• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.185-194
• /
• 2014

Internal engine is the main power source of vehicle and is the main source of air pollution. To satisfy this getting rigorous emission regulation, it must be solved simultaneously the dilemma of reducing emission gas and increasing heat efficiency. Diesel engine is preferred compare with gasoline engine in aspect of energy consumption but it must be solved reducing the containing of NOx, CO and HC. In this study: 1. Looking for alternative of performance improvement of Exhaust Gas Recirculation(EGR) which is emission gas reduction system. 2. Reducing malfunction of controlling emission gas. 3. Made possible precision control.

• 산업기술연구
• /
• 제26권A호
• /
• pp.3-15
• /
• 2006

To determine the optimum ventilation systems during long tunnel excavation, the velocity vector profile and the contaminant's distribution at working place are studied using 2-D, 3-D numerical analysis. The main results can be summarized as follow; In case of long tunnels, blower-exhaust-mixture types which enable to use soft blast ducts is most appropriate in terms of ventilation and economical efficiency. Of the same ventilation types, ventilation efficiency has a difference according to blast ducts and the distance between fan and working place. The 3-D numerical result shows that arranging blower and exhaust ducts in the right and left corners of the tunnel respectively is effective to discharge contaminant. The result of the real measurement shows that CO concentration can be reduced to below 50 ppm, which is regulation value, as 16-minutes fan operation goes on.

• 오토저널
• /
• 제13권5호
• /
• pp.81-88
• /
• 1991

Combustion characteristic, concentration of NOx and exhaust smoke opacity was experimentally tested, according to fuel injection timing, mixing ratio of water and methanol for the driving condition of 2000 rpm of engine revolution and constant load(7.5kg/cm$^{2}$) using emulsified fuel of gas oil-water methanol. The result obtained was as following. Thermal efficiency indicated highly 0.4-2.7% for emulsified fuel then gas oil, and injection timing when maximum thermal efficiency, slicily risen then gas oil. For constant fuel injection timing ignition lag was increased, combustion duration decreased, maximum heat release rate indicated high, and concentration of NOx and exhaust smoke opacity is decreased, as function of water and methanol content y was higher.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.103-103
• /
• 2007

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.13-19
• /
• 2008

In this study, a variable induction and exhaust system is applied to turbocharged diesel engine to improve the volumetric efficiency, especially, in a low and transient engine speed range where much of the pollutant matters are expelled out. The volumetric efficiency is known as one of the most important factor which affects significantly engine performance, fuel economy and further emission and noise level. As the torque increase with the engine speed up, the gas flow in an exhaust pipe become pulsating and then has an effect on boost up capacity of air charging into the cylinder and expelling capacity to atmosphere simultaneously. But at a low and idling speed, the pulsation effect was not so significant. Accordingly, resonator was employed to compensate their loss. The variable induction system consists of the secondary pipe, resonator, intercooler, and torque variance were examined with extended operating conditions. In the mean time, for interpretation and well understanding for the phenomena of wave action that arising during intake and exhaust process between turbocharger and variable intake system, the concept of the combined supercharging was introduced. Some of results are depicted which deal with a pressure history during valve events of induction process. Consequently, by the governing of these phase and amplitude of pulsating wave, it enables us to estimate and evaluate for the intake system performance and also, designing stage of the system layout.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.74-79
• /
• 2021

본 연구는 SCR 시스템 내에서 믹서 형상에 따른 배기가스와 요소수의 혼합 효율을 분석하기 위하여 진행되었다. 실험을 위하여 SCR 모사시스템을 제작하였으며, 균일도 측정을 위하여 균일도 측정기를 촉매 위치에 부착하였다. 실험변수는 배기가스의 유량, 온도, 믹서의 타입, 촉매의 거리를 변수로 두어 실험을 진행하였다. 실험결과로는 스월각 분석, 요소수 분포 형태, 균일도 등을 확인하였으며, 모델 A와 B의 스월각 실험결과 모델 A의 스월각이 전체 RPM영역에서 약 7~8도 높게 형성되는 것을 확인할 수 있었다. 요소수 균일도 실험결과 SCR 시스템 내에 믹서가 없는 경우에는 요소수가 한쪽으로 편중되어 있는 것을 확인할 수 있었으며, 믹서 모델 A는 전체적으로 고른 분포를 나타내었고 모델 B는 짧은 거리에 균일도 감지기를 설치하였을 때는 약간의 편중이 있지만 점차 거리가 멀어질수록 안정적인 요소수 분포를 나타내었다. 균일도 목표타겟인 혼합 효율 90%는 모델 A와 모델 B에서 만족할 수 있었으며, 특히 모델 A의 경우가 촉매 위치 10cm에서 이미 90%의 효율을 만족하는 우수한 결과를 나타내었다.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.12-17
• /
• 2002

Recently, the world is faced with very serious problems related to the air pollution due to the exhaust emissions of the diesel engine. So, many of researchers have studied to reduce the exhaust emissions of diesel engine. This study was investigated for various exhaust emissions according to operating conditions in a turbocharged D.I. diesel engine. As a result of experiments in a test engine, the $CO_2\;and\;NO_x$ increased with increasing load, the $CO_2$ and CO decreased with increasing charge air pressure in manifold, the CO decreased with increasing cooling fresh water temperature, and the $NO_x$ decreased with worming cooling fresh water before engine start.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.587-588
• /
• 2014

Studies that the vehicle exhaust system applied by the TEG(thermal electric generator) are actively in progress in order to improve the fuel efficiency of the vehicle. Vehicle exhaust system is on a poor vibration condition, it is susceptible to TEG. This paper is about the development of vibration durability test of TEG mounted on a vehicle exhaust system. Vehicle driving tests are performed to measure the vibration condition of the vehicle exhaust system. The vibration durability test mode of TEG is evaluated using equivalent vibration energy method. The vibration durability tests of TEG are performed using the multi-axial vibration simulation table.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.403-410
• /
• 2015

This study documents the 3-phase BLDC(Brushless DC) motor to improve conventional exhaust fan motor. Energy efficiency, noise, and air pollution reduction for the high-performance vibration of the BLDC motor has been used in many fields. It is necessary to achieve the information of rotor position for driving 3-phase type brushless DC motor. It is also necessary that the PWM control algorithm design for a MOSFET driver to control the motor speed control for each of three phases. BLDC motors for exhaust fan, we studied the controller and software. The control circuit and motor control program through which Exhaust fan up close and person can be used safely and protect the environment.

• 한국분무공학회지
• /
• 제23권1호
• /
• pp.1-8
• /
• 2018

In this study, the effects of variation in cam phasing and valve lift of exhaust valves by using Cam-in-Cam system on combustion and emission characteristics for diesel engine were investigated under GT-POWER simulation environment. This paper showed analytic result of combustion characteristics and diesel exhaust valve's control with GT-Power 1-D detail model. As a result, it was found that volumetric efficiency and IMEP were decreased as the exhaust valve opening and closing timing is advanced due to its internal EGR effects. Also, it was found that NOx emission were decreased as EVC timing was retarded. These show that the retarding the exhaust valve closing and opening while keeping the duration at constant can be effective for controlling AFR and mixing rate in diffusion combustion of diesel engine.