• 말소리와 음성과학
• /
• 제3권1호
• /
• pp.35-43
• /
• 2011

The purpose of this paper is to evaluate the viability of employing the intonation exaggeration technique proposed in [4] in teaching English prosody to university students. Fifty-six female university students, twenty-two in a control group and the other thirty-four in an experimental group, participated in a teaching experiment as part of their regular coursework for a five-and-a-half week period. For the study material of the experimental group, a set of utterances was synthesized whose intonation contours had been exaggerated whereas the control group was given the same set without any intonation modification. Recordings from both before and after the teaching experiment were made and one sentence set was chosen for analysis. The parameters analyzed were the pitch range, words containing the highest and lowest pitch points, and the 3-dimensional comparison of the three prosodic features [2]. An AXB and subjective rating test were also performed along with a qualitative screening of the individual intonation contours. The results showed that the experimental group performed slightly better in that their intonation contour was more similar to that of the model native speaker's utterance. This appears to suggest that the intonation exaggeration technique can be employed in teaching English prosody to students.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.1-6
• /
• 2009

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on machinability evaluation of machinable ceramics for products with CNC machining center. Thus, in this paper, experiment applying cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA, and F-test. And multiple linear regression analysis is applied to compare experimental with predicted data in consideration of surface roughness. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.9-19
• /
• 2019

This paper describes an experimental investigation on hybrid fiber reinforced concrete (HYFRC) beams. And the main aim of this present paper is to examine the dynamic characteristics and damage evaluation of undamaged and damaged HYFRC beams under free-free constraints. In this experimental work, totally four RC beams were cast and analyzed in order to evaluate the dynamic behavior as well as static load behavior of HYFRCs. Hybrid fiber reinforced concrete beams have been cast by incorporating two different fibers such as steel and polypropylene (PP). Damage of HYFRC beams was obtained by cracking of concrete for one of the beams in each set under four-point bending tests with different percentage variation of damage levels as 50%, 70% and 90% of maximum ultimate load. And the main dynamic characteristics such as damping, fundamental natural frequencies, mode shapes and frequency response function at each and every damage level has been assessed by means of non-destructive technique (NDT) with hammer excitation. The fundamental natural frequency and damping values obtained through dynamic tests for HYFRC beams were compared with control (reference) RC beam at each level of damage which has been acquired through static tests. The static experimental test results emphasize that the HYFRC beam has attained higher ultimate load as compared with control reinforced concrete beam.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.33-39
• /
• 2018

This study performed experimental validation of the hysteretic steel slit damper's basic and dependent characteristics, which should be considered for the design. The basic characteristic of the steel slit damper is used for determining design properties of non-linear analysis, such as yielding strength, yielding displacement, elastic stiffness and post-yielding stiffness. In order to evaluate dependent characteristics of the hysteretic steel slit damper, repeated deformation capacity with respect to the displacement, velocity and aspect ratio of the damper was evaluated. In this study, steel slit damper, which is widely used in Korea, was considered. The slit dampers with 55kN and 240kN of yielding strength were produced and tested. It was concluded that the slit damper's hysteresis behavior was affected by the dependent characteristics: displacement, velocity and aspect ratio. In other words, the steel slit damper's behavior was stable within limit displacement, and aspect ratio of the strut affected repeated deformation capacity of the damper subjected to large deformation. In addition, it was observed that the repeated deformation capacity abruptly decreased at the high speed range (${\geq}60mm/sec$). Furthermore, the experimental results were evaluated with the criterion of the damping device specified in ASCE7-10.

• 한국치위생학회지
• /
• 제23권6호
• /
• pp.459-466
• /
• 2023

Objectives: The purpose of this study was to evaluate the physical properties and antibacterial activity of denture base resin with added silver sulfadiazine. Methods: Specimens were made from self-curing denture base resin and silver sulfadiazine as an inorganic antibacterial agent. For physical evaluation of the specimens, surface roughness, surface hardness, and contact angle were measured. Bacterial growth was assessed by optical densityat 600 nm (OD600) and colony forming units (CFU) measurements to confirm antibacterial activity. Results: There was no significant difference in surface roughness, surface hardness, and contact angle in the experimental group containing silver sulfadiazine compared to the control group. In contrast, the experimental group showed a significant decrease in antibacterial activity compared to the control group in terms of OD value. Analysis of CFU confirmed a significant decrease in colonies in the experimental group compared to the control group. Conclusions: Denture base resin containing silver sulfadiazine, an inorganic antibacterial agent, exhibited enhanced antibacterial activity without physical changes. In conclusion, the use of denture base resin containing inorganic antibacterial agents may be expected in the future.

• 재활간호학회지
• /
• 제13권2호
• /
• pp.161-170
• /
• 2010

Purpose: This study was to confirm the influence of memory intensive training program on the elderly people's cognitive function, memory performance, and self-esteem. Method: Using a quasi-experimental or experimental design, 60 elderly aged over 60 years randomly assigned the experimental and control groups completed pretest-post evaluation. The experimental group participated in the memory intensive training program was offered to the participants in the experimental group for three weeks (2times/week). The t-test and $X^2$-test using SAS program. Results: 1) The cognitive function was significantly higher in the experimental group compared to that in the control group (t=3.26, p=.002). 2) The memory performance that included immediate word recall tasks, word recognition tasks and delayed word recall tasks was significantly higher in the experimental group than in the control group (t=5.30, p<.001). The experimental group showed significantly higher scores for memory performance than the control group (t=5.30, p<.001). 3) The self-esteem was higher in the experimental group than in the control group, but there was no significant difference between the two groups (t=1.94, p=.058). Conclusion: The Memory Intensive Training Program could be an effective intervention for improving cognitive function, and memory performance of the elderly people.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.130-131
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.689-690
• /
• 2011

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.132-133
• /
• 2013

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.107-113
• /
• 2000