• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.21-32
• /
• 2007

The households to be surveyed are usually huge number at the level of a city or metropolitan survey, not to mention a nationwide travel survey. Therefore, household travel surveys to figure out true origin-destination (O/D) trip patterns (population O/D) are conducted through a sampling method rather than by surveying all of the population in the system. Therefore, the population O/D pattern can only be estimated by expanding the sampled O/D patterns to the population. It is very difficult to avoid the errors involved in the process of sampling, surveying and expanding O/D data. In order to minimize such errors while estimating the true O/D patterns of the population, the validation and adjustment process should employed by doing a comparison between the expanded sample O/D data and observed link traffic volumes. This study suggests a method of validation and adjustment of the expanded sample O/D data by comparing observed link volumes at several screenlines. The study also suggests a practical technique to modify O/D pairs which are excluded in the screenline validation process by comparing observed traffic volume with the results of traffic assignment analysis. An empirical study was also conducted as an example applying the suggested methods of validation and adjustment with Korea's nationwide O/D data and highway network.

• Journal of Microbiology
• /
• v.42 no.3
• /
• pp.228-232
• /
• 2004

In this paper, we investigated the development of a simplified and rapid primary capture step for the recovery of M13 bacteriophage from particulate-containing feedstock. M13 bacteriophage, carrying an insert, was propagated and subsequently purified by the application of both conventional multiple steps and expanded bed anion exchange chromatography. In the conventional method, precipitation was conducted with PEG/NaCl, and centrifugation was also performed. In the single step expanded bed anion exchange adsorption, UpFront FastLine$\_$TM/20 (20mm i.d.) from UpFront Chromatography was used as the contactor, while 54$m\ell$ (H$\_$o/=15cm) of STREAMLINE DEAE (p=1.2 g/㎤) from Amersham Pharmacia Biotechnology was used as the anion exchanger. The performance of the two methods were evaluated, analysed, and compared. It was demonstrated that the purification of the M13 bacteriophage, using expanded bed anion exchange adsorption, yielded the higher recovery percentage, at 82.86％. The conventional multiple step method yielded the lower recovery percentage, 36.07％. The generic application of this integrated technique has also been assessed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.47-60
• /
• 2019

Purpose: Regional public hospitals have implemented functional reinforcement projects, and the facilities to accommodate them have increased in size. Nevertheless users in hospital are concerned about space shortage and area imbalances. Therefore I will trace the factors and trends that influence the size, and derive the relationship between these and the uses' critical opinion. Methods: Among the indicators for determining the size of medical facilities, the number of beds and total floor area are the essential indicators that directly affect the composition of space and allocation of area inside the medical facility. The purpose of this study is to investigate the change and the factors of change on the these two indicators in regional public hospitals and analyze the trend of changes. Results: In accordance with support undertaking, regional public hospitals have been increased the number of chronic-based beds and expanded additional facilities such as O.P.D specialized centers, emergency centers and funeral homes for reflecting the needs of the regions and times. However, as a result of analyzing the area, regional public hospitals are growing in size mainly on the ward and O.P.D is only expanded the scope of functional reinforcement division but total area level of O.P.D is lower than the recent level. In addition, the levels of D&T, Supply, mechanical/electrical equipment area related to medical support and control environment quality are very low. This is because the functional reinforcement projects have been done without concerning diagnose the whole facility. Implications: If functional reinforcement projects are conducted, to cope with problems of space shortage and imbalance of area, it is judged that an architectural planning that comprehensively analyzes existing facilities and related departments should be included.

• Natural Product Sciences
• /
• v.27 no.2
• /
• pp.61-67
• /
• 2021

Since ancient times, various herbal medicines have been used in folk medicine to treat a variety of diseases. While the majority of drugs belong to the Kingdom of Plantae, some drugs from the Kingdom of Animalia are listed in various Materia medica of alternative medicines. Animal-derived drugs are mentioned in the Unani system of Medicine (USM) and have been used successfully to treat a variety of diseases. Marjān (Corallium rubrum) is a vital marine drug of animal origin that has been used in USM since ancient times and continues to be used today. It possesses a variety of beneficial pharmacological properties, including tonic effects on the heart, brain, stomach, and eyes, pregnancy protection, expectorant, and hemostyptic properties. It is used to treat hemoptysis, palpitation, bleeding piles, hemiplegia, heart failure, and general weakness. It is also an ingredient in a variety of Unani formulations with pharmacological significance. Unani physicians expanded the uses of Marjan and successfully used it to treat a variety of new diseases. There is a dearth of scientific research on its pharmacological and medicinal properties. The urgent need is to validate the Unani claims about its beneficial cardiac and nervine actions, as well as other significant actions mentioned in the Unani literature.

