• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.8-21
• /
• 1996

본 연구의 목적은 1축압축을 받는 판 및 보강판의 최종강도추정을 위한 경험식의 도출에 있다. 이를 위해 다른 연구자에 의해 수행된 많은 실험결과를 정리 하였고, 식의 도출에 있어서 넓은 범위의 판의 치수에 대한 이들 실험결과의 유용성을 확인하였다. 또한, 필요한 치수범위에 있어서 편면보강재를 가진 보강판에 대한 압축 최종강도 실험을 추가적으로 수행하였다. 본 실험과 기존의 실험결과를 바탕으로 최소자승법에 의해 보다 더 유용한 경험식을 도출하였다.

• Wind and Structures
• /
• 제17권3호
• /
• pp.275-298
• /
• 2013

This paper presents a number of approximated analytical formulations for the flutter analysis of long-span bridges using the so-called uncoupled flutter derivatives. The formulae have been developed from the simplified framework of a bimodal coupled flutter problem. As a result, the proposed method represents an extension of Selberg's empirical formula to generic bridge sections, which may be prone to one of the aeroelastic instability such as coupled-mode or single-mode (either dominated by torsion or heaving mode) flutter. Two approximated expressions for the flutter derivatives are required so that only the experimental flutter derivatives of ($H_1^*$, $A_2^*$) are measured to calculate the onset flutter. Based on asymptotic expansions of the flutter derivatives, a further simplified formula was derived to predict the critical wind speed of the cross section, which is prone to the coupled-mode flutter at large reduced wind speeds. The numerical results produced by the proposed formulas have been compared with results obtained by complex eigenvalue analysis and available approximated methods show that they seem to give satisfactory results for a wide range of study cases. Thus, these formulas can be used in the assessment of bridge flutter performance at the preliminary design stage.

• Steel and Composite Structures
• /
• 제31권3호
• /
• pp.291-301
• /
• 2019

Pure torsion loading conditions were not frequently occurred in practical engineering, but the torsional researches were important since it's the basis of mechanical property researches under complex loading. Then a 3D finite element model with precise material constitutive models was established, and the effectiveness was verified with test data. Parametric studies with varying factors as steel yield strength, concrete strength and sectional height-width ratio, were performed. Internal stress state and the interaction effect between encased steel tube and the core concrete were analyzed. Results indicated that due to the confinement effect between steel tube and core concrete, the torsional strength of CFT columns was greatly improved comparing to plain concrete columns. The steel ratio would greatly influence the torque share between the steel tube and the core concrete. Then the torsional strength calculation formulas for core concrete and the whole CFT column were proposed. The proposed formula could be simpler and easier to use with guaranteed accuracy. Related design codes were more conservative than the proposed formula, but the proposed formula presented more satisfactory agreement with experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.821-825
• /
• 2005

Tilt rotor aircraft was developed for satisfying VSTOL (vertical short take off and landing) capability and cruise performance. However the noise generated by tilt rotor system causes one of the most serious problems. In this paper, noise characteristics of tilt rotor system in hovering flight are predicted by using free wake method and Lowson's formula. The flow field of the tilt rotor is simulated by using time marching free wake method, and the free field acoustic pressure is calculated through Lowson's formula. The predicted results are compared with experimental data at various observing positions. In the near field, they show good agreement with experimental data regardless of rotating speed and collective pitch angles of 6, 8 and 10 degree, although there are some discrepancies between prediction and experiment in the far field and at the rotating axis in the near field. It seems that the reason of these discrepancies is difference of unsteady force fluctuation between experiment and calculation.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.635-644
• /
• 2005

This paper is. a study on relation between road traffic noise(RTN) and sound power level(PWL). At present, many experimental formulae and prediction formulae are used for prediction of RTN. But these formulae are difficult to appiy to the metropolitan area because these formulae are inaccurate in the different condition from reference condition. This paper calculate RTN and PWL of each prediction formula, choose the best one and make a noise map of the subject area. Procedure is as follows. First, calculate $L_{eq}$ of RTN using experimental formulae and prediction formulae. Second, calculate PWL using $L_{eq}$ of RTN and distance attenuation for point source at semi-free field. Third, choose the most accurate formula. And finally, make a noise map of the subject area at present and future. The result using noise map will be able to apply to application field. Noise mapping tool used on this paper is Raynoise program using Ray Tracing Method(RTM), Mirror Image Source Method(MISM) and Hybrid Method(HM).

