• 한국재료학회지
• /
• 제21권6호
• /
• pp.295-298
• /
• 2011

ZnS:Mn, Dy yellow phosphors for White Light Emitting Diode were synthesized by a solid state reaction method using ZnS, $MnSO_4{\cdot}5H_2O$, S and $DyCl_3{\cdot}6H_2O$ powders as starting materials. The mixed powder was sintered at $1000^{\circ}C$ for 4 h in an air atmosphere. The photoluminescence of the ZnS:Mn, Dy phosphors showed spectra extending from 480 to 700 nm, peaking at 580 nm. The photoluminescence of 580 nm in the ZnS:Mn, Dy phosphors was associated with $^4T_1{\rightarrow}^6A_1$ transition of $Mn^{2+}$ ions. The highest photoluminescence intensity of the ZnS:Mn, Dy phosphors under 450 nm excitation was observed at 4 mol% Dy doping. The enhanced photoluminescence intensity of the ZnS:Mn, Dy phosphors was explained by energy transfer from $Dy^{3+}$ to $Mn^{2+}$. The CIE coordinate of the 4 mol% Dy doped ZnS:Mn, Dy was X = 0.5221, Y = 0.4763. The optimum mixing conditions for White Light Emitting Diode was obtained at the ratio of epoxy : yellow phosphor = 1:2 form CIE coordinate.

• Journal of Power Electronics
• /
• 제4권4호
• /
• pp.205-216
• /
• 2004

In this paper, a three-phase induction machine-based wind power generation scheme is proposed. This scheme uses a low-cost diode bridge rectifier circuit connected to an induction machine via an ac load voltage regulator (AC-LVR) to regulate dc power transfer. The AC-LVR is used to regulate the DC load voltage of the diode bridge rectifier circuit which is connected to the three-phase self-excited induction generator (SEIG). The excitation of the three-phase SEIG is supplied by the static VAR compensator (SVC). This simple method for obtaining a full variable-speed wind turbine system by applying a back-to-back power converter to a wound rotor induction generator is useful for wind power generation at widely varying speeds. The dynamic performance responses and the experimental results of connecting a 5kW 220V three-phase SEIG directly to a diode bridge rectifier are presented for various loads. Moreover, the steady-state simulated and experimental results of the PI closed-loop feedback voltage regulation scheme prove the practical effectiveness of these simple methods for use with a wind turbine system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 2001

An accurate cross sections set are necessary for the quantitatively understanding and modeling of plasma phenomena. By using the electron swarm method, we determine an accurate electron cross sections set for objective atoms or molecule at low electron energy range. In previous paper, we calculated the electron transport coefficients in pure CF$_4$ molecular gas by using two-term approximation of the Boltzmann equation. And by using this simulation method, we confirmed erroneous calculated results of transport coefficients for CF$_4$ molecule treated in this paper having 'C2v symmetry'as C$_3$H$_{8}$ and C$_3$F$_{8}$ which have large vibrational excitation cross sections which may exceed elastic momentum transfer cross section. Therefore, in this paper, we calculated the electron transport coefficients(W and ND$_{L}$) in pure CF$_4$ gas by using multi-term approximation of the Boltzmann equation by Robson and Ness which was developed at James-Cook university, and discussed an application and/or validity of the calculation method by comparing the calculated results by two-term and multi-term approximation code.e.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.259-266
• /
• 2019

Tuning of electro-optical properties of nano-structured $SnO_2:Ga$ powders in a micro drop fluidized reactor (MDFR) was highly effective to enhance the activities of powders to be used as sensor materials. The tuning was conducted continuously in a facile one-step process during the formation of powders. The microscopic hydrodynamic forces affected the band gap structure and charge transfer of $SnO_2:Ga$ powders through the oxygen and interfacial tin vacancies by providing plausible pyro-hydraulic conditions, which resulted in the decrease in the electrical resistance of the materials. The analyses of room-temperature photoluminescence (PL) spectra and FT-IR exhibited that the tuning could improve the surface activities of $SnO_2:Ga$ powders by adjusting the excitation as well as separation of electrons and holes, thus maximizing the oxygen vacancies at the surface of the powders. The scheme of photocatalytic mechanism of $SnO_2:Ga$ powders was also discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.179-179
• /
• 2016

