• Journal of the Korean Applied Science and Technology
• /
• v.7 no.2
• /
• pp.83-90
• /
• 1990

This study was attempted to observe the effect of Job's tear diet on change of body weight and tissue in rat. The changes of body weight were higher in Job's tear non-diet group(A) and seemed to lower in Job's tear diet group(c) as expected. The weight of each organ appeared to heavy more C group than A,Bgroup in Brain, Spleen. Lungs and Kidney. Liver was heavier in Job's tear to diet one day among six day group(B) and ovary was lighter in C group, The levels of each organ TBA-value were higher in Brain, Liver of A group and showed to higher Spleen, Lungs, Ovary of C group TBA-value of Kidney was revealed to lower more C group than A,B group.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.539-556
• /
• 2004

In this paper, the design, fabrication and characterization of a piezoelectric friction damper are presented. It was sized with the proposed practical procedure to minimize the story drift and floor acceleration of an existing 1/4-scale, three-story frame structure under both near-fault and far-field earthquakes. The design operation friction force in kip was numerically determined to range from 2.2 to 3.3 times the value of the peak ground acceleration in g (gravitational acceleration). Experimental results indicated that the load-displacement loop of the damper is nearly rectangular in shape and independent of the excitation frequency. The coefficient of friction of the damper is approximately 0.85 when the clamping force on the damper is above 400 lbs. It was found that the friction force variation of the damper generated by piezoelectric actuators with 1000 Volts is approximately 90% of the expected value. The properties of the damper are insensitive to its ambient temperature and remain almost the same after being tested for more than 12,000 cycles.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.880-883
• /
• 2003

The objective of this study was to measure performance of young broiler chickens fed three varieties of high-oil corn (HOC 1, 2, and 3) compared with eight varieties of normal corn (NC). HOC varieties contained about 80% more oil than NC (average crude fat; 6.71% vs 3.72%) and about 29% more protein (average CP; 9.54% vs 7.38%). Each experimental diet was formulated with the same amount (55.205%) of each corn hybrid. Experiment 1 had by six dietary treatments (HOC1 and five NC varieties, 360 chickens) and Experiment 2 had five treatments (HOC2, HOC3, and three NC varieties, 250 chickens). In Exp. 1, for feed efficiency (F/G), the treatment contained HOC1 had better performance (p<0.05) than other NC varieties except NC5. As expected, there was no significant difference in average daily feed intake (p>0.05) among dietary treatments. The dietary treatment of HOC1 gave an improvement of 4.3% in F/G that came from 6% higher gross energy (GE) value of HOC1. Compared with Exp. 2, the dietary treatments contained HOC hybrids gave 4.4% higher F/G than NC dietary treatments, which came from a 5% increase in GE value. HOC varieties had superior nutrients content to NC for poultry, due to the fact that HOC contained higher concentrations of energy, protein, lysine, and methionine, thus improving growth and F/G.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.633-637
• /
• 2007

Genetic variation in Nilagiri sheep, the only apparel wool breed in South India was studied using 25 FAO recommended ovine-specific microsatellite markers. The number of observed alleles ranged from 3 to 8 with a mean of 5 across all loci. The size of alleles ranged from 72 to 228 bp. The frequency of alleles ranged from 0.0104 to 0.5781. In total, 125 alleles were observed at the 25 loci studied. The effective number of alleles ranged from 2.18 to 6.49. The mean number of effective alleles was 3.84 across all loci. All the 25 loci were found to be highly polymorphic. The PIC values ranged from 0.4587 to 0.8277 with a mean of 0.6485. Of 25 microsatellites studied, 17 were in Hardy-Weinberg Equilibrium proportions. The observed heterozygosity ranged from 0.4222 to 1.000 with a mean value of 0.7610 whereas the expected heterozygosity ranged from 0.5415 to 0.8459 with a mean value of 0.7213. Except six loci, the other loci revealed negative within-population inbreeding estimates (FIS) indicating excess of heterozygotes in the population of Nilagiri sheep.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.1
• /
• pp.35-41
• /
• 2003

