• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2013

As the need of electric motor is increased rapidly throughout our society, the various application fields are created and the service market called robot gets expanded as well as the existing industrial market. Out of those, the joint systems such as humanoid that is servo actuator for position control or all fields which require multi-degree of freedom (multi-DOF) require the development of innovative actuator. It is multi-DOF spherical motor that can replace the existing system in multi-DOF operating system. But, multi-DOF spherical motor that has been researched up to date is at the stage which is insufficient in performance or mechanical practicality yet. Thus, first of all the research results and limitation of the previously-researched guide frame-type spherical motors were analyzed and then the feature of double air-gap spherical motor which was devised to complement that was studied. The double air-gap multi-DOF spherical motor is very suitable spherical motor for system applying which requires the multi-DOF operation due to its simple structure that does not require other guide frame as well as performance improvement due to its special shape which has two air-gaps. So, the validity of the study was verified by designing and producing it with 3D-FEM through the exclusive jig for multi-DOF spherical motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2446-2452
• /
• 2012

In order to meet the recently enhanced emission standards at home and abroad, it is necessary to develop the CRDI ECU control algorithm that users can adjust fuel injection timing and amount in response to their needs. Therefore, this study developed the simulator for knocking analysis that enables knocking discrimination and engine balance correction applicable to the ECU exclusive to the industrial CRDI engine. The purpose of this study is to provide the driver-oriented diagnostic service that enable drivers to diagnose vehicles directly by developing diagnostic devices for vehicles with ths use of the results of the developed simulator for knocing analysis according to the OBD-II standards. For this purpose, this study aims to improve the fuel efficiency of vehicles by proposing the S/W design method of the OBD-II diagnosis device that can provide real-time communcations with the use of wired system and bluetooth module as a wireless system to send and recevice automobile fault diagnosis signal and sensor output signal, and to suggest an improvement for engine efficiency by minimizing the generation of harmful exhaust gas.

• Journal of Science of Art and Design
• /
• v.2
• /
• pp.128-160
• /
• 2000

The objective of this study is to establish a theoretical framework of factors and strategies for success , by probing into design management strategies and the resulting product development details of firms from many parts of the world that improved their images and competitiveness through industrial design. As a means for a company to successfully develop products and to survive, strategies for successful product development were unfolded by many leading businesses of industrial design, whose methods and strategies were respectively unique. International companies such as Philips, Sony, Braun, Ford, and Alessi employed industrial design to not only renew their brand perceptions, but also added values to human life by embedding exclusive designs that customers prefer in their products. They have used design as a business strategic tool, whose elemental processes are, planning, organizing, directing, and controlling. In conclusion, the successful strategies of the leading global companies' design management and product development share the following First, these companies seek design strategies that foresee upcoming changes and are ahead of their time. Second, the CEO is aware of the importance of design, has an appreciative eye for design, and puts in effort into supporting and developing his or her design sector. Third, the director is provided with the conditions in which he or she can take control of one's tasks, and has the abilities and qualities to provide visions for the future. Fourth, the product development team uses original and logical processes and is highly organized. Fifth, the design organization effectively utilizes necessary experts of internal and external company. Sixth, the firm produces innovative products that meet the customers' demand and predict the future. Seventh, the products developed shall employ cutting-edge technologies and are new and original. Eighth, the product must have an identity as a product that represents the company.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.789-798
• /
• 2016

Frequent algal blooms at major river systems in Korea have been serious social and environmental problems. Especially, the appearance of cyanobacteria with toxic materials is a threat to secure a safe drinking water. In order to model the behaviour of cyanobacteria cell number, an exclusive causality analysis using prewhitening technique was introduced to delineate effective parameters to predict the cell numbers of cyanobacteria in Seungchon Weir and Juksan Weir along Youngsan river system. Both input and output transfer function models were obtained to explain temporal variation of cyanobacteria cell number. A threshold behaviour of water temperature was implemented into the model development to consider winter characteristic of cyanobacteria. The implementation of water temperature threshold into the model structure improves the predictability in simulation. Even though the input output transfer model cannot completely explained all blooms of cyanobacteria, the simple structure of model provide a feasibility in application which can be important in practical aspect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.603-610
• /
• 2006

This paper considers the problem of mitigating CCI(Co-channel Interference) in cellular OFDMA downlink systems. The users in the cell-edge area suffer from large CCIs, and their SINR requirements are hard to be maintained. To guarantee their QoS, we propose a new exclusive sub-carrier allocation and power control algorithm. The performance of the proposed two-step algorithm is simulated in SUI-A path-loss model, and it is compared with that of the conventional algorithm. The simulation results show that the data transmission rate in the cell-edge area was increased by 600Kbps within the same power constraint. The results indicate that with proposed algorithm, the data rate stability can be achieved independently of the user location in the cell.

