• Journal of Animal Science and Technology
• /
• 제55권2호
• /
• pp.103-107
• /
• 2013

A crucial first step in the planning of any scientific experiment is to evaluate an appropriate sample size to permit sufficient statistical power to detect the desired effect. In this study, we investigated the optimal sample size of quantitative trait locus (QTL) linkage analysis for simple random sibship samples in pedigreed chicken populations, under the variance component framework implemented in the genetic power calculator program. Using the program, we could compute the statistical power required to achieve given sample sizes in variance component linkage analysis in random sibship data. For simplicity, an additive model was taken into account. Power calculations were performed to relate sample size to heritability attributable to a QTL. Under the various assumptions, comparative power curves indicated that the power to detect QTL with the variance component method is highly affected by a function of the effect size of QTL. Hence, more power can be achievable for QTL with a larger effect. In addition, a marked improvement in power could be obtained by increasing the sibship size. Thus, the use of chickens is advantageous regarding the sampling unit issue, since desirable sibship size can be easily obtained compared with other domestic species.

• 생약학회지
• /
• 제1권3호
• /
• pp.93-99
• /
• 1970

There have been reported by several workers for the isolation and determination of the amine derivatives as Metbylephedrine Hydrochloride and Ephedrine Hydrochloride adopting neutralization method, steam distillation method, non-aqous titration method, ion-exchange resin method, titration method after acetylation, colorimetric method, gravimetric method, iodine titration method and gas chromatography. Those methods mentioned in above, can be practically applied for the sample which is not mixed one mith the other amine compounds. Presently, it has not shown on the isolative determination of the mixed sample of amine derivatives. In this paper, it is discussed on the isolative determination of Methylephedrine Hydrochloride as the tertiary amine compound and Ephedrine Hydrochloride as the secondary amine compound. According to the results of the experiment, it could be summarized as follows: 1. There is no time-variation on the color reaction of Methylephedrine Hydrochloride and Ephedrine Hydrochloride with the color reagent, bromcresolgreen. And Methylephedrine Hydrochloride and Ephedrine Hydrochloride, respectively, can be determined spectrophotometrically by means oft his color reaction. 2. For the isolation of Methylephedrine Hydrochloride and Ephedrine Hydrochloride from the mixed sample, Methylephedrine Hydrochloride can be eluted by chloroform, while Ephedrine Hydrochloride by the mixed solvent of chloroform and ethylalcohol (2:1), from the celite column adsorbed at pH6.4 followed by extraction with ether undersodium hydroxide alkali re action. 3. When the sample is mixed with quinine hydrochloride, dihydrocodeine bitartate, and noscapine, these mixed compounds can be eliminated by means of stram distillation. 4. When the sample is mixed with chlorpheniramine maleate, dextromethorphan hydrobromide and diphenhydramine hydrochloride, the mixed compounds can be eliminated by means of steam distillation and celite adsorption column chromatography, In conclusion, the isolative determination method for Methylephedrine Hydrochloride and Ephedrine Hydrochloride studied in this paper, indicates with the excellent reproducibility and accuracy.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권9호
• /
• pp.1328-1335
• /
• 2014

Significant SNPs associated with Warner-Bratzler (WB) shear force and sensory traits were confirmed for Hanwoo beef (Korean cattle). A Bonferroni-corrected genome-wide significant association (p< $1.3{\times}10^{-6}$) was detected with only one single nucleotide polymorphism (SNP) on chromosome 5 for WB shear force. A slightly higher number of SNPs was significantly (p<0.001) associated with WB shear force than with other sensory traits. Further, 50, 25, 29, and 34 SNPs were significantly associated with WB shear force, tenderness, juiciness, and flavor likeness, respectively. The SNPs between p = 0.001 and p = 0.0001 thresholds explained 3% to 9% of the phenotypic variance, while the most significant SNPs accounted for 7% to 12% of the phenotypic variance. In conclusion, because WB shear force and sensory evaluation were moderately affected by a few loci and minimally affected by other loci, further studies are required by using a large sample size and high marker density.

