• Journal of Veterinary Clinics
• /
• v.20 no.3
• /
• pp.286-293
• /
• 2003

The cardiopulmonary and antagonistic effects of atipamezole, to medetomidine (30 ug/kg, IM)-tiletamine/zolazepam (10 mg/kg, IV) were determined. Twelve healthy mongrel dogs ,(4.00$\pm$0.53 kg, mean$\pm$SD) were randomly assigned to the four experimental groups (control, A30; atipamezole 30 ug/kg, A60; atipamezole 60 ug/kg, A150; atipamezole 150 ug/kg) with 3 dogs in each group. Atropine (0.03 mg/kg, IM), medetomidine, and tiletamine/zolazepam (TZ) were injected 10 minute intervals. Atipamezole was injected intravenously 15 minutes after TZ injection. Mean arousal time (MAT) was 52.50$\pm$4.98, 43.06$\pm$2.60, 32.83$\pm$8.13, and 14.36$\pm$1.60 minutes in control, A30, A60, and Al50 groups respectively. In Al50 group, MAT was significantly reduced (P < 0.05). but mean walking time (MWT) was similar to that in control group. In recovery period, the higher doses of atimapezole, the rougher recovery including head rocking, hypersalivation, and muscle twitching. Five of twelve dogs vomited within 5 minutes after medetomidine injection. In Control group, heart rate significantly decreased in all recording stages except 15 minutes after TZ injection, 10 minutes after medetomidine injection in all groups, and 40 minutes after atipamezole injection in A30 group (P < 0.05). In Al50 group, atipamezole reversed the respiratory depression induced by medetomidine. Arterial blood pressure was significantly decreased 10minutes after medetomidine injection and 15 minutes after TZ injection in almost dogs in this study (P < 0.05). From 10 minutes after atipamezole injection to arousal time, arterial blood pressure was progressively increased in A60 and A150 group. Any value of blood gas analysis and CBC, and serum chemistry values were not significantly changed except pH of Al50 at 10 minutes after medetomidine injection. As shown in present study, atipamezole(150 ug/kg) is considered to exert a useful reversal effect in dogs anesthetized with medetomidine-tiletamine/zolazepam combination.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.4
• /
• pp.269-278
• /
• 2002

Objective s: Chromosome aneuploidy is associated with recurrent abortion and congenital anomaly and genetic diseases occur repeatedly in the specific families. Preimplantation genetic diagnosis (PGD) can prevent aneuploidy or genetic disease by selecting normal embryos before implantation and is an alternative to prenatal diagnosis. The aim of this study is to assess the outcome of PGD cycles by using FISH or PCR, and to determine the clinical usefulness and values in patients with risk of chromosomal aneuploidy or genetic disease. Materials and Methods: From 1995 to Apr. 2001, a total of 108 PGD cycles in 65 patients with poor reproductive outcome were analyzed. The indications of PGD were translocation (n=49), inversion (n=2), aneuploidy screening (n=7), Duchenne muscular dystrophy (n=5) and spinal muscular atrophy (n=2). PGD was applied due to the history of recurrent abortion, previous birth of affected child or risk of aneuploidy related to sex chromosome aneuploidy or old age. Blastomere biopsy was performed in 6$\sim$10 cell stage embryo after IVF with ICSI. In the single blastomere, chromosome aneuploidy was diagnosed by using FISH and PCR was performed for the diagnosis of exon deletion in DMD or SMA. Results: The FISH or PCR amplification was successful in 94.3% of biopsied blastomeres. The rate of transferable balanced emb ryos was 24.0% in the chromosome translocation and inversion, 57.1% for the DMD and SMA, and 28.8% for the aneuploidy screening. Overall hCG positive rate per transfer was 17.8% (18/101) and clinical pregnancy rate was 13.9% (14/101) (11 term pregnancy, 3 abortion, and 4 biochemical pregnancy). The clinical pregnancy rate of translocation and inversion was 12.9% (11/85) and abortion rate was 27.3% (3/11). In the DMD and SMA, the clinical pregnancy rate was 33.3% (3/9) and all delivered at term. The PGD results were confirmed by amniocentesis and were correct. When the embryos developed to compaction or morula, the pregnancy rate was higher (32%) than that of the cases without compaction (7.2%, p<0.01). Conclusions: PGD by using FISH or PCR is useful to get n ormal pregnancy by reducing spontaneous abortion associated with chromosome aneuploidy in the patients with structural chromosome aberration or risk of aneuploidy and can prevent genetic disease prior to implantation.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.3
• /
• pp.345-352
• /
• 2011

