• 한국지반공학회논문집
• /
• 제32권11호
• /
• pp.97-108
• /
• 2016

달 탐사시 탐사 로버는 반드시 필요하며, 특히 월면토와 로버 휠의 상호작용에 의한 로버 휠의 성능은 로버의 최적 형상을 결정하는데 있어서 매우 중요하다. 본 연구에서는 한국형 인공 월면토(KLS-1)에서 달 탐사 로버 휠의 거동 성능을 평가하기 위하여 단일 휠 성능평가 실험장비를 개발하였고, 이를 이용하여 그라우져 유무에 따른 휠 성능 평가 실험을 수행하였다. 휠 성능은 슬립율에 따른 견인력, 토크, 침하 등으로 평가하였으며, 실험 결과 개발된 단일 휠 성능평가 실험장비는 휠 성능을 적절히 평가하는 것으로 나타났으며, 한국형 인공 월면토에서 그라우져가 있는 휠이 그라우져가 없는 휠에 비해 높은 견인 성능을 보여주었다. 향후 본 실험은 한국형 로버의 최적 휠 결정을 위해 사용될 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1037-1051
• /
• 2024

This paper presents the construction results and design of the UNIST Reactor Innovation platform for small modular reactors as a versatile testbed for exploring innovative technologies. The platform uses simulant fluids to simulate the thermal-hydraulic behavior of a reference small modular reactor design, allowing for cost-effective design modifications. Scaling analysis results for single and two-phase natural circulation flows are outlined based on the three-level scaling methodology. The platform's capability to simulate natural circulation behavior was validated through performance calculations using the 1-D system thermal-hydraulic code-based calculation. The strategies for evaluating cutting-edge technologies, such as the integration of a solid oxide electrolysis cell for hydrogen production into a small modular reactor, are presented. To overcome experimental limitations, the hardware-in-the-loop technique is proposed as an alternative, enabling real-time simulation of physical phenomena that cannot be implemented within the experimental facility's hardware. Overall, the proposed versatile innovation platform is expected to provide valuable insights for advancing research in the field of small modular reactors and nuclear-based hydrogen production.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1334-1337
• /
• 1997

A spacecraft attitude control ground hardware simulator development is discussed in the paper. The simulator is called KT/KARI HILSSAT(Hardware-In-the Loop Simulator Single Axis Testbed), and the main structure consists of a single axis bearing and a satellite main body model on the bearing. The single axis tabel as ans experimental hardware simulator that evaluates performance and applicability of a satellite before evolving and/or confirming a mew or and old control logic used in the KOREASAT is developed. Attitude control of spaceraft by using reaction wheel is performed.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.1-8
• /
• 2020

This paper proposes a method for measuring friction forces and creating a friction model for a rotary motion control system as well as an autonomous vehicle testbed. The friction forces versus the velocity were measured, and the viscous friction, Coulomb friction, and stiction were identified. With a nominal PID (proportional-integral-derivative) controller, we observed the adverse effects due to friction, such as excessive steady-state errors, oscillations, and limit-cycles. By adding an adequate friction model as part of the augmented nonlinear dynamics of a plant, we were able to conduct a simulation study of a motion control system that well matched experimental results. We have observed that the implementation of a model-based friction compensator improves the overall performance of both motion control systems, i.e., the rotary motion control system and the Altino testbed for autonomous vehicle development. By utilizing a better simulation tool with an embedded friction model, we expect that the overall development time and cost can be reduced.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.43-50
• /
• 2020

In this paper a low power Spreading Code Authentication (SCA) sequence with a BPSK(1) modulation at a frequency offset of +7.161 MHz is tested for authentication purposes, the Galileo E1OS is used as base signal. The tested signals comprise a Galileo constellation with 5 satellites including the Galileo OS Navigation Message Authentication (OSNMA) and a low power offset BPSK (OBPSK(7,1)) as SCA component. The signals are generated with the software based MuSNAT-Signal-Generator. The generated signals were transmitted Over-The-Air (OTA) using a Software-Defined-Radio (SDR) as pseudolite. With a real-environment-testbed the performance of the SCA in real channel conditions (fading and multipath) was tested. A new SCA evaluation scheme is proposed and was implemented. Under real channel conditions we derive experimental threshold values for the new SCA evaluation scheme which allow a robust authentication. A Security Code Estimation and Replay (SCER) spoofing attack was mimicked on the real-environment-testbed and analyzed with the SCA evaluation scheme. It was shown that the usage of an OBPSK is feasible as an authentication method and can be used in combination with the OSNMA to improve the authentication robustness against Security SCER attacks.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.208-212
• /
• 2003