• 응용통계연구
• /
• 제19권3호
• /
• pp.535-544
• /
• 2006

분산 성분 모형 하에서 분산 성분들의 함수에 대한 통계적인 추론, 특히 소표본 하에서의 신뢰구간에 대한 방법들은 오랜 기간에 걸쳐서 여러 가지 방법들이 개발되어져 왔다. 그 대표적인 방법이 Graybill and Wang(1980)에 의해 제안된 수정 대표본 방법에 의거한 신뢰구간 추정법이며 현재까지 다양한 실험계획 방법 하에서 분산 성분들의 여러 가지 형태의 함수들에 대하여 확장과 개량이 이루어져 왔다. 본 연구에서는 분산 성분 모형의 균형 실험 가정 하에서 분산 성분들의 선형 결합이 관심있는 모수일 때 분산 분석에 의해 얻어진 수정 대표본 신뢰구간의 실제 포함확률을 툴스트랩 보정을 이용하여 개선하는 방법에 대하여 논의한다. 붓스트랩 보정을 이용함으로서 신뢰구간의 포함 확률의 정도는 점근적 이차 차수까지 개선되며 특히 선형 결합의 계수들이 모두 양수이고 결합의 수가 증가할 경우 수정 대표본 신뢰구간의 포함확률이 주어진 신뢰계수보다 항상 커지게 되는 단점을 개선할 수 있음을 보인다. 제안된 붓스트랩 보정 신뢰구간의 효율을 소표본의 경우에 모의실험을 통하여 평가한다.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.32-36
• /
• 2002

이 연구는 돈분, 석고와 석탄화를 혼합물을 퇴비화한 것이다. 실험에 사용한 A 시료(PM : SD = 6 : 4)와 C 시료(PM : SD : GS : CFA = 6 : 2 : 1 : 1)를 사용하여 퇴비화 실험결과 A, C 시료의 초기 수분함량은 64, 50%이었고 온도, pH에서도 A시료와 비교했을 때 큰 차이는 없었으나 A,C 시료의 최종 TOC는 약 5550, 2900 mg/kg 이었다. 양이온 교환능은 A, C시료와는 크게 차이는 없었으나 CEC값으로 보아 숙성에 더 많은 시간이 필요할 것으로 생각된다. 그러나 석고와 석탄회 첨가는 돈분 퇴비화 과정에서 첨가제로서의 역할이 있음을 알 수 있었다.

• 설비공학논문집
• /
• 제28권5호
• /
• pp.208-215
• /
• 2016

This study was conducted to improve the performance of low-temperature vacuum dryer by applying desiccant to cold trap. Performance evaluation was carried out using several desiccants. The amounts of absorption and diffusivity were measured based on analytic model. Results of desiccant performance evaluation revealed that silica-gel had the most excellent performance for conditions of low-temperature vacuum drying process. Silica-gel was applied to cold trap for evaluating the drying performance. The experiment results showed that the drying time was extended as the thickness of sample was increased due to increased heat and mass transfer resistance of drying sample. In addition, as heating plate temperature was increased, drying time was decreased due to increased evaporation pressure of drying sample. Furthermore, drying time with desiccant was decreased approximately 20% than that without desiccant.

• Food Science and Biotechnology
• /
• 제14권2호
• /
• pp.238-241
• /
• 2005

Aroma-active compounds were evaluated from salt-fermented anchovy sauce by solid phase microextraction-gas chromatography-olfactometry (SPME-GC-O) based on sample dilution analysis (SDA). SPME extract from carboxen/polydimethylsiloxane (CAR/PDMS) fiber was the most similar to the original odor of salt-fermented anchovy sauce used for this experiment, followed by divinylbenzene/CAR/PDMS (DVB/CAR/PDMS) fiber. Because salt-fermented anchovy sauce contains 23% NaCl, NaCl concentration of diluent was considered when salt-fermented anchovy sauce was serially diluted. Linear relationship between GC response and sample concentration was observed when diluted with 23% NaCl solution, whereas not observed when diluted with deodorized distilled water. Eleven and 16 aroma-active compounds were detected by SPME-GC-O based on SDA using CAR/PDMS and DVB/CAR/PDMS fibers, respectively. Butanoic acid and 3-methyl butanoic acid showed the highest ${\log}_2SD$ factors for CAR/PDMS and DVB/CAR/PDMS fibers. Dimethyl trisulfide, methional, trimethyl amine, 1-penten-3-ol, and acetic acid were also detected as potent aroma-active compounds.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.57-74
• /
• 2009

