• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.54-59
• /
• 2008

Hydrated sodium silicate with 25 wt% water contents was synthesized by hydrothermal reaction using anhydrous sodium silicate. The hydrated sodium silicate was expanded at $370^{\circ}C$ for 30 min. and then pulverized, classified (- 200 mesh) and press-formed. The samples were heat treated at $400{\sim}900^{\circ}C$ for 30 min. in order to study the expansion characteristics depending on heat treatment temperature. A porous body with closed pore was formed above $600^{\circ}C$. The volume expansion ratio and the pore size were increased and the specific gravity was decreased with increasing heat treatment temperature. However, the volume expansion ratio was decreased and the specific gravity was increased above $850^{\circ}C$ due to the softening of the sodium silicate.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.38-47
• /
• 2000

Characteristics of the interface between tube and tube sheet which were formed by explosive expansion and roll expansion, have been studied in the research. The results are as follows: Optimum amounts of explosives for the expansion of Alloy 600 (19.05mm and 15.88mm) were found to be RDX 3.5-8.5g/m. Because explosive expansion caused les strain hardening and increased bounding strength, characteristics of the explosively expanded were better than those of mechanically expanded. As the transition region of the explosive expansion is inactive, the resistance to the stress corrosion cracking increases by 30∼40% compared to the roll and hydraulic expansion.

• 아태비즈니스연구
• /
• 제9권1호
• /
• pp.57-76
• /
• 2018

This paper studies the influence of the bilateral expansion of Korean and Chinese banks on performance. To conduct the empirical analysis, we select eleven Banks in South Korea and thirteen Banks in China over the 2000-2014 time frame. The main regression results are as followed. First, the sample bank's overseas subsidiaries have a significant effect on profitability and the profitability is somewhat deteriorates. Second, the sample bank's overseas branch and subsidiaries have a significant effect on the bank's risk. That is, the loan loss provision ratio is slightly increased but impaired loan ratio is highly decreased. Third, the sample banks' overseas branch and subsidiaries also have a significant effect on bank efficiency. The ratio of customer deposits per employee worsens somewhat but the gross loan per employee are increased. In conclusion, as time passes, bank profitability or efficiency from mutual expansion of Korean banks and Chinese banks seem to be improving somewhat, and this phenomenon is more prominent at Korean banks than at Chinese banks.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.205-206
• /
• 2022

This study intends to conduct tests on subsidence and drying shrinkage by mixing CaO-CSA expansion materials to ensure the stability of CLC, and to understand its properties. Based on CLC of 0.6, the replacement ratio of CaO-CSA expansion material was conducted at five levels compared to blast furnace slag, and the results are as follows. The replacement of CaO-CSA expansion material at an appropriate level produces ethringhite and potassium hydroxide, and it is believed that the internal voids of CLC and the Tobelmorite interlayer structure are charged to increase the structural stability, leading to an increase in compressive strength and a decrease in the drying shrinkage. However, it is judged that tissue relaxation due to excessive substances in the high replacement ratio affects the stability of CLC. In the future, we will conduct additional experiments on density, absorption rate, flow test, and settlement, and evaluate and analyze the stability of CLC by selecting the optimal replacement ratio of CaO-CSA expansion materials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.275-276
• /
• 2010

본 연구에서는 MgO를 혼입한 콘크리트의 자기팽창 실험결과를 이용하여 물-결합재 비, MgO 첨가량, 양생온도 등의 영향인자를 고려한 자기팽창 모델을 제안하였으며, 모델 예측 결과가 실험 결과를 잘 일치하는 것을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.337-340
• /
• 2008

The gate expansion was planed to increase discharge capacity of gate structure at sea dike in Asan Bay. So it was estimated for changing of hydraulic states in Pyeongteak Harbor Zone caused by gate expansion, by 2D and 3D CFD Module. In result, influence of gate expansion was less than tidal current and discharge ratio between old gate and new gate was 4:6.

