• 제목/요약/키워드: Expanded polystyrene

검색결과 116건 처리시간 0.028초

수축저감제로서 발포 폴리스티렌 폐기물을 이용한 폴리머 모르터의 기초적 성질에 관한 연구 (A Study on the Properties of Polymer Mortar Using Waste Expanded Polystyrene as a Shrinkage-Reducing Agent)

  • 최낙운;김완기;조영국;소승영;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.362-367
    • /
    • 1998
  • The purpose of this study is to examine the influences of polystyrene content and St/UP on the setting shrinkage and strengths of polymer mortar with waste expanded polystyrene resin as a shrinkage-reducing agent, and to recommend the optimum binder formulations for product of low-shrinkage polymer mortar. In this paper, polymer mortar is prepared with waste expanded polystyrene content and St/UP, and tested for setting shrinkage, flexural and compressive strengths. From the test results, irrespective of increasing of waste expanded polystyrene resin, the strengths reduction of polymer mortar with waste expanded polystyrene(EPS) resin is not recognized. And the setting shrinkage is reduced with EPS resin content. The waste expanded polystyrene resin as a shrinkage-reducing agent can be used in the same manner as commercial polystyrene resin. In this study, we can obtain the optimum mix proportions of polymer mortar using EPS resin.

  • PDF

알루미늄 호일 부착 발포 폴리스티렌 단열재의 열전도율, 열방출시험 및 가스 유해성 시험 (Heat Transfer Coefficient, Heat Release and Gas Hazard Tests for Expanded Polystyrene Heat Insulating Materials with Aluminum Foil)

  • 공하성
    • 대한안전경영과학회지
    • /
    • 제20권4호
    • /
    • pp.15-19
    • /
    • 2018
  • The purpose of this study is to enhance heat insulation effect and to decrease fire hazard by attaching aluminum foil to expanded polystyrene, which is mainly used for insulating materials, to have fire retardant. The result of the test confirmed that the insulating materials, expanded polystyrene of $10kg/m^3$ and $14kg/m^3$ of density attached aluminum foil on both sides, showed 12%, 14% of improved heat transfer coefficient respectively compared to existing expanded polystyrene of the same density. Besides, they met all the standards for the testing of heat release and gas hazard. On the other hand, the one made of general expanded polystyrene could not meet the standards of the heat release test and the gas hazard test.

폐 발포폴리스티렌과 발포폴리스티렌 비드를 활용한 경량 모르타르의 특성 (Characteristic of Light Weight Mortar using Waste Expanded Polystyrene and Expanded Polystyrene Beads)

  • 강석표;황병일
    • 한국건축시공학회지
    • /
    • 제17권5호
    • /
    • pp.393-401
    • /
    • 2017
  • 본 논문에서는 발포폴리스티렌 비드 (EPB)와 폐 발포폴리스티렌 (WEP)의 대체율에 따른 경량 모르타르의 기초 특성을 평가였다. EPB 및 WEP를 이용한 경량 모르타르의 기초 특성으로서 단위용적중량, 압축 강도, 휨강도, 흡수율, 열전도율 및 폴리스티렌 (EPB 및 WEP) 분포를 분석하였다. 그 결과 경량 모르타르는 WEP의 대체율이 증가할수록 단위용적중량, 압축 강도, 휨강도, 흡수율 및 열전도율은 증가하고, 폴리스틸렌 면적 분포는 감소하였다.

폐발포폴리스티렌을 활용한 경량단열모르타르의 열전도율 및 역학적 특성 (Mechanical and Conductivity Characteristic of Lightweight Insulation Mortar Using Wasted Foam Polystyrene)

  • 강혜주;황병일;진은미;강석표
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.250-251
    • /
    • 2017
  • In study, the lightweight insulation mortar is produced with more than 50,000tons of waste each year, but it is difficult to treat with the degradable composite material and the recycling ratio is still 50%. the lightweight insulation mortar is manufactured by using the ratio of expanded polystyrene and pulverized expanded polystyrene.

  • PDF

Subacute Oral Toxicity Evaluation of Expanded-Polystyrene-Fed Tenebrio molitor Larvae (Yellow Mealworm) Powder in Sprague-Dawley Rats

  • Choi, Eun-Young;Lee, Jae-Han;Han, So-Hee;Jung, Gi-Hwan;Han, Eun-Ji;Jeon, Su-Ji;Jung, Soo-Hyun;Park, Jong-Uk;Park, Ji-Hoon;Bae, Yoon-Ju;Park, Eun-Soo;Jung, Ji-Youn
    • 한국축산식품학회지
    • /
    • 제42권4호
    • /
    • pp.609-624
    • /
    • 2022
  • Tenebrio molitor larvae, as known as edible insects, has advantages of being rich in protein, and has been recognized as a suitable alternate protein source for broiler and pig feed. Moreover, given their ability to biodegrade polystyrene, a major pollutant, Tenebrio molitor larvae has been proposed as an innovative solution to environmental problems. In the present study, we investigated the toxicity of Tenebrio molitor larvae powder (TMlp) ingested with expanded-polystyrene (W/ eps) through in vitro and in vivo experiments. The objective of this study was to determine whether TMlp W/ eps can be applied as livestock alternative protein source. For in vitro experiments, cytotoxicity test was performed to investigate the effects of TMlp-extract on the viability of estrogen-dependent MCF-7 cells. The possibility of estrogen response was investigated in two groups: Expanded-polystyrene-fed (W/ eps) TMlp group and without expanded-polystyrene-fed (W/o eps) TMlp group. For in vivo experiments, The male Sprague-Dawley rats were divided based on the dosage of TMlp administered and oral administration was performed to every day for 5 weeks. A toxicological assessments were performed, which included clinical signs, food consumption, body and organ weights, hematology, serum chemistry, and hematoxylin and eosin staining of liver and kidney. There were no specific adverse effect of TMlp W/ eps-related findings under the experimental conditions of this study, but further studies on both sexes and animal species differences should be investigated. In conclusion, TMlp W/ eps was considered non-toxic and observed to be applicable as an alternative protein source for livestock feed.

