• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.3
• /
• pp.111-119
• /
• 1997

In this study, feasibility of expansion of BFL equivalence ratio are examined with change of injection location of hydrogen gas in intake pipe, coolant temperature, spark timing and amount of residual gas. As the results, BFL equivalence ratio is increased when injection location has some distance from intake valve. And it is decreased in accordance with increasing of coolant temperature and advance of spark timing. The amount of residual gas has little effect on BFL equivalence ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.94-102
• /
• 1999

Ni/CGO cermets were fabricated as the anode for SOFC which uses CGO as the electrolyte. And their electrical conductivity, electrochemical reactivity, and thermal expansion coefficient were optimized through the variation of NiO/CGO particle size ration and their composition. The electrical conductivity of the cermet was increased abruptly at a certain Ni content and the percolation concentration was decreased with the decreasing particle size ratio. Anodic overpotential was also decreased with the decreasing particle size ratio. For a fixed ratio it showed a minimum value at 50 wt.%. Thermal expansion coefficient was increased monotonically with increasing Ni contents, however it did not depend on the size ratio. With three properties taken into account, the cermet of particle size ration of 0.03 and composition of 50 wt.% was judged to be optimal as the anode.

• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.243-249
• /
• 2012

Biomass expansion factors, which convert timber volume (or dry weight) to biomass, are used for estimating the forest biomass and accounting for the carbon budget at a regional or national scale. We estimated the biomass conversion and expansion factors (BCEF), biomass expansion factors (BEF), root to shoot ratio (R), and ecosystem biomass expansion factor (EBEF) for Quercus mongolica Fisch. and Quercus variabilis Bl. forests based on publications in Korea. The mean BCEF, BEF, and R for Q. mongolica was 1.0383 Mg/$m^3$ (N = 27; standard deviation [SD], 0.5515), 1.3572 (N = 27; SD, 0.1355), and 0.2017 (N = 32; SD, 0.0447), respectively. The mean BCEF, BEF, and R for Q. variabilis was 0.7164 Mg/$m^3$ (N = 17; SD, 0.3232), 1.2464 (N = 17; SD, 0.0823), and 0.1660 (N = 8; SD, 0.0632), respectively. The mean EBEF, as a simple method for estimating the ground vegetation biomass, was 1.0216 (N = 7; SD, 0.0232) for Q. mongolica forest ecosystems, and 1.0496 (N = 8; SD, 0.0725) for Q. variabilis forest ecosystems. The biomass expansion factor values in this study may be better estimates of forest biomass in Q. mongolica or Q. variabilis forests of Korea compared with the default values given by the Intergovernmental Panel on Climate Change (IPCC).

• KDI Journal of Economic Policy
• /
• v.42 no.1
• /
• pp.31-56
• /
• 2020

Does financial development contribute to economic growth? The literature finds that an expansion in financial resources is useful for economic growth if the degree of financial development is under a certain threshold; otherwise, the expansion is detrimental to growth. Almost every published study, however, considers country-panel data. Accordingly, the results are not directly applicable to the Korean economy. By examining Korean time-series data, this paper finds that there is an inverse U-shaped relationship between the per capita real GDP growth rate and private credit (as a percentage of nominal GDP)-a well-known measure of quantitative financial development, where the threshold is 171.5%. This paper also finds that private credit is positively associated with economic growth if the share of household credit out of private credit is less than 46.9%; otherwise, private credit is negatively associated with economic growth. As of 2016, the ratio of private credit to GDP and the ratio of household credit to private credit are both higher than the corresponding thresholds, which implies that policymakers should place more emphasis on qualitative financial development than on a quantitative expansion of financial resources.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.574-579
• /
• 2005

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.283-288
• /
• 1999

This study is performed to evaluate slump , air content, compressive strength and length change ratio of non-shrinkage high strength ocncrete is achieved by 10% expansive additive contained. The length change ration of non-shrinkage high strength concrete which is in water curing, shows 0.055% expansion in 10% expansive additive contained concrete and 0.308 expansion in 20% expansion additive contained concrete when it is curing 28 days.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.1-11
• /
• 2004

In order to recognize thermal efficiency and power improvement in case that diesel cycle is turned into diesel-atkinson cycle, the fuel-air diesel-atkinson cycle considered gas exchange process is analyzed non-dimensionally and thermodynamically. As a result, in case of diesel-atkinson cycle, as expansion ratio is increased, thermal efficiency and mean effective pressure is increased and it has maximum value at Rec=1. When diesel cycle is turned into diesel-atkinson cycle by late intake valve closing timing, thermal efficiency and power is decreased because of the decline of effective compression ratio and intake airflow, but it could be compensated by increase of compression ratio or super-charged. In case compression ratio is compensated, Rec appears 1 around 100$^{\circ}$ ABDC, and it is expected that thermal efficiency is enhanced by 14.3% compared with conventional diesel cycle. In case compression ratio and intake airflow are compensated simultaneously, super-charged pressure is demanded 2.06bar at Rec=1 and it is more efficient when only compression ratio is compensated in the view point of thermal efficiency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.1 s.232
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.262-268
• /
• 2011

The effects of pellet moisture content on physical properties (expansion ratio, density and breaking strength) of vacuum-puffed Yukwa (non-oil puffed Yukwa) were investigated in this study. The Yukwa was made from the waxy rice steeped at 25 and $30^{\circ}C$ for 3, 5 and 10 days with pellet drying times (6, 8 and 10.5 hr). As the drying time increased from 6 to 10.5 hr at $50^{\circ}C$, the highest value of pellet moisture content (29.4%) was found in the samples made from the steeped waxy rice at $25^{\circ}C$ for 5 days after 6 hr drying, while the lowest value (16.3%) was found at $25^{\circ}C$ for 3 days after 10.5 hr drying. Both redness and yellowness values of vacuum-puffed Yukwa increased as the drying time increased. The expansion ratio of Yukwa was greatly affected by drying time, ranging from 2.07 (26.8% pellet moisture content) to 7.01 (24.0% pellet moisture content). From the data, it can be concluded that the pellet moisture content had a significant influence on the physical characteristics of vacuum-puffed Yukwa. With vacuum puffing condition of 3 min heating and 2 min puffing, the pellets with about 25% moisture content showed higher expansion ratio, and lower density and breaking strength.

• Journal of Korea Multimedia Society
• /
• v.17 no.7
• /
• pp.849-857
• /
• 2014

In this paper, we propose a (2,2)-reversible secret image sharing scheme using histogram shifting and difference expansion. Two techniques are widely used in information hiding. Advantages of them are the low distortion between cover and stego images, and high embedding capacity. In secret image sharing procedure, unlike Shamir's secret sharing, a histogram generate that the difference value between the original image and copy image is computed by difference expansion. And then, the secret image is embedded into original and copy images by using histogram shifting. Lastly, two generated shadow images are distributed to each participant by the dealer. In the experimental results, we measure a capacity of a secret image and a distortion ratio between original image and shadow image. The results show that the embedding capacity and image distortion ratio of the proposed scheme are superior to the previous schemes.