• 에너지공학
• /
• 제21권4호
• /
• pp.411-418
• /
• 2012

본 연구에서는 가솔린 엔진 자동차의 엔진 폐열 회수를 위한 이중 회로 랭킨 사이클 시스템에서 용적형 팽창기의 설계 팽창비에 따른 성능 해석이 수행되었다. 자동차 엔진 폐열 이용 랭킨 사이클 시스템에 사용되는 용적형 팽창기는 운전 조건에 따라 설계 팽창비가 운전 압력비보다 낮은 저팽창 조건과 설계 팽창비가 운전 압력비보다 높은 과팽창 조건으로 운전되므로 탈설계 조건에서 성능 예측이 중요하다. 또한 용적형 팽창기는 자동차 적용시 팽창효율 뿐만 아니라 부피와 무게를 최소화하는 것이 매우 중요하므로 이를 고려한 설계 팽창비의 최적화가 요구된다. 본 연구에서는 용적형 팽창기의 탈설계 조건에서 성능 예측을 통해 팽창효율과 팽창기의 용적을 동시에 고려하여 설계 팽창비를 목표 운전 압력비보다 낮도록 하여 저팽창 운전을 하도록 설계 하는 것이 유리함을 제시하였다.

• 공학논문집
• /
• 제6권2호
• /
• pp.141-151
• /
• 2004

금합금계 매몰재 재료의 물리적 특성은 각각 열팽창계수과 압축강도, 입도 분포에 크게 좌우된다. 일반적으로 금합금계 매몰재는 cristobalite와 quartz, plaster로 주성분을 구성하고 있다. 그리고 cristobalite와 quartz의 열팽창계수는 $2.6\times10^{-6}/^\circC$, $2.32\times10^{-6}/^\circC$, 로 이 두 재료의 혼합비가 매몰재의 열팽창 계수를 변화시키는 매우 중요한 역할을 하고 있다. 현재 국내에서는 금합금계 매몰재는 전량 수입에 의존하고 있고 그 시장 수요 또한 대단히 크다. 따라서 균일한 입도 분포를 가지는 cristobalite와 quartz의 개발과 주조금속의 열팽창과 냉각에 따른 수축력을 고려한 열팽창계수를 가지면서 매몰재의 요구강도에 적합한 압축강도를 가지는 금합금계 매몰재의 개발이 필수적이다. 따라서 본 연구에서는 먼저 균일한 입도를 갖는 cristobalite와 quartz 분체의 제조와 cristobalite와 quartz의 혼합비에 따른 열팽창계수와 압축강도를 비교 분석하였다. 본 연구의 결과로 표면이 매끄럽고 균일한 입도 분포를 갖는 cristobalite와 quartz를 제조하였으며, cristobalite와 quartz의 혼합비가 45:25가 열팽창계수와 압축강도에서 매몰재가 요구하는 조건을 만족하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• 폴리머
• /
• 제31권3호
• /
• pp.206-214
• /
• 2007

3차원적 타원체 형태 ($a_1>a_2>a_3$)를 사용하여, 2가지의 종횡비 (1차 종횡비 $\rho_{\alpha}$와 2차 종횡비 $\rho_{\beta}$)를 갖는 배열된 3차원 형태의 충전제를 포함하는 복합체의 열팽창 변화를 이론적으로 예측하는 모델을 연구하였다. Eshelby의 등가 텐서를 이용하여 배열된 타원형 충전제를 기지재의 이론에 의해 열팽창 계수를 예측할 수 있었다. 종단방향 열팽창 계수 ${\alpha}_{11}$는 두 가지 종횡비 모두 증가하면, 감소하여 충전제의 열팽창에 접근한다. 수직방향 열팽창 계수 ${\alpha}_{33}$는 충전제 함유량에 따라 초기에는 증가하여 최대값을 갖는 경향을 보인다. 1차 종횡비 $\rho_{\alpha}$가 증가하면, 횡단방향 열팽창 계수는 감소하나, 2차 종횡비 $\rho_{\beta}$가 증가하면, 같이 증가한다. 또한, 수직방향 열팽창 계수 ${\alpha}_{33}$는 $\rho_{\alpha}$가 증가하면 증가하나, $\rho_{\beta}$가 증가하면, ${\alpha}_{33}$는 반대로 감소한다.