• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.136-142
• /
• 1998

Despite the fact that vibration and noise of suction and discharge valves are important factors to be considered in reciprocating compressor designs, such are still have many problems to be developed. Subsequently, this paper addresses a thorough investigation to retrieve basic data for designing suction and discharge valve. In achieving this goal, the natural frequencies in suction and discharge valve were calculated using finite elements method and compared with the results of experimental method which is driven by the speaker and detected by the Laser Velocity Transducer. Also, it was found that natural frequencies are much affected by the Young's Modulus at the clamp. Therefore, improved experimental setup is suggested to consider the effect of clamping conditions. Consequently improved experimental data have good agreements with the FEM data.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.434-440
• /
• 2000

This study is focused on the performance prediction and design of the centrifugal pump with optimum shape. Design and analysis of centrifugal pump rely on experience of designer due to many fluid mechanical and geometrical variables. In this study, a design method was developed with experimental factors and analysed the method by comparition with 2nd-order vortex panel method. Impeller is the most important component affecting the performance of the centrifugal pump. The predicted total head for three cases, of which designs were determined by this method, agrees well with a particular commercial pump. This study shows that satisfactory performance of an optimal pump shape can be obtained through the automatic design routine.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.940-945
• /
• 2001

Gasoline engine manufacturers are currently considering designs that will result in low combustion air temperature for improvement of fuel consumption and emission levels. There are a variety of cooling systems that can be used to accomplish this goal. Cooling is therefore normally achieved through a balance of ram and fan action. This paper studies the various systems and compare the cooling performance for several conditions, based on a automotive engine. An experimental analysis was developed to predict the interaction of the fan system and the heat exchangers of the engine cooling system. The local temperature induced by the fan on the cooling system is measured. These experimental result were accomplished using airflow management techniques.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.301-313
• /
• 2015

This study purposes on continuing experimental research of furniture form creation focused on the importance and necessity for a-formal concept for designers to drift away from general acknowledgement and practice routine to design more radical forms for meeting various needs of late industrialized society, which have not been satisfied with formal and universal designs. This study covers presenting new points of view on research for designers to look for different solutions to widen their consideration in the process of furniture form development and to set up academic data base with the case studies of designers in anti-construction concept to define their experimental challenges for new design form creation, on the basis of overall research on the effects and roles of a-formal approach in the furniture design form creation.

• Journal of Korean Society for Quality Management
• /
• v.7 no.2
• /
• pp.22-28
• /
• 1979

The problem considered in this paper is to select the vital factor effect to the product quality through the experimental design and analysis of response surface, so as to control the quality improvement of industrial product. In this time, even through the mathematical model is unknown it could be applicable to control the quality of industrial products and to determine optimum operating condition for many technical fields, particulary, for industrial manufacturing process. When a set of data is available from an experimental design, it is often of interest 1:0 fit polynominal repression model in independent variables (eg, time, temperature, pressure, etc) the optimize the response variable (eg. yield, strength etc). This paper proposes a method known to obtain the optimum operating condition, and how to find the condition by using table of orthogonal array experiments, and optimization methodology of statistical model. A criterion can be applied determining to optimum operating conditions in manufacturing industry and improving the fit of response surface which may be used for prediction of responses and quality control of industrial products.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.15 no.1
• /
• pp.120-127
• /
• 2009

Purpose: In the literature power analysis in experimental studies is often executed and reported falsely. This descriptive study was done to promote the correct application of the Cohen(1988)'s power analysis method. Method: Articles of experimental studies from a nursing journal were selected and reviewed to examine the uses of and the reports on the power analysis process. Also, the appropriate power analysis process was discussed with an example of the most common experimental design, an independent two-group design with t test analysis plan. Result: Around half the experimental studies examined reported that they carried out power analysis. Cohen's method was the most frequently utilized but with accuracy in question. Conclusion: Power analysis to estimate sample size is the interplay between alpha, power, and effect size, and other factors in the case of t test analysis. Researchers should have a clear understanding of how to apply the Cohen's power analysis method so they do not produce poorly estimated sample sizes.

• Journal of Korean Elementary Science Education
• /
• v.24 no.5
• /
• pp.518-530
• /
• 2005

The purpose of this study was to investigate the characteristics of pre-service primary teachers' justifying their hypotheses about the brightness of electric bulbs. They conducted their experiments and wrote their experimental results and ideas on their worksheets. The worksheets for generating and evaluating scientific hypothesis were analyzed. Most of them generated the consumption hypothesis and designed the experiments to confirm their hypotheses or directly measure without the change of experimental conditions. The responses for valid experimental designs were $74\%$ of total responses. The $62\%$ of total responses was valid prediction for experimental results. The $60\%$ of pre-service teachers described the experimental results correctly. But other teachers described the biased results or inappropriate results. The $54\%$ of them refuted hypotheses and the $36\%$ confirmed their hypotheses. The theory-based responses were $51\%$ and the evidence-based responses were $47\%$. The $64\%$ of them proposed the possibility of the alternative hypothesis after testing their hypotheses. This study also discussed the implications of these findings for teaching and Loaming in science education.

• Journal of Korean Society for Quality Management
• /
• v.13 no.2
• /
• pp.66-72
• /
• 1985

The objective of mixture experiments with process variables is to find experimental blends and conditions that produce the product of highest quality. In this paper, designs for mixture experiments with process variables are presented, where the emphasis is on using only a fraction of the total number of possible design points and the fitting of reduced models for measuring the effects of the mixture components and process variables.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.82-87
• /
• 1997

This paper presents a method about the modeling of the medium - small diesel engine for the speed control and designs the robust speed control system by the $\mu$-synthesis, which has good performance, in spite of the existence of model uncertainities and the external disturbance. We confirmed the validity of the proposed modeling method and the designed control system by $\mu$-synthesis through the experimental responses.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.100-107
• /
• 2003

This paper represents a disturbance compensation control for attenuating disturbance responses. In the consideration of the requirements on the model accuracy in the model based compensator designs, an experimental feed forward compensator design based on adaptive estimation by Filtered-x least mean square (FXLMS) algorithm is proposed. The convergence properties of the FXLMS algorithm are discussed and its conditions for the asymptotic convergence are derived theoretically. The effectiveness of the proposed method and the theoretical proof are verified by computer simulation.