• Archives of design research
• /
• v.17 no.1
• /
• pp.63-76
• /
• 2004

Although information design principles had originated from the graphic design field including publishing design in 1970s, information design have taken one of the most important positions in multimedia design fields as the present since Richard Saul Wurmn started his researches on information design and its practical application on internet environments. However, relatively little researches have been performed for building identity of information design in multimedia design fields so far and moreover in some cases, information design is likely to be narrowly viewed as 'the representation of a piece of information and its visualization' which was defined in traditional graphic design field. This research circumstance leads the study to investigate characteristics of information design in current multimedia design with contingent perspective which is compared to the traditional information design. The study results suggest 5 characteristics of information design including 'suggesting context & finding out information hierarchy', 'access of integrated consideration & share of information control', 'using of multi-dimensional media & content first', 'stabilization of information quality & combinational understanding of meaning', 'bilateral information representation & user's knowledge expansion'. Future researches, based on the results of the study, are expected to be expanded to a degree with argument for inter-dependent and/or exclusive characteristics of adjacent fields of information design such as interface design, interaction design and experience design.

• Journal of Internet Computing and Services
• /
• v.20 no.5
• /
• pp.37-47
• /
• 2019

The purpose of this paper is to construct a system that matches the patient's image disease information with the medical image viewer in providing the medical image information to the medical staff. Currently, medical image information systems that are commercialized mostly provide only one image viewer with various image information of diseases or use incompatible exclusive viewers. For this reason, we designed and implemented a medical image information viewer matching system that integrates and provides specialized viewers that can be selected by diseases' image information. That is, it is a system to match and view medical image viewers based on disease information extracted from tag information stored as the metadata in DICOM file, which is medical image information standard, for disease-specific viewer matching. We analyzed the execution performances through our retrieval service of medical image information from our implementation system, and showed compatibility and control with various viewers.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.157-176
• /
• 2016

This study is to investigate Trademark Prior Use Defence of prior use party under Trademark Law of the People's Republic of China. Chinese Trademark Law was amended for the third time and this Law shall enter into force on 1 May 2014. This third amendment introduced Prior Use Defence Right of Trademark for the first time. Article 59(3) gives the right to the prior use party for the continuous use of such trademark under the condition that first, an identical or similar trademark has been used in connection with the same goods or similar goods by others before the registrant's application, second, such trademark should have a certain influence in certain market, and third, such aforesaid trademark should be used within the original scope continuously. Then the exclusive right holder of said registered trademark shall have no right to prohibit others from continuous use of such trademark. Korean companies should be aware that it is almost impossible to search prior use trademark before a dispute arises, since the prior use trademark has never been registered. The best way to control the prior use trademark is to superintend aforesaid trademark for the use within the original scope.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.81-94
• /
• 2016

The Korean real-time traffic responsive control systems, Cycle Offset Split Model of Seoul (COSMOS), employs a single theoretical model to estimate the degree-of-saturation (DS) on approaches. However, the deployment of the system has been accomplished without practical consideration of its field performance. This paper delivers a diagnosis study performed to find the relationships yet known on the DS values against the operational conditions unproved in theory but ordinarily observed in field practice. Based on the analysis of the historical log data (476,505 cycles) obtained from the COSMOS server, it was found; (1) full coverage of lane detections should perform better than the sample coverage of detection in ordinary conditions, (2) the sample coverage of detection perform better than the other case with an exclusive bus lane, (3) detection in which a shared lane is involved provide poor estimation of DS, (4) poor DS estimation when a detection lane is adjacent to a shared lane, and (5) the DS values obtained during a day can hardly be stable all time. The findings suggest traffic engineers a progressive direction to move forward for the next real-time traffic control systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.545-551
• /
• 1998

The Radio communication by existing SSB, VHF, etc. in a coast station and a base station for military affairs is still used to a very important the device of information delivery or transmitting and receiving by the remote controller to using to the exclusive cable for a equipment established at a long distance. When a number of consumer to connected and operated by a number of transceiver is essential for a circuit controller of ICS, in KOREA, is devoted by import to considerable quantity because of to be delayed development of this field. This Paper has been realized to optimal algorithm and designing of a circuit connection controller by multi-processor to pre-stage for the development of ICS. The H/W is composed able to remote control to circuit connector with the several slave processor and a processor for master, and this has taken possible through without any obstacle to communication circuits of a control signal by FSK system. The S/W make possible monitoring for communication condition of other circuits by means of a serial communication system by the multi-processing. This paper has been studied for connecting to a circuits wished to rapidly and precisely by the full application to a interrupt technique. A technique to control by remote to a number of transceiver is a way increasing to application for a frequency resource of the limited MF/SF, VHF and the existing radio communication technique. According to, this paper will achieve to be the reduction of energy & equipment and multiplicity of information delivery in the general communication and disposal to rapid and exact for the important communication as distress, urgency and safety on the sea.