TMR feed was developed by adding mugwort (Artemisia capillaris), and was fed to Hanwoo cattle to investigate the effects of feeding mugwort on the physicochemical and sensory characteristics of rump meat, and to determine the feasibility of producing Hanwoo beef with high quality and functionality. The experimental samples consisted of the Hanwoo rump from cattle fed with fattening TMR feed without mugwort (T0), and those fed with fattening cattle TMR feed supplemented with mugwort (T1). T1 was significantly higher than T0 for Hanwoo rump characteristics of Hunter's $L^*$, $a^*$, $b^*$ values (p<0.05). VBN content for T0 was significantly higher than for T1, and EDA for T1 was significantly higher than for T0 (p<0.05). There was no significant difference between T0 and T1 in terms of pH, TBARS, and total bacterial numbers. Water holding capacity for T1 was significantly higher than for T0 (p<0.05), but there was no significant difference between T0 and T1 in terms of freezing loss, thawing loss, and cooking loss. Springiness for T1 was significantly higher than for T0 (p<0.05), and there was no significant difference between T0 and T1 in terms of hardness, cohesiveness, gumminess, chewiness, and shear force. There was no significant difference between T0 and T1 in terms of acid value, peroxide value, and iodine value. However, the melting point for T1 was significantly lower than for T0 (p<0.05). Aroma of raw meat for T1 was significantly superior to aroma for T0 (p<0.05). Taste, palatability of boiled meat, and juiciness of roasted meat for T1 were significantly superior to those parameters for T0 (p<0.05). These results suggest that the feed containing mugwort can be used to improve color and sensory characteristics, inhibit VBN formation, and also to increase antioxidant ability as a functional feed.

• Korean Journal of Poultry Science
• /
• v.43 no.4
• /
• pp.207-212
• /
• 2016

This work was carried out to investigate the ability of thirteen crossbreds for production of commercial chicken (CC) of Korean native chicken to be cut out for Korean circumstance. Total of one thousand three hundred of crossbreds were divided thirteen groups (100 birds/group) that were twelve groups (1A, 1B, 2A, 2B, 3A, 3B, 4A, 4B, 5A, 5B, 6A, 6B) to crossbreed with two sires (A, B) and six dams (1, 2, 3, 4, 5, 6) of parent stock (PS) of Korean native chicken and one group (HH) as commercial Korean native chicken. Experimental diets were starter diet (0~7d; CP 22.0% ME 3,150 kcal/kg), early diet (8d~Wt 800 g; CP 19.0% ME 3,150 kcal/kg) and finished diet (Wt 800 g~12 wk; CP 18.0% ME 3,150 kcal/kg). Fertility of 1B group was higher than other groups. Hatchability per fertilization eggs and hatchability per setting eggs were 87.5~89% and 87.9~96.3%, respectively, and those of 4B and 6B groups were lower compared to other groups. Weekly body weight of HH group was lower than other groups. CV values of body weight of thirteen groups were showed over 12% as 12.5~18.2%, and especially, those of 2B, 3B, 5B, HH groups were lower compared to other groups. Weekly feed conversion ratios (FCRs) of 13 crossbreds were 1.7~2.3, 2.1~2.5, 2.4~2.7 and 2.7~3.2 at the age of 6, 8, 10 and 12 weeks, respectively. Weekly production indexes of 2A, 3A and HH groups were the lower than other groups and those of thirteen groups decreased following weeks. Feed costs per body weight gain (kg) were 1,069~1,255 won, 1,100~1,263 won, and 1.468~1,696 won at starter, earlier and finished period of broilers. These results leaded down to conclusion to be possible selection of new Korean native commercial chicken that have the excellent performance and economics.

