• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2635-2643
• /
• 2011

Current freight electric locomotives (132 ton) of the eco-friendly and can carry large cargo logistics as a means of generation has increased the demand at home and abroad. Especially, Freight electric locomotives to increase the traction, it is easy to mass and rapid transport. In addition, Freight electric locomotives is no exhaust and low noise compared to diesel -electric locomotives and it can be eco-friendly transportation. CO_CO BOGIE of Freight electric locomotives has no the center pivot and Traction_Rod and Spring of CO_CO BOGIE is mounted on the body. These freight electric locomotives to be satisfied with the safety regulations. Carbody development satisfied Implementation of optimum body and collision is the focus. Accordingly, the different approach in the upper and lower carbody structure and interior and equipment placement is needed. On this paper, the contents give explanation of cases on carbody design composed of freight electric locomotives now developed and process of improvement by structure analysis and collision analysis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.133-143
• /
• 1996

The need of comfortable car and the efforts to overcoming the noise regulations on passenger cars bring about a series of studies on the ruduction of exhaust noises. In this study, acoustic characteristics of various components that compose mufflers of automobiles were analyzed theoretically, and the program which predicts the performance of mufflers was developed by the transfer matrix approach. The simulations were verified by the experiments on a real muffler. By using the developed simulation program, we investigate the effects of each component on the entire muffler system and the energy loss coefficient on absorption materials in the front muffler. Finally, we proposed two designs to improve the performance of a muffler and verified the improved performance by the experiments and simulations.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.5-10
• /
• 2013

Diesel engines have the advantages of good fuel efficiency and low emissions. Therefore, car makers have been developed various kinds of diesel engine management system to clean up emissions while improving fuel efficiency. One of them is the common rail system. In the common rail system, diesel fuel is injected into the combustion chamber at ultra high pressures up to 1,800 bar to ensure more complete combustion for cleaner exhaust gas, and highly precise multiple injection reduces NOx emission, combustion noise and vibration. Generally speaking, common rail system consists of booster pump, high pressure pump, common rail, injectors, control valves, and sensors. The high pressure pump receives low pressure fuel from the booster pump and supply high pressure fuel to injectors through the high pressure common injection rail. Therefore, high pressure pump has an important role in common rail system. In this paper, we have investigated the performance of high pressure pump of common rail system.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.305-309
• /
• 2008

This paper presents an innovative prototype of a new conceptual electromagnetic induction eddy current based fluid heating appliance using voltage-fed quasi resonant zero voltage soft switching PWM high-frequency inverter using IGBTs, which can operate at a constant frequency variable power regulation scheme. The promising simple high efficient low noise inverter type electromagnetic induction eddy current based pipeline fluid heating appliance is proposed for saturated steam generator, superheated steam generator, hot water and hot air producer, metal catalyst heating for exhaust gas cleaning in engine. Under these technological backgrounds, a novel electromagnetic induction eddy current Dual Packs Heater(DPH) based pipeline fluid heating incorporates thin metal layer type package for continuous fluid heating appliances applying two types of voltage-fed quasi load resonant ZVS-PWM high frequency inverter. The unique features of a novel electromagnetic induction eddy current DPH based continuous pipeline fluid heating appliance is illustrated on the basis of simulation and discussed for the steady state operating characteristics and experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1082-1091
• /
• 2004

Analyzed Parametrically was an internal combustion engine combined with gas turbine the cycle of which is splitted into compression side cylinder and expansion side one, and heat adding of which is during constant volume pressure, temperature process. The advantages of each measures were analyzed by means of thermal cycle diagram. The thermal efficiency of partial load cutting off firstly isothermal heat adding and secondly isobaric heat adding also was analyzed The authors suggested some potentials about the performance as for thermal efficiency, mean effective pressure and reducing emissions and noise supposed were the operating parameter of the engine set to some values and were some problems solved.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.2
• /
• pp.54-61
• /
• 1987

This paper is to suggest the test method of sound attenuation caused by absorptive duct silencer using sound intensity method in field. In order to estimate sound attenuation, sound power being radiated from sound power source and duct exhaust terminal was measured by the sound pressure method and sound intensity method in semianechoic and common room. The results of the measured sound attenuation values by sound intensity method are more similar to those of theoretical calculation than those by the sound pressure method. In addition, sound intensity method is much less influenced by sound field condition or continuous background noise than the sound pressure method.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.162-167
• /
• 2000

