technique utilizes OTDR(Optical Time Domain Reflectometer) method that is widely used in the field of optical engineering. At present, some techniques, such as the naked eye inspection, inspection by crack gauge, ultra sonic detection and os on, are used for crack detection. However, these are not economical and are often time-consuming works. This method employs a common optical fiber as a means of crack detection. Th optical fiber is fully attached to concrete surface, and a crack on concrete could be detected to synchronize with the crack on optical fiber. The experimental verification was performed for concrete beams and the intial crack on the beam was detected under cracking force.

• International Journal of Advanced Culture Technology
• /
• v.5 no.3
• /
• pp.40-45
• /
• 2017

This data mining technique was used to extract useful information from percutaneous coronary intervention data obtained from the US public data homepage. The experiment was performed by extracting data on the area, frequency of operation, and the number of deaths. It led us to finding of meaningful correlations, patterns, and trends using various algorithms, pattern techniques, and statistical techniques. In this paper, information is obtained through efficient decision tree and cluster analysis in predicting the incidence of percutaneous coronary intervention and mortality. In the cluster analysis, EM algorithm was used to evaluate the suitability of the algorithm for each situation based on performance tests and verification of results. In the cluster analysis, the experimental data were classified using the EM algorithm, and we evaluated which models are more effective in comparing functions. Using data mining technique, it was identified which areas had effective treatment techniques and which areas were vulnerable, and we can predict the frequency and mortality of percutaneous coronary intervention for heart disease.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.44-47
• /
• 2005

This paper presents the efficient plan for the EMI improvement from of TFT-LCD Module. It investigates the frequency characteristics of Power/Ground Plane of TFT-LCD drive circuit PCB concretely. After the frequency characteristics is reviewed, EMI improvement is tried to insert to RC termination between Power/Ground Plane and to shift resonance frequency. It is confirmed by a simulation result and RC Termination which is inserted the point where the resonance characteristics change is necessary. It applied in 19 "SXGA TFT-LCD drive circuits and the EMI improvement verification is described.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.752-753
• /
• 2008

The analytical expressions for magnetic field distributions considering slotting effects, cogging torque and back-emf considering skew effects are established. On the basis of magnetic field solutions, electrical parameters such as back-emf constant and winding inductance are obtained. The predicted results are validated extensively by non-linear finite element (FE) analyses. In particular, test results such as back-emf, cogging torque, inductance and resistance measurements are given to confirm the analyses. Finally, generating performances are investigated by applying estimated parameters to equivalent circuit (EC) of the permanent magnet generator (PMG) and validated extensively by FE calculations and measurements.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.898-899
• /
• 2015

This paper present a transient experiment to verify the performance of limited angle torque motor(LATM) designed using electromagnetic transient analysis. LATM requires access to the transitional state to the torque performance evaluation. Because LATM moves the rotor using a magnetic torque generated by the interaction of the permanent magnet and the armature winding. A separate control is not applied, it is switched on at the same time under the conditions that the current applied to the armature winding. It was compared to the transient analysis of the experimental data of LATM for the verification of approach method in the transitional state.