• Journal of Korean Society for Quality Management
• /
• v.38 no.3
• /
• pp.413-424
• /
• 2010

Mixture experiments involve combining ingredients or components of a mixture and the response is a function of the proportions of ingredients which is independent of the total amount of a mixture. The purpose of the mixture experiments is to find the optimum blending at which responses such as the flavor and acceptability are maximized. We assume the quadratic or special cubic canonical polynomial model over the experimental region for a mixture since the current mixture is assumed to be located in the neighborhood of the optimal mixture. The cost of the mixture is proportional to the cost of the ingredients of the mixture and is the linear function of the proportions of the ingredients. In this paper, we propose mixture response surface methods to develop a mixture such that the cost is down more than ten percent as well as mean responses are as good as those from the current mixture. The proposed methods are illustrated with the well known the flare experimental data described by McLean and Anderson(1966).

• Journal of the Korean Statistical Society
• /
• v.27 no.1
• /
• pp.133-152
• /
• 1998

The central composite design is widely used in the response surface analysis, because it can fit the second order model with small experimental points. In practice, the experimental data are not always obtained on all the points. When there are missing observations, many problems due to the missing cells can occur. In this paper, the influence of a missing cell on the central composite design is discussed. First, the influences of a missing cell on the variances of estimated regression coefficents are compared as $\alpha$ varies. Second, how the average predition variance is affected by a missing sell is discussed. And the influence on rotatability is investigated. Third, the influence of a missing cell on optimality, especially on D-optimality and A-optimality, is examined.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.302-305
• /
• 2003

The purpose of this study was to assess the effect of surfactant on the rate of NAPLs(non-aqueous phase liquids) solubilization. The experimental variables were surfactant type, NAPLs type and water type. The main experimental designs were consists of two phases. The solubilization rate is sensitive to surfactant type based on this test. Used aqueous surfactants were solubilized and removed 72.77 to 89.90% of toluene, PCE(tetrachloroethylene) from the contaminated water during the test, respectively. T60 has higher and stable recovery ratio than SDS in surfactant type but, the micelle of the T60 is more weaker than that of SDS based on this study's results. And the solubilization rate in used water type was almost same.(deionized water, surface water).

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.71-78
• /
• 2010

Analysis of variance (ANOVA) is a method to analyze the data from the experimental designs comparing two or more groups or treatments at the same time, and is the most effective tool of analyzing more complex data sets with different source of variations. This article describes the logic of ANOVA, the application of the method to the analysis of a simple data set, and the methods available for performing planned or post hoc multiple comparisons between the treatments means. In addition, the common misuse of the techniques is also discussed to emphasize that an inappropriate statistical analysis is potentially far more harmful than poorly conducted research. Lastly, an example is given for illustration purposes.

• Geomechanics and Engineering
• /
• v.9 no.2
• /
• pp.195-205
• /
• 2015

Barricade failures generally occur at the early times of paste backfill when it is fresh in the stopes. The backfill strength increases and need for barricading pressure decreases as a result of the hydration reactions. In this study, paste backfill barricades of Cayeli copper mine were investigated to design cemented mineral processing plant tailings as barricade body concrete. Paste backfill in sub-level caving stopes of the mine needs to be barricaded for only four or five days. Therefore, short term strength and workability tests were applied on several cemented tailings material designs. Barricade failure mechanisms, important points of barricade designing and details of the new concrete material are explained in this work. According to the results obtained with this experimental study, the tailings were assessed to be used in concrete applied as temporary supports such as cemented paste backfill barricades.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.425-430
• /
• 1996

The purpose of this study is to investigate the behavior of the bearing precast concrete (pc) wall structure with hollow core based on experimental tests. In order to evaluate the cyclic performance of the pc walls. Too one story pc walls and ond one reinforced concrete wall are made. The experimental results of pc walls were compared with those values of reinforced concrete (rc) wall. The structural behaviors of pc wall structure with hollow core are similar to those of reinforced concrete bearing wall structure. This study shows that the pc wall with hollow core could be treated as rc wall when designs the pc wall structure against lateral loads

• Journal of the Korean Society of Costume
• /
• v.64 no.8
• /
• pp.138-154
• /
• 2014

The purpose of this study was to propose up-cycling fashion designs, based on guidelines derived from up-cycling fashion brand products and their required elements of the design. The study thus categorized required elements into environment, significance, economy, function, design, and material, then extracted a set of design guidelines. The guidelines for waste resource-based up-cycling fashion design include the followings: First, authenticity, taking mutual environmental relations into account. Second, rarity of products beyond the domain of standardized ready-made goods thanks to manual operation. Third, storytelling, reflecting the consumer history. Fourth, sustainability to signify the circulation of matters. Fifth, experimental characteristic to fulfill creative innovation. Sixth, changeability through interactions with wearers. The investigator decided design concepts based on them and created up-cycling design works with waste plastic bags, shirts, stockings, neckties, outdoor mats, and backpacks in a variety of formative expressive techniques.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.157-162
• /
• 2012

Recently, by focusing on the BIS (Bus Information System) which can provide passengers with real -time bus operation information as a method to improve bus transport allotment ratio, the bus information system has been studied for a decade years. Based on such a trend, this paper analyzes the existing bus information system, as the basis of the results obtained, designs an experimental bus information system which is based on a computer, a zigbee communication, several line tracers.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1214-1216
• /
• 2004

Conventional Switched Mode Power Supplies(SMPS) with diode-capacitor rectifier have distorted input current waveform with high harmonic contents. Typically, these SMPS have a power factor lower than 0,65. To improve with this problem the power factor correction(PFC) circuit of power supplies has to be introduced. PFC circuit have tendency to be applied in new power supply designs. The input active power factor correction circuits can be implemented using either the two-stage or the single-stage approach. In this paper, the comparative analysis of power factor correction circuit using feedforward control with average current mode single-stage flyback method converter and two-stage converter which is combination of boost and flyback converter. The two prototypes of 50W were designed and tested a laboratory experimental. Also, the comparative analysis is confirmed by simulation and experimental results.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.303-309
• /
• 1993

In this paper we have defined two approaches to be error-robust when the precise form of error-structure is unknown. An experiment is optimal by the first criterion if it maximizes the minimum effciency over all candidates of error structure and is optimal by the second if it maximizes the minimum average of the efficiency over all candidates of error structure. In order to appreciate the basic implications of each design criterion, these approaches are applied to two different experimental situations, D- and heteroscedastic G-optimalities.