• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.39-47
• /
• 2013

Recently, there have been various domestic construction activities related to the reclamation of the dredged soils to expand the land use. However, the reclaimed grounds made of the dredged soils cause various problems due to highly compressible and low shear strength nature. Particularly, this nature induces huge problems in case of the harbor facilities and road construction on the reclaimed sites. Furthermore, in the reclamation activities, the marine dredged soils are often used instead of the well sorted sand, which induces problems of compressibilities. Therefore, in this study, the mechanical characteristics of artificial soil mixture of kaolinite representing the marine dredged soils and the pond ash. A large consolidometer is designed and manufactured to produce the artificial soil mixture. To represent various mixing ratio between the fly ash and bottom ash in the pond ash, six samples with the same stress history are made with different mixing ratio among kaolinite, bottom ash and fly ash. Isotropically consolidated and undrained compression tests are performed to investigate the shear characteristics of soil mixtures. Based on the experimental results, as the components of mixed ash increase, the friction angle increase and the cohesion values decrease. Also, the porepressure parameters at failure, Af increase with the mixing components of the pond ash. The portion of bottom ash has more impact on the shear behavior than that of fly ash.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.209-220
• /
• 2014

This study investigated the problem of the existing rural development plan where the opinions of local residents are excluded due to the lack of expert knowledge and limited participation and sought the village development plan driven by the voluntary participation of local residents by applying a rural forum targeting rural villages to solve the problem. As a result of the study, (1) the problem of the current village development plan should be made based on the participation of local residents, and (2) this problem has remained as an important challenge. Therefore, the village improvement activities that have reflected the opinions of local residents can be said to be (3) the process that seeks the change into the rural planning process led by local residents, and this study derived the ways to ensure the voluntary behavior of local residents, strengthen local residents' capacity to create on-going villages, and expand local residents' participation opportunities in the entire process of rural planning through the application of the rural forum. (4) Although it is generally difficult for local residents to propose opinions directly and exert influence in the rural planning and design process and it is not easy to reduce the difference in the perspective between the professionals and local residents, significance lies in the fact that local residents voluntarily determine the future of their region and derive the plan. Therefore, the experience of decision-making and consensus process through the rural forum can promote the sustainability of the village creation participated by local residents and the increase of local residents' role. This study took one village as an example to reflect the results applied to the rural forum, and it is difficult to determine that it has been fully verified with the method of residents' participation. Therefore, future studies to verify the effectiveness of village creation and seek the empirical utilization measures are needed more, and the operation of education programs and various support plans suitable to the capacity and level of local residents should be promoted rather than the traditional lecture-style stereotyped education in the future for sustainable rural development.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.778-784
• /
• 2005

It has been found that the addition of cosurfactant is necessary in order to expand three phase region containing middle phase microemulsion in ternary systems containing alkyl ethoxylate (AEO) nonionic surfactant, commercial lubricant and water. Phase behavior in the surfactant systems with addition of cosurfactant over a temperature range of 30 to $60^{\circ}C$ showed different trends depending on surfactant, temperature and chain length of alcohol added. For the $C_{12}E_4$ system, addition of n-pentanol and n-hexanol both produced a three phase region over a wide range of temperatures but the middle-phase formed was found to be a $L_3$ or D' phase which would not facilitate solubilization of high molecular weight lubricants. On the other hand, for the $C_{12}E_5$ system, the middle-phase microemulsion was found to be formed with addition of a rather long-chain alcohol such as n-hexanol, n-heptanol, n-octanol, or n-nonanol. The results shown with the addition of cosurfactant was understood in connection with interfacial tension measurements and composition analysis. The inability of the hydrocarbon region of the surfactant films to incorporate the large lubricant molecules and high solubility of a hydrophobic surfactant are thought to be the chief reasons for poor solubilization with D' phase.

• Journal of Distribution Science
• /
• v.17 no.1
• /
• pp.95-103
• /
• 2019

Purpose - Recently, many theoretical researches suggested that arts-based marketing strategies provide many benefits for marketers to differentiate their brand or product from others. However, there has been little research focusing on consumers' response types from artwork (artifact-emotion appraisal; A-emotion vs. represented world-emotion appraisal; R-emotion). In order to deepen our understanding of arts-based marketing strategies, we addressed a research question related to how artwork-provoked consumers' emotional response can impact the perceived evaluation of art infused products. Research design, data, and methodology - To answer the research question, we conducted a pretest and one experimental study. The experimental study was 2(art-provoked response type: A-emotion vs. R-emotion) by 2(emotional valence: positive vs. negative) by 2(produce type: hedonic vs. utilitarian) mixed design. The art-provoked response type and emotional valence were between-subject design and product type was within subject design. For the experimental study, 108 undergraduate students and graduate students were randomly assigned to one of 4 conditions (A-emotion-positive, A-emotion-negative, R-emotion-positive, R-emotion-negative). Participants reported their evaluation of art-infused product and other items for a manipulation check. Results - The major results from the experimental study are as follow. First, participant's art-provoked response type influenced evaluation of art infused products differently. More specifically, the effect of emotional valence of artwork on product evaluation was not significant in A-emotion. However, in R-emotion, relative to the product with artwork provoked negative emotional valence, the product with artwork provoked positive emotional valence elicited significantly higher product evaluation. Second, product type also affected the art infusion effect significantly. Particularly, the differential effect of participant's art-provoked response type on product evaluation revealed when it is for a utilitarian product, but not for a hedonic product. Conclusions - Theoretically, the findings of this study expand academic research on art infusion. And the findings also can be extrapolated to generate lots of implication for marketers. In sum, when they plan art marketing strategies to build the favorable relationship with their customers, they need to consider customers' response type of an infused art and product type.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.325-342
• /
• 2018