Power signals resulting from spindle and feed motor, present a rich content of physical information, the appropriate analysis of which can lead to the clear identification of the nature of the tool wear. The partial least-squares regression (PLSR) method has been established as the tool wear analysis method for this purpose. Firstly, the results of the application of widely used techniques are given and their limitations of prior methods are delineated. Secondly, the application of PLSR is proposed. The singular value theory is used to noise reduction. According to grey relational degree analysis, sample variable is filtered as part sample variable and all sample variables as independent variables for modelling, and the tool wear is taken as dependent variable, thus PLSR model is built up through adapting to several experimental data of tool wear in different milling process. Finally, the prediction value of tool wear is compare with actual value, in order to test whether the model of the tool wear can adopt to new measuring data on the independent variable. In the new different cutting process, milling tool wear was predicted by the methods of PLSR and MLR (Multivariate Linear Regression) as well as BPNN (BP Neural Network) at the same time. Experimental results show that the methods can meet the needs of the engineering and PLSR is more suitable for monitoring tool wear.

• 약학회지
• /
• 제10권4호
• /
• pp.1-6
• /
• 1966

Various thiocyanatoammine chromium complex salts are prepared by the known methods and the Rf. value of these complex salts are determined by four developers. These four developers were used in the paper chromatographical work of cobalt complex salts by Yamamoto in 1954. It was also found that the developer A (Ch$_{3}$OH, acetone, NH$_{4}$OH) gave best results of these four developers and the decending development gave better results than ascending development in this experiment. In the case of decending development using developer A, it is found that the Rf. value is increased with the number of thiocyanate radical. The reason of this curious results can be explained that the thiocyanate radical in the complex ion is more active for the organic solvent than ammine radical. Shifting of electrons to the central metal and the charge of the complex ion can also effect ot the Rf. value but much questions are remained for the explanation of the above curious phenomenon. Separation of mixed sample is also studied for various mixture of the above complex salts. In the case of the mixture of hexammine and diammine complex salt, the clear separation is possible but in almost all other mixed sample, the results are not clear. Therefore it can be said that the results of this work can be used in the qualitative analysis of the individual complex salts, except the mixed sample of hexammine and diammine complex salts.

• 대한한의학회지
• /
• 제25권1호
• /
• pp.117-128
• /
• 2004

Objectives : This research was performed to investigate effect of Samul-tang-gamibang against focal cerebral ischemic damage after middle cerebral artery occlusion(MCAO). Methods : This research was used rats which were against focal cerebral ischemic damage by MCAO. It was used Zea Longa's theory and Belayev's methods to give rise to focal cerebral ischemic damage by MCAO. After 7days later, we drew out the brain and then had frozen and dyeing it and we had taken a picture to measure of the damaged area in each brain section. We determined the Neurological Index and tested the Foot-fault test and Roatated test to appraise the fall of motion ability result from cerebral ischemic damage. Results : The results of the experiment are as follows. 1. Samul-tang-gamibang reduced infarct size of sample group compared to control group at 7 day after MCAO. 2. Samul-tang-gamibang reduced infarct volume of sample group compared to control group at 7 day after MCAO. 3. Samul-tang-gamibang reduced foot-fault index of sample group compared to control group at 5,7 day after MCAO. Conclusions : Samul-tang-gamibang has protective effects against ischemic brain damage and had significant reduced infarct size and infarct volume of Rt-MCAO.