• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.177-183
• /
• 2009

The research develops random ordering methodology of experimental design by the use of nested factor, block factor and repetition types. The spreadsheets developed are useful for quality practioner to acquire the experimental characteristics according to the random ordering.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1466-1472
• /
• 2018

A key comparison has been made between the air-kerma standards of the National Institute of Metrology (NIM), China, and other Asia Pacific Metrology Programme (APMP) members in the medium-energy X-ray. This paper reviews the primary standard Free-air ionization chamber correction factor experimental method and Monte Carlo simulation method in the NIM. The experimental method and the Monte Carlo simulation method are adopted to obtain the correction factor for the medium-energy X-ray primary standard free-air ionization chamber at 100 kV, 135 kV, 180 kV, 250 kV four CCRI reference qualities. The correction factor has already been submitted to the APMP as key comparison data and the results are in good agreement with those obtained in previous studies. This study shows that the experimental method and the EGSnrc simulation method are usually used in the measurement of the correction factor. In particular, the application of the simulation methods is more common.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.

• 품질경영학회지
• /
• 제41권1호
• /
• pp.119-134
• /
• 2013

Purpose: The purpose of this paper is to show whether the results are changed with respect to the variance of the data, by analysis of data obtained from the Taguchi experimental techniques and general experiment. Because which cannot be prove by mathematical Formula, through experimental examples will show. Methods: Taguchi experiments were carried out with paper Helicopter experiment. Experimental Data are obtained by special designed Drop Test Equipment. While Experimental value arbitrarily changed, we looked at how Significant control Factor of Taguchi Methods and Factor experiments are changed. This process cannot be expressed as a Mathematical formula, but showed as a numerical example. Results: Saw significant changes in the factors when data is outside a certain range of the experimental data. By Test of Equivalence Variance, Experiment data is verified reliability. To find the Control Factor, Taguchi Method is better than the general experiment. Conclusion: We know that a Significant Factor is changed with the range of Variance of Experiment Data. The value of this paper is verified change process with Numerical Data obtained Experiment.

• Journal of Periodontal and Implant Science
• /
• 제26권4호
• /
• pp.799-821
• /
• 1996

The ultimate goal of periodontal treatment has been to facilitate regeneration of diseased periodontal tissues, destroyed by inflammatory periodontal disease. For regeneration of the periodontium to occur, all of component tissues must be restored to their original position and architecture. Growth factors which were known to promote the cellular processes, ie, proliferation, migration and matrix synthesis, have been in the spotlight of current periodontics. Platelet-derived growth factor(PDGF) stimulates collagen and non collagen protein synthesis, migration and proliferation of periodontal ligament cells. Insulin-like growth factor(IGF) has potentials to induce collagen and bone matrix synthesis so that it regulates normal bone remodeling. Application of the combination have been known to facilitate formation of bone and cementum, and to synergistically interact to promote coronal migration and proliferation of periodontal ligament cells. These two growth factors have been reported to exhibit positive effect in the periodontally diseased teeth or class m furcation defects. The aim of the present study was to test the hypothesis that PDGF-BB alone or the combination of PDGF-BB and IGF-I can predictably enhance regeneration of the periodontium in the dehiscence defect. Following the resection of premolars, roots were embedded. After 12 weeks of healing period, standardized experimental $4{\times}4mm$ dehiscence defects were created on the mid-facial of the premolar roots in each of 4 young adult dogs. In control group, only methylcellulose gel was inserted in the defects. In experimental group I and II, gel with $2{\mu}g$ of PDGF-BB or $2{\mu}g$ of PDGF-BB and $1{\mu}g$ of IGF-I was inserted in the defects, respectively. At 8 weeks postsurgery, the dogs were sacrificed. The results were observed histologically and analyzed histomorphometrically.The results of this study were as follws. 1. The new cementum formation was $1.26{\pm}0.69mm$ in the control group, $1.80{\pm}0.84mm$ in the experimental group I, $1.93{\pm}0.51mm$ in the experimental group II. The experimental group III, the experimental group I, the control group were in the order of cementum formation without statistically significant differences between control and all experimental groups. 2. The new bone formation was $1.00{\pm}0.53mm$ in the control group, $1.53{\pm}0.63mm$ in the experimental group I, $l.33{\pm}0.45mm$ in the experimental group II. The experimental group I, the experimental group II, the control group were in the order of bone formation without statistically significant differences between control and all experimental groups. 3. The root resorption was $1.12{\pm}0.64mm$ in the control group, $1.34{\pm}0.73mm$ in the experimental group I, $0.79{\pm}0.59mm$ in the experimental group II without statistically significant differences between control and all experimental groups. These results suggested that the use of PDGF-BB alone or PDGF-BB and IGF-I in the dehiscence defects might facilitate periodontal regeneration in some degree, but has not shown statistically significant results.