The Korea Emissions Trading Scheme ( K-ETS), which manages roughly 70% of the greenhouse gas emissions in South Korea, was initiated in 2015, after implementation of its 1st basic plan and the 1st allocation plan (2014) for the 1st phase (2015-2017). During the three and a half years since the launch of K-ETS, there have been critical policy change such as adjustment of the institutions involved, development and revision of the 2030 national GHG reduction roadmap, and change in the allocation plans. Moreover, lack of liquidity and fluctuation of carbon prices in the K-ETS market during this period has forced the Korean government to adjust the flexibility mechanism and auction permits of the market stability reserve. To evaluate the policy change in the K-ETS regarding conformance to its objectives, this study defines three objectives (Environmental Effectiveness, Cost Effectiveness and Economic Efficiency) and ten indicators. Evaluation of Environmental Effectiveness of K-ETS suggests that the national GHG reduction roadmap, coverage of GHG emitters and credibility of MRV positively affect GHG mitigation. However, there was a negative policy change implemented in 2017 that weakened the emission cap during the 1st phase. In terms of the Cost Effectiveness, the K-ETS policies related to market management and flexibility mechanism (e.g. banking, borrowing and offsets) were improved to deal with the liquidity shortage and permit price increase, which were caused by policy uncertainty and conservative behavior of firms during 2016-2018. Regarding Economic Efficiency, K-ETS expands benchmark?based allocation and began auction-based allocation; nevertheless, free allocation is being applied to sectors with high carbon leakage risk during the 2nd phase (2018-2020). As a result, it is worth evaluating the K-ETS policies that have been developed with respect to the three main objectives of ETS, considering the trial?and?error approach that has been followed since 2015. This study suggests that K-ETS policy should be modified to strengthen the emission cap, stabilize the market, expand auction-based allocation and build K-ETS specified funds during the 3rd phase (2021-2025).

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.321-329
• /
• 2021

A measure of managerial ability was derived using DEA, a measure of management efficiency, and the correlation coefficient between discretionary accrual and non-discretionary accrual, net income and operating cash flow standard deviation was used as a proxy for income smoothing. verified. In addition, the manager's compensation was used by taking the natural logarithm of the cash compensation per manager. The analysis results are summarized as follows. The analysis period for hypothesis testing is from 2004 to 2017, as a result of the hypothesis analysis of the correlation with the level of manager's compensation, it was suggested that the income smoothing behavior decreased the performance-based compensation and increased the performance-controlled compensation. This can be said to be the result of indirectly confirming that additional compensation is differentially paid for income smoothing. This study has a contribution to the study by empirically analyzing whether income smoothing affects the relationship between managerial ability and managerial compensation. However, although a number of previous studies empirically analyzed that there are upper and lower bounds for manager compensation, there is limitations that could not be analyzed for asymmetric compensation due to income smoothing is expected to expand.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.456-471
• /
• 2019

Consumers' growing interest in the environment has recently led them to recognize the importance of their dietary life and sustainable consumption. Thus, there is an increasing necessity to identify consumers' response on the relationship between the consumption of functional food and their interest in helping environment. This research was conducted to analyze consumers' behaviors as related to Spirulina, an eco-friendly functional food brand, by subdividing markets according to consumers' food lifestyle. The results showed that consumers were categorized into 3 types (high involvement in diet, pursuit of safety in diet, and pursuit of convenience in diet), and there was a significant difference in the consumption behaviors of the functional food according to the 3 types. Their positive attitude towards functional food and interest in the environment led to changes of their actual purchasing behavior by increased purchase of Spirulina. Also, consumers who displayed high environmental involvement showed a more favorable attitude towards functional food. Therefore, to expand the market of eco-friendly functional food, it is necessary to subdivide the market and target the consumers who are highly involved with protecting the environment, and to execute marketing strategies for eco-friendly products, in order to increase the consumers' awareness about eco-friendly functional food.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.181-189
• /
• 2019

The purpose of this study is to derive obstacle factors to 'high value vocational training' and to suggest development strategies. The training aims to solve the quantitative and qualitative problems of female employment by providing professional training in high value areas such as ICT, SW and knowledge service. To verify the training to meet these objectives, 48 processes operated in 2018 were analyzed and field monitoring was conducted. As a result of the analysis, problems were identified and improvements were derived in terms of learners management, training course design, field practice operation, and performance evaluation. Based on these results, researchers suggested four ways to develop high value vocational training. First, select learners based on combined talent and second, strengthen the project of linking enterprises and structured field practices. Third, establish a performance evaluation system of its own and manage performance and fourth, expand support for excellent training courses and provide consulting for course development. The results of this study are expected to be used as a reference for establishing policies for high value occupational training. In the future, quantitative research should be conducted to clarify the performance and problems.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.54-60
• /
• 2019

Recently, various composite materials for additive manufacturing are interested to expand the application field of 3D printing. 3D printing technique was mainly developed using polymer, and ceramic materials for 3D printing are still in the early stage of research due to the requirement of high solid content and post treatment process. In this study, silica particles with various diameters were surface treated with silane coupling agent, and synthesized as silica composite with photopolymer to apply DLP 3D printing process. DLP is an additive manufacturing technology, which has high accuracy and applicability of various composite materials. The rheological behavior of silica composite was analyzed with various solid contents. After DLP 3D printing was performed using silica composites, the printing accuracy of the 3D printed specimen was less than about 3 % to compare with digital data and he bending strength was 34.3 MPa at the solid content of 80 wt%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.675-686
• /
• 2021

This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.