• Journal of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.20-24
• /
• 1964

The linear combination of bond orbitals method is used to investigate the reactivity of halomethanes in abstraction reactions by atoms. The activation energy is evaluated on the assumption that, in an activated complex, two electrons in a bond to be broken become completely isolated from the rest of the ${\sigma}$-electron systems. Such a model leads to an intuitively attractive concept that the interactions between the reactive bond and the neighboring bonds govern the reactivity of ${\sigma}$-electron systems. The resulting equation for the activation energy, ${\varepsilon},\;is:\;{\narepsilon}= ${\varepsilon}={\zeta}+$$${\sum}_{i=1}^3$${\eta}c-I,$ c-4 Here, subscript C-4 indicates the bond to be broken, while C-i represents the other three bonds surrounding the reactive bond; ξ is the activation energy of a hypothetical reaction of an isolated C-4 bond and an attacking atom; and ${\eta}$C-i,C-4 stems from the stabilizing interacting of C-4 bond with neighboring C-i bonds. A choie of η′s consistent with bond strength data simplifies the above equation to a form ${\varepsilon}={\zeta}\;+\;N{\eta}c$-H, C-4 where N denotes the number of C-H plus C-F bond in halomethanes. In agreement with this equation, experimental -values increase linearly with increasing N.

• Journal of Veterinary Clinics
• /
• v.20 no.1
• /
• pp.12-21
• /
• 2003

In this study, we evaluated effects of three anastomotic techniques of small intestine on adhesions in the dog. Twenty six healthy mixed dogs were randomly assigned to three groups. Group I(n = 8) was sutured with a simple continuous suture, group II(n = 7) was sutured with a simple interrupted approximating suture and group III(n = 11) was sutured with a single layer continuous Connell suture. On completion of any intestinal anastomosis, a pedicle of greater omentum was wrapped around the suture line in all experimental dogs. One percent sodium carboxymeth-ylcellulose (5ml/kg) was administrated into the abdomen by feeding tube prior to closing the last part of peritoneum in all dogs. Postoperative adhesions were evaluated at 14th day after operation. The adhesions consisted primarily in two dogs in group I, three dogs in group II and group III. There were adhesions between intestinal serosal surfaces in eight dogs in all groups, but there were no intestinal serosa-visceral peritoneum adhesion and intestinal serosa-mesentery adhesion. Mean adhesion scores were less than score 2 in all groups. Between anastomotic site and omental graft, there were 13.13$\pm$4.97 mm (mean$\pm$S.D.) adhesion formation in group I and 17.29$\pm$4.68 mm in group II and 14.64$\pm$3.80mm in group III. A simple continuous suture resulted in the least adhesion formation and a simple interrupted approximating suture resulted in the greatest adhesion formation among the groups. However, there were no significant differences among three suture techniques in the severity of adhesions. Intestinal intussusception only encountered in one dog during the 14 days, the dog operated and survived. Daily monitoring of temperature, activity, appetite, defecation and micturition were done. All of those vital signs were within normal values and there were no obvious differences among the groups. In conclusion, even though there were no significant differences among three groups, a simple continous suture pattern is recommended to prevent adhesions when operating intestinal anastomosis in dogs.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.522-532
• /
• 2010