• Ecology and Resilient Infrastructure
• /
• v.5 no.3
• /
• pp.174-179
• /
• 2018

$TiO_2$-embedded expanded polystyrene (TiEPS) balls with powdered $TiO_2$ particles embedded on the surface of EPS were developed, and the growth inhibition of Chlorella ellipsoidea, a green algae, was evaluated. The experiment was conducted using four reactors with various conditions of (A) natural sunlight, (B) natural sunlight + TiEPS balls, (C) dark, and (D) dark + TiEPS balls on the roof of the building during five days. Based on the analysis of cell number, cell morphology, concentrations of chlorophyll-a and phaeopigments, both surface reactions in heterogeneous photocatalysis and light shielding could inhibit the growth of C. ellipsoidea. The highly reactive hydroxyl radicals ($OH{\cdot}$) from TiEPS balls degraded the lipid cell membrane through the peroxidation reaction with the light shielding, eventually resulting in cell inactivation. Although dominant inhibitory effects on the growth of C. ellipsoidea were ambiguous, TiEPS balls were feasible to prevent and inhibit the excessive growth of algae in eutrophic water body.

• Journal of the Korean Mathematical Society
• /
• v.54 no.4
• /
• pp.1301-1316
• /
• 2017

It is well known that every $x{\in}(0,1]$ can be expanded to an infinite $L{\ddot{u}}roth$ series with the form of $$x={\frac{1}{d_1(x)}}+{\cdots}+{\frac{1}{d_1(x)(d_1(x)-1){\cdots}d_{n-1}(x)(d_{n-1}(x)-1)d_n(x)}}+{{\cdots}}$$, where $d_n(x){\geq}2$ for all $n{\geq}1$. In this paper, the set of points with some restrictions on the digits in $L{\ddot{u}}roth$ series expansions are considered. Namely, the Hausdorff dimension of following the set $$F_{\phi}=\{x{\in}(0,1]\;:\;d_n(x){\geq}{\phi}(n),\;i.o.n}$$ is determined, where ${\phi}$ is an integer-valued function defined on ${\mathbb{N}}$, and ${\phi}(n){\rightarrow}{\infty}$ as $n{\rightarrow}{\infty}$.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.1-6
• /
• 2014

This study aims at manufacturing SA welded API-X70 line-pipe with sour gas resistance. A pipe was manufactured by JCO bending process and SA welding using the API-X70 plate guaranteed HIC resistance. SA welded pipe was expanded in order to reduce the residual stress. The evaluation of a pipe for resistance to HIC and SSCC were performed by the RS D 0004 and RS D 0005 standards. For verification that a pipe has acceptable resistance to HIC, fullscale test was carried out. Results showed no cracking for the HIC and SSCC.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.458-465
• /
• 2022

Interest in the use of semiconductor-based photocatalyst materials for the degradation of organic pollutants in a liquid phase has grown, due to their excellent performance and response to the light source. Herein, we fabricated a NiO-SiC-TiO₂ ternary structured photocatalyst which had reduced bandgap energy, with strong activation under UV-light irradiation. The synthesized samples were examined using XRD, SEM, EDX, TEM, DRS, EIS techniques and photocurrent measurement. The results confirmed that the two types of metal oxides were well bonded to the SiC fiber surface. The junction of the new photocatalyst exhibited a large number of photoexcited electrons and holes. The holes tended to oxidize the water and form a hydroxyl radical, which promoted the decomposition of methylene blue. The close contact between the 2D SiC fiber and metal oxide semiconductors expanded the scope of absorption wavelength, and enhanced the usability of the ternary photocatalyst for the degradation of methylene blue. Among three synthesized samples, the NiO-SiC-TiO₂ showed the best photocatalytic effect, and was considered to have excellent photoelectron transfer due to the synergy effect between the metal oxide and SiC.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.694-701
• /
• 2015