An airborne radar is an essential aviation electronic system of the helicopter to perform various missions in all-weather environments. This paper presents the conceptual design results of the multi-mode pulsed Doppler radar system testbed model for helicopter. Due to the inherent flight nature of the hovering vehicle which is flying in low-altitude and low speed, as well as rapid maneuvering, the moving clutters from the platform should be suppressed by using a special MTD (Moving Target Detector) processing. For the multi-mode radar system model design, the flight parameters of the moving helicopter platform were assumed: altitude of 3 Km, average cruising velocity of 150knots. The multi-mode operation capability was applied such as short-range, medium-range, and long-range depending on the mission of the vehicle. The nominal detection ranges is 30 Km for the testbed experimental model, but can be expanded up to 75 Km for the long range weather mode. The detection probability of each mode is also compared in terms of the signal-to noise ratio of each mode, and the designed radar system specifications ate provided as a design results.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.234-237
• /
• 2014

This paper provides insights into the sFlow monitoring system of OF@KREONET. OF@KREONET is software defined network (SDN) testbed adapted by KREONET (Korea Research Environment Open NETwork). OF@KREONET uses SDN-based network virtualization to slice the network among multiple concurrent experimenter. Flow Monitoring of OF@KREONET using sFlow. sFlow and OpenFlow can be used to provide an integrated flow monitoring system where OpenFlow controller can be used to define flows to be monitored by sFlow. OF@KREONET flow monitoring system supports monitoring of per slice FlowSpace. An Experimental can monitor his/her own FlowSpace while network administrator can monitor all spaces.

• 한국안전학회지
• /
• 제38권2호
• /
• pp.8-14
• /
• 2023

In various industrial sites, piping systems play an essential role in stable fluid supply and pressure maintenance. However, these systems are constantly exposed to risks of earthquakes, explosions, fires, and leaks, which can result in casualties or serious economic losses. With rapid advancements in the industry, different-sized piping systems have been launched; however, there are not enough maintenance personnel for troubleshooting and responding to situations where damages occur to piping systems. This increases the need for introducing autonomous damage management systems. In this study, a lab-based piping system was designed and manufactured by referring to the piping system of a naval ship to analyze the effectiveness of autonomous damage management systems. By using this testbed, a representative algorithm, the hydraulic resistance control algorithm, was realized and examinedIn addition, the difference between the averaged pressure and normalized pressure was introduced to improve the performance of the existing algorithm, which faces some limitations with regard to sensor noise and back pressure from the rupture-simulated pipeline part.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.3996-4004
• /
• 2022

The data collected by the In-Situ Decommissioning (ISD) sensors are time-specific, age-specific, and developmental stage-specific. Research has been done on the stream data collected by ISD testbed in the recent few years to seek both frequent episodes and abnormal frequent episodes. Frequent episodes in the data stream have confirmed the daily cycle of the sensor responses and established sequences of different types of sensors, which was verified by the experimental setup of the ISD Sensor Network Test Bed. However, the discovery of abnormal frequent episodes remained a challenge because these abnormal frequent episodes are very small signals and may be buried in the background noise of voltage and current changes. In this work, we proposed Advanced Data Analytics (ADA) methods that are applied to the baseline data to identify frequent episodes and extended our approach by adding more features extracted from the baseline data to discover abnormal frequent episodes, which may lead to the early indicators of ISD system failures. In the study, we have evaluated our approach using the baseline data, and the performance evaluation results show that our approach is able to discover frequent episodes as well as abnormal frequent episodes conveniently.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1708-1713
• /
• 1997

In teleoperation of a manipulator, kinesthetic feedback can take an essential role in the sense that it provides an operator with more realistic information. In this paper, in order to implement the concept of kinesthetic feedback, force mapping algorithms based on screw theory have been presented. In the development of such algorithms, the virtual environment has been modeled usign a spring and dampers, and the forces caused by hitting the joint limits of a conrtolled manipulator were considered. Finally, some experimental results of force mapping algorithm have been presented.