Study on Photodegradable Water-Soluble Compounds of Expanded Polystyrene

  • Lee, Seulgidaun;Kim, Sunghwan
    • Mass Spectrometry Letters
    • /
    • 제12권3호
    • /
    • pp.118-124
    • /
    • 2021
  • Many previous studies have focused on revealing the harmfulness of microplastic particles, whereas very few studies have focused on the effects of chemicals, particularly photooxidation product. In this study, products of photodegradation from expanded polystyrene (EPS), compounds produced by photolysis by ultraviolet (UV) light, were investigated. EPS was directly irradiated and photolyzed using a UV lamp, and then the extracted sample was analyzed using high-resolution mass spectrometry (HRMS). Multiple ionization techniques, including electrospray ionization, atmospheric pressure chemical ionization, and atmospheric pressure photoionization, were used. In total, >300 compounds were observed, among which polystyrene monomer, dimer, and oxidized products were observed. In this work, the data presented clearly demonstrate that it is necessary to identify and monitor oxidized plastic compounds and assess their effect on the environment.

발포 EPP/EPS의 충격특성에 관한 실험적 연구 (Experimental Study for the Impact Characteristics of Expanded EPP/EPS Foams)

  • 김한국;김병준;정광영;전성식
    • Composites Research
    • /
    • 제26권6호
    • /
    • pp.343-348
    • /
    • 2013
  • 본 연구에서는 발포 폴리프로필렌(Expanded polypropylene)과 발포 폴리스티렌(Expanded polystyrene)의 준정적 시험(Quasi-static test) 및 계장화 충격 시험(Instrumented impact test)을 수행하였다. EPP와 EPS는 4가지의 다른 밀도에 대해 원통형 시편이 준비되었다. 준정적 시험에는 MTS 858을 사용하여 0.001 $s^{-1}$과 0.1 $s^{-1}$ 두 가지 변형률속도 조건으로 진행되어 결과를 분석하였다. 계장화 충격 시험에서는 Instron dynatup 9250HV를 사용하여, 각각 100 J, 200 J, 300 J의 서로 다른 충격에너지를 가했을 때의 응력-변형률 선도 결과를 비교 분석하였다.

폴리스티렌을 이용한 전기투석용 양이온교환 막의 제조 및 그 특성에 관한 연구 (A Study on the Characteristics and Preparation of the Cation Exchange Membrane Using Various Type of Polystyrene)

  • 김희열;김종화;박근호;송주영
    • Korean Chemical Engineering Research
    • /
    • 제44권4호
    • /
    • pp.340-344
    • /
    • 2006
  • 폴리스티렌을 acetyl sulfate 시약을 사용하여 술폰화시킨 후 다공성 양이온교환 막으로 제조하였다. 제조된 막의 특성을 분석한 결과 다공성의 형태를 가졌음을 확인할 수 있었고, IR 분석결과 술폰산기의 도입을 확인할 수 있었다. 전체적으로 반응물 중 황산의 양이 증가할수록 이온교환능력이 증가하는 경향을 확인할 수 있었고, 전기투석 공정에 적용가능성을 판단한 결과 양이온에 대한 선택성과 음이온에 대한 배제성을 간접적으로 확인할 수 있었다.

Flexural Behavior of Polymer Mortar Permanent Forms Using Methyl Methacrylate Solution of Waste Expanded Polystyrene

  • Bhutta, M. Aamer Rafique;Tsuruta, Ken;Ohama, Yoshihiko
    • International Journal of Concrete Structures and Materials
    • /
    • 제2권1호
    • /
    • pp.35-39
    • /
    • 2008
  • This experimental study examines the applicability of polymer mortar permanent forms using a methyl methacrylate (MMA) solution of waste expanded polystyrene (EPS) to develop effective recycling processes for the EPS, referring to the flexural behavior of a polymer-impregnated mortar permanent form with almost the same performance as commercial products. An MMA solution of EPS is prepared by dissolving EPS in MMA, and unreinforced and steel fiber-reinforced polymer mortars are mixed using the EPS-MMA-based solution as a liquid resin or binder. Polymer mortar permanent forms (PMPFs) using the EPS-MMA-based polymer mortars without and with steel fiber and crimped wire cloth reinforcements and steel fiber-reinforced polymer-impregnated mortar permanent form (PIMPF) are prepared on trial, and tested for flexural behavior under four-point (third-point) loading. The EPS-MMAbased PMPFs are more ductile than the PIMPF, and have a high load-bearing capacity. Consequently, they can replace PIMPF in practical applications.