To ensure resource adequacy in restructured electricity markets, policymakers have adopted installed capacity (ICAP) markets in some regions of the United States. These markets ensure that adequate generation exists to satisfy regional Loss of Load Probability(LOLP) criterion. Since the incentives created through ICAP mechanisms directly impact new generation and transmission investment decisions we examine one important factor that links ICAP markets with LOLP calculations;, determining the amount of ICAP credit assigned to particular generation units. First, we review and critique the literature on electric power systems' market failure resulting from demand exceeding supply. We then summarize the method of computing (the LOLP) as a means of assessing reliability and relate this method to ICAP markets. We find that only the expected value of available generation is used In current ICAP markets while ignoring the second and higher order moments, which tends to mis-state the ICAP value of a specific resource. We then consider a proposal whose purpose is to avoid this ICAP assignment issue by switching from ICAP obligations to options. We find that such a proposal may fail to not provide the benefits claimed and suffers from several practical difficulties. Finally, we conclude with some policy recommendations and areas for future research.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.97-102
• /
• 1998

In the most cases of eigen value problems in the social sciences, the object matrix to analyze is real-valued symmetric matrix. And many cases of eigen value problems in this field needs 2-4 eigen pairs according to the magnitude of their absolute values. The methods to obtain eigen pairs by numerical computation using computer, we would face the problem of round off error because matrix computation needs a number of calculations. In this paper, an algorithm which make us to get some needed eigcn pairs according to the magnitude of their absolute values is designed. And in this algorithm, the power method is used to obtain some eigen pairs. This algorithm is expected to be effective by the reduction of the number of calculations.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.57-67
• /
• 2003

This study aims to presents Evaluation Method of Green Remodeling that analyze the value of environment through expense, using the method of life cycle cost and life cycle assessment simultaneously. The results of this study are summarized as follows. Evaluation Model developed in this study can convert economical value of environment into cost by integrating. In addition, the model can apply as a useful tool to estimation of economical design alternative as well as quantification of environmental loads and costs. Evaluation Model presented In this study observe energy consumption and the environmental load emission with qualification, it can forecast effect of environmental cost that cost estimation is expected to be added to energy cost rate by being possible. Synthetically, when Estimation Model and computer program that developed in this study is applies to the construction industry; reasonable management of environmental load is convenient at each step of Green Remodeling. In addition, at preliminary design phase, practical use may be possible by reasonable yardstick about various alternatives and improvement of design alternatives likewise by grasping environmental effect.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.95-100
• /
• 2011

Currently, office buildings in Korea tend to adopt as their outer wall the curtain wall structure which can be easily constructed and has beautiful external appearance as well. However, the problem is that the curtain wall structure does not have a uniform composition unlike the wall of existing reinforced concrete structures and has a frame made of metal with high heat conduction. Therefore, it is expected that the structure will be highly influenced by the thermal bridge. Thereupon, this study analyzes how to set up the composition of the wall system and heat transmission rate in consideration of the thermal characteristics of the curtain wall structure and applies it in practice by simulation in order to propose a guideline for the energy simulation method of the curtain wall structure and analyze its differences from existing simulation methods.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.40-55
• /
• 1991

To investigate the influence of cross section geometries on the behavior of composite beams in the case of small span to depth ratio and deep beams. the static flexural behavior of composite I-beams and Box- beams was evaluated. 12 types of composite I -beams composed of LVL flanges and particleboard or plywood web and 3 types of composite Box-beams composed of LVL flanges and plywood web were tested under one-point loading. The load-deflection curves were almost linear to failure, therefore, the behavior of tested composite beams was elastic. The theoretical flexural rigidity of composite beams was calculated and compared with observed flexural rigidity. The highest value was found in I-W type beams and the lowest value was found in G-P type beams. The difference between theoretical and observed flexural rigidity was small. Theoretical total deflection of tested composite beams was calculated using flexural rigidity and compared with actual deflection. Shear deflection of these beams was evaluated by the approximation method, solid crosss section method and elementary method. The difference between actual deflection and expected deflection was not found in D, E and F type beams. This defference was small in G, H and I type beams or Box-beam.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.551-558
• /
• 2007

From the view point of biological wastewater treatment, C/N ratio is one of the most important factor in biological nutrient removal process. However, municipal sewage in Korea is characterized by extremely low content of carbon source and relatively higher portion of N source. Accordingly, it is necessary to dose external carbon source in order to obtain higher degree of carbon source within the process. In this study, the effects of pH pretreatment as an alternative plan for increasing carbon source on the cell disruption and COD solubility of waste activated sludge were conducted under well defined experimental conditions. During 5 hours, the value of COD solubilization rate ($S_R$) at pH 11.5 is approximately 4.4 times higher than the value of $S_R$ at pH 9.5. It is expected that the level of SCOD increased due to the result from cell disruption. However, VSS/TSS ratio was not significantly changed after 5 hours. As Alkalinity changes gradually from less than 15, 30 and 60 meq NaOH/L, average RBCOD/SCOD fraction showed 34, 36 and 45%,respectively.