• Journal of Korean Biological Nursing Science
• /
• 제10권2호
• /
• pp.105-112
• /
• 2008

Purpose: The purpose of this study was to investigate the difference in the incidence of diarrhea among the subjects given hypertonic and isotonic nutrients to the nasogastric tube feeding patients in the a critical care setting. Methods: This study is aquasi-experimental study with a pre & post-test design. The sample size of 40 was calculated based on Cohen's formula (1988). The total of 40 subjects who signed the informed consent were randomly selected and divided evenly into two groups, experimental and control group. Results: There are no significant differences between the two groups in homogeneity test (sex, age, albumin level, the use of antibiotics, antacid, and $H_2$ blocker). However, the frequencies of occurrence in diarrhea according to the density of nutrients formulation indicated a statistical difference at the level of .005 (p=.001): diarrhea occurred in four of 20 (20%) of the experiment group, but 14 (70%) of the control group. Also the onset date of diarrhea in the experiment group is later than that of the control group. Conclusion: The research findings suggest that we should begin with low density nutrients for nasogastric tube feeding, and increase its density gradually to decrease diarrhea incidence in the critical care setting.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.83-87
• /
• 2008

Although a great deal of research has been carried out to solve the plate forming problem and to improve the effectiveness and productivity of the plate forming process, no practical way of automating the plate forming process has been proposed yet. Since characteristics of heating machines may vary, it is necessary to investigate the thermal deformation characteristics of the heating machine that will be used in the automation system its characteristics may be modified as new information about thermal deformation by heating becomes available. In this paper, experiments for line heating have been carried out to calculate the formula of predicting thermal deformation due to line heating with varying affecting parameters, and numerical study has been carried out to produce data beyond the range where a line heating test is impractical. Formulas of predicting transverse distortion and shrinkage have been proposed and derived, based on the present experimental and numerical works. This paper also illustrates how the formula has been modified as new experimental data are added.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1802-1812
• /
• 2001

The purpose of this study is to analyze numerically the movement of particles included in turbulent fluid flow characteristics of metallic surfaces. To describe fluid flew, the incompressible Navier-Stokes equation discretized by the finite volume method were solved on the non-orthogonal coordinates with non-staggered variable arrangement, and the k-$\xi$ turbulence model was adapted. After fluid flow was calculated, particle movement was predicted from the Lagrangian approaches. Non-essential complexities were avoided by assuming that the particles had spherical shapes and the Stoke's drag formula only consisted of external farces acting upon them. In order to validate the numerical calculations, the results were compared with the experimental data reported in literature and agreed well with them. The drag force coefficient equation showed better agreement with the experimental data in the prediction of particle movement than the correction factor equation. Impact velocity and impact angle increased as inlet turbulence intensity decreased, relative jet height was lower. or the Reynolds number was larger.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.387-394
• /
• 1999

Artificial Neural Network (ANN) is a computational model inspired by the structure and operations of the brain. It is massively parallel system consisting of a large number of highly interconnected and simple processing units. The purpose of this paper is to verify the applicability of ANN to predict experimental results through the use of measured experimental data. Although there have been accumulated data based on hysteretic characteristics of structural element with cyclic loading tests, it is difficult to directly apply them for the analysis of elastic and plastic response. Thus, simple models with mathematical formula such as Bi-Linear Model, Ramberg-Osgood Model, Degrading Tri Model, Takeda Model, Slip type Model, and etc, have been used. To verify the practicality and capability of this study, ANN is adapted to several models with mathematical formula using numerical data To show the efficiency of ANN in nonlinear analysis, it is important to determine the adequate input and output variables of hysteretic models and to minimize an error in ANN process. The application example is Beam-Column joint test using the ANN in modeling of the linear and nonlinear hysteretic behavior of structure.

• 대한한의학방제학회지
• /
• 제24권3호
• /
• pp.175-193
• /
• 2016

Objective : Diuretics are effective on the patients with hypertension and heart failure, as well as edema by regulating the function of kidney, which is key organ to maintain the balance of the different electrolytes in the body. The present review article is designed to review the diuretic effect of Korean medicinal prescription base on the experimental studies.Method : For this purpose, every article related to ‘diuresis’ and 'Korean medicinal prescription' were analysed from articles which published at domestic and international journals.Results : 1. Representative Korean medicine prescriptions showed diuretic effect along with electrolyte excretion were Oryeong-san, Paeryung-tang, Hwangryungbokryung-tang and Daeganghwal-tang. 2. Some Korean medicinal prescription including Oryeong-san, Jueryeong-tang, Sipcho-tang distribute diuresis through the inhibition of renin-angiotensin-system. 3. Oryeong-san, Bojungchiseup-tang had a diuretic effect on the down-regulation of aquaporin water channel in the renal collecting duct.Conclusion : Korean medicinal transcriptions have a diuretic effect through several types of mechanism such as along with electrolytes excretion, inhibition of renin-angiotensin system, and down-regulation of water channels.