• Structural Engineering and Mechanics
• /
• 제19권6호
• /
• pp.639-652
• /
• 2005

In this paper, a full-scale K-joint specimen was tested to failure under cyclic combined axial and in-plane bending loads. In the fatigue test, the crack developments were monitored step by step using the alternating current potential drop (ACPD) technique. Using Paris' law, stress intensity factor, which is a fracture parameter to be frequently used by many designers to predict the integrity and residual life of tubular joints, can be obtained from experimental test results of the crack growth rate. Furthermore, a scheme of automatic mesh generation for a cracked K-joint is introduced, and numerical analysis of stress intensity factor for the K-joint specimen has then been carried out. In the finite element analysis, J-integral method is used to estimate the stress intensity factors along the crack front. The numerical stress intensity factor results have been validated through comparing them with the experimental results. The comparison shows that the proposed numerical model can produce reasonably accurate stress intensity factor values. The effects of different crack shapes on the stress intensity factors have also been investigated, and it has been found that semi-ellipse is suitable and accurate to be adopted in numerical analysis for the stress intensity factor. Therefore, the proposed model in this paper is reliable to be used for estimating the stress intensity factor values of cracked tubular K-joints for design purposes.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.361-377
• /
• 1998

The measurement of welding temperature of connector is usually performed with an infra red temperature gauge. However, the factors, which influence the temperature measurement, are rarely known. This research used the welding temperature measurement of the connector as an example, applying the experimental design, in two-phase experiments, to search the affecting factors. In phase-I experiment, we used a resolution III, seven-factor fractional factorial design with two levels for each factor. The result showed that none of the factor was significant in affecting the welding temperature when the type I error ${\alpha}$ was 0.05. Next, we did the phase-II factorial experiment with three factors and each factor had three levels. The experiment showed the experimental time was significant in affecting the temperature measurement when the type I error ${\alpha}$ was 0.05. Further Duncan's multiple range tests on the second experimental data showed that the later the experimental time, the weaker the light intensity could have on the temperature measurement and the average of the highest temperatures was lower. Moreover, the later the experimental time, the smaller was the variance of the temperature measurement and the difference between the averages of the highest and the lowest temperatures was also lower.

• 설비공학논문집
• /
• 제14권3호
• /
• pp.231-239
• /
• 2002

Experiments on the single phase cooling heat transfer and pressure drop with microfin tubes were performed using water as a test fluid. Experimental data were obtained in the range of Reynolds number 3000 ~40000 and Prandtl number 4-6. The data of microfin tubes presented the characteristics of rough surface tube in pressure drop and heat transfer Experimental data were compared with the heat transfer and friction factor correlations of smooth tubes. Heat transfer enhancements of microfin tubes were lower than pressure drop penalty factors. The helix angle is more significant parameter in both of the pressure drop and heat transfer than the relative roughness. The correlations of Nusselt number and friction factor were suggested for the tested microfin tubes. Maximum deviations between correlations and experimental data were within $\pm15$% for Nusselt number and $\pm10$% for friction factor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.359-364
• /
• 2002

Statistical energy method is widely used for the prediction of vibrational and acoustical behavior of complex structures, such as ship building and automobile in mid-, high frequency ranges. However. in order to convince this SEA result, it is important to verify estimated SEA parameters, e. g. modal density, energy in each subsystem, damping loss factor, coupling loss factor. with possible other method. For modal density parameter, the experimental estimations via Experimental Modal Analysis are checked with those from finite element method for both beam- plate and plate-plate cans. Loss factors are calculated by Lyon's simple method for the two subsystem. finally. modal experiments are carried out by varying the mass added on the junction of two subsystem for the purpose of investigating the influence on the coupling loss factor's behavior.

• 한국의류학회지
• /
• 제14권4호
• /
• pp.314-323
• /
• 1990

The purpose of this study is to investigate the visual effect of stripe patterns in one-piece dress. The results of the visual effects are as follows; 1. Comparision with experimental stripe patterns; experimental stripe patterns are likely to appear to be fat and wide in shape, and to be rhythmic, active, modern, unstable, not beautiful and dislike in sense. 2. The correlation between terms; there is a considerable correlation between 'the whole body looks fat 'and' the upper body looks fat'(r=0.84) when experimental stripe patterns are compared with vertical stripe pattern. When experimental stripe patterns compared with horizontal stripe patterns, there is a considerable correlation between 'rhythmic' and 'active' (r=0.90). 3. The results of factor analysis: commonly, factor 1 resulted in character of bodily shape and factor 2 resulted in sensuous charactor.