Construction machinery includes an engine enclosure separated from a cooling system enclosure by a wall to reduce noise and advance cooling system performance. For this structure, however, the axial fan cannot be of benefit to the engine room, and so the temperature rise in the engine room makes several bad conditions. This paper proposes that hot air in engine room is evacuated tv secondary pipe using jet pump. This paper demonstrates the structure and the effect of jet pump and useful guideline on design of area, length, and shape of secondary pipe to maximize the effect of jet pump.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.3
• /
• pp.275-280
• /
• 2005

Recently there has been a growing interest in the design and manufacturing of the muffler tube due to the strict environment regulations, A muffler is an important part used to reduce noise and to purify exhaust gas in cars and heavy equipment. The shape of the muffler tube and the number of the tube hole has been made variously according to the weight and function of the car. The perforating technique of the muffler tube has a great influence on the manufacturing cost. In this study, metal forming analysis has been carried out to investigate the perforating process for the muffler tube and predict an optimal forming conditions of the muffler tube, Also its simulation results by the finite element method were reflected to the die design and the manufacturing system for the muffler tube. The perforating process is performed in the longitudinal direction of the tube. According to the simulation results, when the shear angle of punch was similar to the tube curvature, the optimal shape was obtained. Also when the clearance of die was 0.2mm, the burr was minimized and optimal shear section was obtained.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.329-342
• /
• 2020

In this paper, we analyzed the requirements for the application of UAM, a new concept to solve the traffic congestion in large cities. First, the current domestic and foreign status of research and development related to UAM was investigated and the pros and cons and the time required for each mission radius were analyzed for various configurations of aircraft being commercialized. In addition, in order to analyze the market acceptance of the UAM, the individual's consciousness and reliability requirements were identified and safety requirements were analyzed through accident rate data for each aircraft type. Because it operates in a densely populated urban area, requirement analyses on noise and exhaust, which are environmental factors that can affect the community were performed, and requirements related to aircraft performance, certification standards, and airworthiness standards of FAA and EASA were also analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.39-43
• /
• 1995

대형 상용차용 내연기관에서 방출되는 소음의 음압 레벨은 경우에 따라 140dBA 이상으로 환경소음 배출규제에 부합되는 배출 소음을 위하여는 소음기의 적절한 설계가 필요하다 하겠다. 소음기는 방출 소음을 저감시키는 기본적인 작용 이외에 엔진의 효율을 저하시키는 배압(back-pressure) 상승의 효과를 동반할 뿐만 아니라 차체에의 장착을 위하여 크기와 무게의 제약을 받는다. 따라서 소음기는 설계자의 경험과 과거에 사용되어 온 소음기에 대한 이해, 소음기를 구성하는 단위 요소에 대한 음향학적 해석이론, 제작 과정에서의 경험과 튜닝 등에 바탕을 두고 설계되어져 왔다. 본 연구에서는 대형 상용차에 장착되는 기존 소음기 구성요소의 투과 손실(Transmission Loss: TL)을 전달 행렬법으로 해석하여 음향학적 특성을 규명하고 개별 소음기 요소에 대한 기존의 연구 결과를 바탕으로 공명기와 다공 요소를 이용하여 기존 소음기를 재설계함으로써 배출 소음의 저감을 이루어 나간 과정을 소개하고 이를 적용 사례를 중심으로 살펴보고 있다. 소음기의 설계를 위하여 고려할 수 있는 음향학적 요소는 그 기능과 형태면에서 다양하나 본 연구에서는 대형 상용차용 소음기에 주로 사용 가능한 공명기와 다공관을 주된 설계요소로 생각하였다. 공명기는 공명 주파수 대역의 소음을 저감하는 역할을 하므로 일정한 엔진 회전수 하에서 엔진의 방출 소음중 폭발 성분에 의한 소음을 줄이는데 효과적으로 사용될 수 있지만 가속 주행시에는 회전수(rpm)의 변화에 따라 폭발 주기가 변화하게 되므로 공명기의 설계에 주의를 기울여야 한다. 내연 기관용 소음기에 빈번하게 쓰이는 다공 요소의 해석 방법으로는 Sullivan[1], Kim and Yoon[2] 등의 분할 접근 방법(Segmentation approach)과 Jayaraman and Yam[3], Munjal[4], Peat[5] 등의 연성 제거 방법(Decoupling Approach)등이 제시되었고 평면파 영역에 한하여 해서되어져 왔다. 본 논문에서는 분할 접근 방법(Segmentation Approach)을 이용하여 다공 요소로 이루어진 소음기를 해석하는데 적용하였다.