The aims of the present study were to characterize the effect of glucocorticosteroids (GCs) on the normal canine skin and to evaluate the effect of a lipid mixture (LM), containing cholesterol, pseudoceramide, and free fatty acid, on the steroid-induced damaged skin of dogs. Five beagles were involved and the skin of the back of each dog was topically applied with four kinds of GCs twice daily for 28 days. LM was applied after that period of GCs application. Transepidermal water loss (TEWL), skin hydration, and skin pH were assessed during experimental periods and histopathological evaluation was performed. TEWL was significantly increased, with a maximum increase obtained on day 28 (p < 0.01). Skin pH was significantly decreased, with a maximum decrease obtained on day 28 (p < 0.01). Skin surface hydration was significantly increased on day 3, but values of skin hydration were progressively decreased and finally reached those of baseline. In histology, as results of steroid application, losses of keratin layers in the stratum corneum and edematous changes in the upper parts of dermis, and consequently, thickness of the epidermis and the stratum corneum were decreased. In addition, the numbers of hair follicles were markedly decreased in steroid control as compared to intact control. However, these skin atrophic changes were markedly inhibited by treatment of LM as compared with steroid control in the present study. Moreover, all biophysical parameters were reached to the baseline after LM treatment. These results showed that the topically applied GCs induced skin barrier impairment and a LM should be effective on repair of disturbed skin barrier function in dogs. Therefore, it is concluded that a LM tested in the present study is expected to treat the steroid-induced skin damages.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.228-233
• /
• 2012

This study was conducted to determine the effects of stevia (Stevia rebaudiana bertoni) and charcoal supplementation on growth performance, immune response and carcass characteristics of finishing pigs. A total of 420 pigs (LYD) were randomly allocated into 7 treatments with 3 replications. Dietary treatments were 1) T1 (basal diet), 2) T2 (basal diet+0.3% stevia), 3) T3 (basal diet+0.6% stevia), 4) T4 (basal diet+0.3% charcoal), 5) T5 (basal diet+0.6% charcoal), 6) T6 (basal diet+0.3% stevia+0.3% charcoal) and 7) T7 (basal diet+0.6% stevia+0.6% charcoal). During the experimental period, average daily gain (ADG) was higher in T2 and T6 groups than the other treatments (p<0.05). Feed conversion ratio (FCR) was higher in T6 group compared to the others (p<0.05). There were no significant differences in total cholesterol level and glutamic pyruvic transaminase (GPT) activity of blood among treatments. In glutamic oxaloacetic transaminase (GOT) activity, T3, T5, T6 and T7 groups showed lower values (p<0.05) compared to T1. Insulin-like growth factor-1 concentration was higher in T2 and T6 groups than the others (p<0.05), but there were no significant differences in immunoglobulin G, lymphocyte, eosinophil, basophil and atypical lymph levels among treatments. In neutrophil, T6 showed higher level compared to the others (p<0.05). In the carcass characteristics, T6 showed higher level of a carcass grade compared to the other treatments. However, carcass length did not show any significant difference among treatments. As a result, dietary supplementation of 0.3% stevia and 0.3% charcoal showed higher ADG, higher FCR and better immune response resulting in better growth performance and carcass characteristics of finishing pigs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.58-65
• /
• 2006

The possibility of applying a hi-axial flexure strength test on composite resin was examined using three point and hi-axial flexure strength tests to measure the strength of the light-cured resin and to compare the relative reliability using the Weibull modulus. The materials used in this study were light-curing restorative materials, $MICRONEW^{TM},\;RENEW^{(R)}$ (Bisco, Schaumburg, USA). The hi-axial flexure strength measurements used the piston-on-3-ball test according to the regulations of the International Organization for Standardization (ISO) 6872 and were divided into 6 groups, where the radius of the specimens were 12mm (radius connecting the 3-balls: 3.75mm), 16 mm(radius connecting the 3-balls: 5mm), and the thickness were 0.5mm, 1mm, 2mn for each radius. The hi-axial flexure strength of the $MICRONEW^{TM}\;and\;RENEW^{(R)}$ were higher than the three point flexure strength and the Weibull modulus value were also higher in all of the bi-axial flexure strength groups, indicating that the hi-axial strength test is relatively less affected by experimental error. In addition, the 2 mm thick specimens had the highest Weibull modulus values in the hi-axial flexure strength test, and the $MICRONEW^{TM}$ group showed no significant statistical difference (p>0.05). Besides the 2mm $MICRONEW^{TM}$ group, each group showed significant statistical differences (p<0.05) according to the thickness of the specimen and the radius connecting the 3-balls. The results indicate that for the 2mm group, the hi-axial flexure strength test is a more reliable testing method than the three point flexure strength test.