• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.623-628
• /
• 2001

The styling of passenger car wheels and their effect on vehicle appearance has increased in importance in recent years. The wheel designer has been given the task of insuring that a wheel design meets its engineering objectives without affecting the styling theme. The wheel and tire system is considered as a vehicle component whose dynamic modal information of the tire/wheel system are employed in the modal synthesis model of the vehicle. The Vibration characteristics of a passenger car wheel play an important role to judge a ride comfortability and quality for a passenger car. In this paper, the vibration characteristics of a AI-alloy and steel wheel for passenger car are studied. Natural frequency, damping and mode shape are determined experimentally by frequency response function method. Results show that wheel material property, size and design are parameter for shift of natural frequency and damping.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1729-1734
• /
• 2000

Complex dispersion relations in a cylindrical, foam-lined duct were successfully identified by using an iterative Prony series method. Techniques for using the iterative procedure successfully are described in detail, particularly with regard to model order selection and the identification of parameter starting values. It is shown that modal wave speeds and spatial attenuations per wavelength can be derived from the complex dispersion relations obtained using the iterative procedure. In addition, a finite element simulation is shown to well represent corresponding experimental measurement in terms of modal wave speeds and spatial attenuations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.363-368
• /
• 1993

Hilbert Transform has been used for detection of nonlinearity in modal analysis. HTD(Hilbert Transform Describers) are used to quantify and identify nonlinearity. Mottershead and Stanway method for identification of N-th power velocity nonlinear damping are extended to P-th power displacement stiffness, N-th power velocity damping and dry friction. Time domain and frequency domain data are used and HTD and Mottershead methods are combined for identification of nonlinear parameters in this paper. Computer simulations and experimental results are shown to verify nonlinear structure identification methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.917-922
• /
• 1992

Resently there have been increasing interests in adaptive identification and control of flexible structures. In this paper, vector channel lattice filters and their applications to parameter identification of flexible structures are studied. Numerical examples are given to show its performace to estimate the natural frequencies of 5-mass system. It is observed that vector channel lattice filter convetges quickly and identifies modal frequencies even when some of them is unobservable for some measurements. Experimental results demonstrated the ability of the lattice filter to identify the natural frequencies and the damping ratios of cantilever beam and pipe.

• Composites Research
• /
• 제14권1호
• /
• pp.39-46
• /
• 2001

본 논문에서는 신경망 제어기를 이용하여 복합재 보의 적응 다중 모드 진동 제어에 관한 실험적 연구를 수행하였다. 신경망 제어기는 계산량이 많기 때문에 실시간 적용에 어려움이 따른다. 본 논문에서는 진동 신호를 모드별로 분리하기 위한 적응 노치 필터를 제안하였다. 연결 강도의 개수가 적어서 계산량이 적은 두 개의 신경망 제어기를 이용하여 각 모드의 제어력을 계산하였다. 끝단 질량의 위치의 차이로 인해 고유 진동수가 다른 두 시편 A, B에 대하여 적응 노치 필터와 신경망 제어기를 이용한 적응 진동 제어를 수행한 결과, 두 경우 모두 효과적으로 진동 제어가 이루어졌다. 이러한 결과로 시스템 파라미터의 변환에 대한 신경망 제어기의 적응 진동 제어 성능을 확인할 수 있다.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.119-127
• /
• 2006

A non-destructive time domain approach to examine structural damage using parameterized partial differential equations and Galerkin approximation techniques is presented. The time domain analysis for damage detection is independent of modal parameters and analytical models unlike frequency domain methods which generally rely on analytical models. The time history of the vibration response of the structure was used to identify the presence of damage. Damage in a structure causes changes in the physical coefficients of mass density, elastic modulus and damping coefficients. This is a part of our ongoing effort on the general problem of modeling and parameter estimation for internal damping mechanisms in a composite beam. Namely, in detecting damage through time-domain or frequency-domain data from smart sensors, the common damages are changed in modal properties such as natural frequencies, mode shapes, and mode shape curvature. This paper examines the use of beam-like structures with piezoceramic sensors and actuators to perform identification of those physical parameters, and detect the damage. Experimental results are presented from tests on cantilevered composite beams damaged at different locations and different dimensions. It is demonstrated that the method can sense the presence of damage and obtain the position of a damage.

• Earthquakes and Structures
• /
• 제4권2호
• /
• pp.203-217
• /
• 2013

In recent decades, it has been realized that increasing the lateral stiffness of structure subjected to lateral loads is not the only parameter enhancing safety or reducing damage. Factors such as ductility and damping govern the structural response due to lateral loads. Despite the significant contribution of damping in resisting lateral loads, especially at resonance, there is no accurate mathematical representation for it. The main objective of this study is to develop a damping identification procedure for linear systems based on a mixed numerical-experimental approach, assuming viscous damping. The proposed procedure has been applied to a laboratory experiment associated with a numerical model, where a hollow rectangular steel cantilever column, having three lumped masses, has been fixed on a shaking table subjected to different exciting waves. The modal damping ratio has been identified; in addition, the effect of adding filling material to the hollow specimen has been studied in relation to damping enhancement. The results have revealed that the numerically computed response based on the identified damping is in a good fitting with the measured response. Moreover, the filling material has a significant effect in increasing the modal damping.