In order to get stabilized pure retinol in skin care cosmetics, developing the three layered matrix bead capsules were studied. This study relates to make a cosmetic composition using the three layered matrix capsule that could increase the stability of the active ingredient. A primary encapsulation, vitamin A (pure retinol) of active ingredient was perfectly capsulated into water-in-oil (Water-in-Oil: W/O) emulsion vesicle using PEG-10 dimethicone copolyol emulsifier. A secondary encapsulation of multiple emulsion of the water-in-oil-in-water (W/O/W) emulsion blending W/O emulsion using sucrose distearate of surfactant was developed using homogenizing emulsifying system. Pure retinol of active ingredient was stably capsulized to inside the W/O/W-multiple emulsion in order to load the triple matrix capsulation. By coating it with a polymer matrix base, encapsulated in the triple layered type, which were developed bead encapsulation of 2~10mm uniformly size. To show beautifully appearance capsulated bead type, these finish particles in this triple matrix layer were developed as a gold, green, dark brown, silver and blue color were encapsulated in the bead types. Structural particle certification of triple matrix layer was observed through SEM analysis. Stability of pure retinol was remained stable more than 99.7% for 30 days at $42^{\circ}C$ incubating conditions compared with non-capsule. This technology was applied in different formulations such as various sizes and colors that by applying the skin care cosmetics. In the future, this technology to encapsulate an unstable active ingredient, we expect to be expanded this application in the food and drug as a time delivery system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.8.1-8.1
• /
• 2011

Nanocrystalline titanium dioxide ($TiO_2$) materials have been widely used as an electron collector in DSSC. This is required to have an extremely high porosity and surface area such that the dye can be sufficiently adsorbed and be electronically interconnected, resulting in the generation of a high photocurrent within cells. In particular, their geometrical structures and crystalline phase have been extensively investigated as important issues in improving its photovoltaic efficiency. In this study, we present a new strategy to fabricate a photoelectrode having a periodic structured $TiO_2$ film templated from 1D or 3D polystyrene (PS) microspheres array. Monodisperse PS spheres of various radiuses were used for colloidal array on FTO glasses and two types of photoelectrode structures with different $TiO_2$ materials were investigated respectively. One is the igloo-shaped electrode prepared by $TiO_2$ deposition by RF-sputtering onto 2D microsphere-templated substrates. At the interface between the film and substrate, there are voids formed by the decomposition of PS microspheres during the calcination step. These holes might be expected to play the predominant roles as scattering spherical voids to promote a light harvesting effect, a spacious structure for electrolytes with higher viscosity and effective paths for electron transfer. Additionally the nanocrystalline $TiO_2$ phase prepared by the RF-sputtering method was previously reported to improve the electron drift mobility within $TiO_2$ electrodes. This yields solar cells with a cell efficiency of 2.45% or more at AM 1.5 illumination, which is a very remarkable result, considering its $TiO_2$ electrode thickness (<2 ${\mu}m$). This study can be expanded to obtain higher cell efficiency by higher dye loading through the increase of surface area or multi-layered stacking. The other is the inverse opal photonic crystal electrode prepared by titania particles infusion within 3D colloidal arrays. To obtain the enlargement of ordered area and high quality of crystallinity, the synthesis of titania particles coated with a organic thin layer were applied instead of sol-gel process using the $TiO_2$ precursors. They were dispersed so well in most solvents without aggregates and infused successfully within colloidal array structures. This ordered mesoporous structure provides the large surface area leading to the enough adsorption of dye molecules and have an light harvesting effect due to the photonic band gap properties (back-and-forth reflection effects within structures). A major advantage of this colloidal array template method is that the pore size and its distribution within $TiO_2$ photoelectrodes are determined by those of latex beads, which can be controlled easily. These materials may have promising potentials for future applications of membrane, sensor and so on as well as solar cells.