• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.69-74
• /
• 2003

The purpose of the present paper is to investigate about the machining of profile (core/cavity) of mold die using the commercial CAM system. Recently the requirement of the light weight and high performance of automobiles has Increased. The weight of the automobile is very important in the viewpoint of the fuel and traveling performance. The optimal design technique, material technique, the process design for parts and specially, die machining technique need to be developed for increasing productivity and reducing production time of the automobile parts. In this study, the effect of machining condition on precision of die profile is investigated by experimental observation and analysis. The results will be reflected for development of the precision die of the automobile.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.89-95
• /
• 1996

This paper describes a fuzzy controlled pre-chlorination technique for purifying the pulluted raw water in water purification lants. For the purpose of obtaining the high quality water, the appropriate pre-chlorine dosage rate has to be continuously adjusted according to a change in quality of a intake raw water, weather, solar nergy mount, temperature and etc. Therefore, the method of expressing an expert's empirical knowledge cumulated from his past carrier by fuzzy reasoning and the fuzzy controller design technique is necessary.In this paper fuzzy membership functions and rules accordingto emprircal knowledge and experimental field data were obtained, And also fuzzy cintriller design using four feedforward components for the determination of pre-chlorine dosage rate and four feedback ones for the compensation of its dosage rate with residual chlorine and its change rate, was executed.

• Tribology and Lubricants
• /
• 제40권1호
• /
• pp.1-7
• /
• 2024

Ball bearings are a major component of mechanical parts for transmitting rotation. Compared to tapered roller bearings, ball bearings offer less rolling resistance, which leads to reduced heat generation during operation. Because of these characteristics, ball bearings are widely used in electric vehicles and machine tools. The design of ball bearing cages has recently emerged as a major issue in ball bearing design. Cage design requires pre-verification of performance using theoretical or experimental formula or computational fluid dynamics (CFD). However, CFD analysis is time-consuming, making it difficult to apply in case studies for design decisions and is mainly used in performance prediction following design confirmation. To use CFD in the early stages of design, main-taining analytical accuracy while reducing the time required for analysis are necessary. Accordingly, this study proposes a laminar steady-state segment CFD technique to solve the problem of long CFD analytical times and to enable the use of CFD analysis in the early stages of design. To verify the reliability of the CFD analysis, a bearing drag torque test is performed, and the results are compared with the analytical results. The proposed laminar steady-state segment CFD technique is expected to be useful for case studies in bearing design, including cage design.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1596-1606
• /
• 2006

There has been more increased the development of 3D technique since many 3D contents of 3D graphic model, 3D mobile/computer game, and 3D CAD have been serviced in Web or industry fields. Therefore, the watermarking system is more required to protect the copyright for 3D contents. Currently there has been researched about the watermarking for 3D graphic model of mesh or NURBS. However, watermarking technique based on CAD design drawing leaves something to be desired yet. This paper proposed the watermarking technique for 3D CAD design drawing using Line and Arc components. After drawing out Line and Arc components from designed drawing, we embed the watermark into both the length of Line component and the radius of Arc component. Experimental results verified that the proposed algorithm satisfies the transparency about watermarked drawing and also has the robustness against several attacks by using public CAD tool.

• 로봇학회논문지
• /
• 제9권3호
• /
• pp.160-169
• /
• 2014

Odometry using wheel encoder is a common relative positioning technique for wheeled mobile robots. The major drawback of odometry is that the kinematic modeling errors are accumulated when the travel distance increases. Therefore, accurate calibration of odometry is required. In several related works, various schemes for odometry calibration are proposed. However, design guidelines of test tracks for odometry calibration were not considered. More accurate odometry calibration results can be achieved by using appropriate test track because the position and orientation errors after the test are affected by the test track. In this paper, we propose the design guidelines of test tracks for odometry calibration schemes using experimental heading errors. Numerical simulations and experiments clearly demonstrate that the proposed design guidelines result in more accurate calibration results.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.94-110
• /
• 1996

Two regression models for explaining the tire performances (especially conering coefficients) by tire design and experimental factors are built. One is the ordinary regression model, and the explaining variables in the model are selected by a stepwise method. The other model is built by a modern nonparametric regression technique, called projection pursuit regression. Then two models are compared and combined, so that the relationship between the tire performances and design factors are well figured out. The optimal experimental design issue and future research ideas are also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.43-45
• /
• 2004

This paper presents the optimal design of a brushless DC motor(BLDC) keeping the average torque and cogging torque of the initial model while minimizing the volume of magnet pole. Experimental design method and evolution strategy technique are performed for the shape optimization. The presented optimal designs show the both methods have the almost same result.

• 한국지능시스템학회논문지
• /
• 제12권1호
• /
• pp.80-84
• /
• 2002

본 논문은 2자유도 실험용 헬리콥터 시스템의 제어를 위한 분산 제어기 설계 기법을 제안한다. 분산제어기법은 특히 대규모 제어 시스템에 적합하다고 알려져 있다. 본 논문에서는 Lyapunov 안정도 설계 방법을 이용하여 상호 연결된 TS 퍼지 시스템의 안정도 조건을 유도하고 선형 행렬 부등식을 이용하여 제어기 설계 조건을 공식화한다. 제안된 방법의 유용성을 검증하기 위해, 컴퓨터 시뮬레이션뿐 만 아니라 실험을 통해 그 결과를 도출한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.485-488
• /
• 2000

In this paper dynamic analyses and control design of a step-down switched-capacitor dc-dc converter are presented. Open-loop dynamics of the converter are analyzed using the stage-space averaging technique. A systmatic control design method that offers excellent closed-loop performance for the converter is proposed, The analysis results and dynamic performance of the converter are verified using 18 W experimental converter that delivers a 5V/3.5V output from a 11-16V input source.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.192-195
• /
• 1997

The deformation of the rotating band is simulated to improve the original design of the rotating band. The improved designs are proposed by referring the result of the finite element analysis. A new experimental technique is proposed and its application has been carried out to show the validity of the result of the analysis and the performance of the improved design of the band.