• 한국지진공학회논문집
• /
• 제14권2호
• /
• pp.57-65
• /
• 2010

비닐하우스를 구성하는 세장한 강재 파이프 아치의 정적좌굴 하중을 결정하고 전체구조성능을 평가하기 위하여 수직하중을 단계별로 부가하고 고정햄머 및 이동센서 형식을 취한 일련의 충격하중 진동실험을 수행하였다. 수직 및 수평보조재가 없는 내부아치의 거동 조사에 보다 중점을 두었으며, 계측한 입력-출력 진동기록에 대하여 최신 개발된 고급판별법인 PolyMAX법을 적용하여 고유진동수, 모드형태 및 감쇠율 등과 같은 모달계수를 추출하였다. 이러한 실험결과는 상용 유한요소해석 프로그램인 ANSYS를 사용하여 수행한 다양한 조건의 해석결과와 비교하였으며, 상당히 일치된 경향을 나타냈다. 하지만, 내력의 38%정도에 해당하는 수직하중의 부가에 따른 고유진동수의 감소는 미미한 것으로 나타났다. 이와 관련하여 본 연구의 아치와 같이 매우 세장한 구조물의 현장 진동실험 및 시스템판별 해석을 수행하는데 있어서 예상되는 여러 문제점을 신중하게 토의하였다.

• Steel and Composite Structures
• /
• 제27권3호
• /
• pp.327-335
• /
• 2018

This paper presents structural assessment of a steel railway bridge for current condition using modal parameter to upgrade finite element modeling in order to gather accurate result. An adequate monitoring, such as acceleration, displacement, strain monitoring, is important tool to understand behavior and to assess structural performance of the structure under surround vibration by means of the dynamic analysis. Evaluation of conditions of an existing steel railway bridge consist of 4 decks, three of them are 14 m, one of them is 9.7 m, was performed with a numerical analysis and a series of dynamic tests. Numerical analysis was performed implementing finite element model of the bridge using SAP2000 software. Dynamic tests were performed by collecting acceleration data caused by surrounding vibrations and dynamic analysis is performed by Operational Modal Analysis (OMA) using collected acceleration data. The acceleration response of the steel bridge is assumed to be governing response quantity for structural assessment and provide valuable information about the current statute of the structure. Modal identification determined based on response of the structure play significant role for upgrading finite element model of the structure and helping structural evaluation. Numerical and experimental dynamic properties are compared and finite element model of the bridge is updated by changing of material properties to reduce the differences between the results. In this paper, an existing steel railway bridge with four spans is evaluated by finite element model improved using operational modal analysis. Structural analysis performed for the bridge both for original and calibrated models, and results are compared. It is demonstrated that differences in natural frequencies are reduced between 0.2% to 5% by calibrating finite element modeling and stiffness properties.

• Earthquakes and Structures
• /
• 제12권6호
• /
• pp.689-697
• /
• 2017

Nowadays, there are a great number of various structures that have been retrofitted by using different FRP Composites. Due to this, more researches need to be conducted to know more the characteristics of these structures, not only that but also a comparison among them before and after the retrofitting is needed. In this research, a model steel structure is tested using a bench-scale earthquake simulator on the shake table, using recorded micro tremor data, in order to get the dynamic behaviors. Beams of the model steel structure are then retrofitted by using CFRP composite, and then tested on the Quanser shake table by using the recorded micro tremor data. At this stage, it is needed to evaluate the dynamic behaviors of the retrofitted model steel structure. Various types of methods of OMA, such as EFDD, SSI, etc. are used to take action in the ambient responses. Having a purpose to learn more about the effects of FRP composite, experimental model analysis of both types (retrofitted and no-retrofitted models) is conducted to evaluate their dynamic behaviors. There is a provision of ambient excitation to the shake table by using recorded micro tremor ambient vibration data on ground level. Furthermore, the Enhanced Frequency Domain decomposition is used through output-only modal identification. At the end of this study, moderate correlation is obtained between mode shapes, periods and damping ratios. The aim of this research is to show and determine the effects of CFRP Composite implementation on structural responses of the model steel structure, in terms of changing its dynamical behaviors. The frequencies for model steel structure and the retrofitted model steel structure are shown to be 34.43% in average difference. Finally, it is shown that, in order to evaluate the period and rigidity of retrofitted structures, OMA might be used.