A radio-frequency (RF) Inductively Coupled Plasma (ICP) torch system was used for boron-nitride nano-tube (BNNT) synthesis. Because of electrodeless plasma generation, no electrode pollution and effective heating transfer during nano-material synthesis can be realized. For stable plasma generation, argon and nitrogen gases were injected with 60 kW grid power in the difference pressure from 200 Torr to 630 Torr. Varying hydrogen gas flow rate from 0 to 20 slpm, the electrical and optical plasma properties were investigated. Through the spectroscopic analysis of atomic argon line, hydrogen line and nitrogen molecular band, we investigated the plasma electron excitation temperature, gas temperature and electron density. Based on the plasma characterization, we performed the synthesis of BNNT by inserting 0.5~1 um hexagonal-boron nitride (h-BN) powder into the plasma. We analysis the structure characterization of BNNT by SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy), also grasp the ingredient of BNNT by EELS (Electron Energy Loss Spectroscopy) and Raman spectroscopy. We treated bundles of BNNT with the atmospheric pressure plasma, so that we grow the surface morphology in the water attachment of BNNT. We reduce the advancing contact angle to purity bundles of BNNT.

• 한국방사선학회논문지
• /
• 제13권4호
• /
• pp.645-652
• /
• 2019

폴리 인산염 모체에 이온 반경이 유사한 Sr과 Eu 치환에 적합한 형광체를 찾아 단일 희토류 이온이 첨가된 형광체를 합성하고 후처리를 통해 형광 영역이 변화를 연구하였다. 고상법을 이용하여 Eu 이온이 첨가된 $NaSr(PO_3)_3$형광체를 합성하고 탄소열환원법을 통하여 $NaSr(PO_3)_3:Eu^{2+}$ 형광체를 완성하였다. 두 형광체 모두 X선 회절 측정을 통하여 결정상을 확인하였다. $NaSr(PO_3)_3:Eu^{3+}$의 여기 및 방출 스펙트럼 모두 $Eu^{3+}$ 농도가 증가할수록 형광 강도가 증가하였고 농도소광을 확인하였다. 방출스펙트럼에서 $Eu^{3+}$ 농도가 높아질수록 $Eu^{3+}$ 주변 환경의 국부적 대칭성이 높아지는 것 알 수 있었다. $NaSr(PO_3)_3:Eu^{2+}$ 농도별 방출스펙트럼에서 $Eu^{2+}$ 이온 농도 증가에 따른 $Eu^{2+}$ 이온 사이의 임계 거리가 가장 가까운 $Eu^{2+}$ 사이의 에너지 전달에 의해 형광이 감소하는 농도소광의 메커니즘을 확인하였다. 단일 희토류 이온이 첨가된 형광체의 후처리를 통해 형광 영역 변화가 가능하며 형광체 내 $Eu^{3+}$ 주변 환경의 국부적 대칭성과 $Eu^{2+}$ 이온간 거리에 따른 에너지 전달 및 농도소광 메커니즘 연구를 통하여 형광 특성 응용에 적합하고 효율성이 높은 형광체 개발에 좋은 모체 결정으로 사용 될 것으로 기대된다.

• 한국광학회지
• /
• 제9권4호
• /
• pp.221-226
• /
• 1998

$Er_2O_3$를 첨가한 $PbO-Bi_2O_3-Ga_2O_3$ 삼성분계 중금속 산화물 유리로부터 발생하는 $1.5\mu\textrm{m}$와 2.7$\mu\textrm{m}$ 등의 형광에 대하여 복사 천이율, 형광 수명, 흡수 및 유도 방출 단면적 등을 조사하였다. 중금속 산화물 유리의 낮은 포논 에너지($~500cm^{-1}$)로 인하여 기존 산화물 유리로부터 관찰할 수 없었던 형광들의 양자 효율이 크게 높아졌으며 방출 단면적도 증가하였다. 한편, 798 nm 여기광의 상향 전이를 통한 녹색과 적색의 형광이 방출됨을 확인하였고, 각 에너지 준위의 형광 수명을 이용하여 다중포논 완화(multiphonon relaxation)를 정량적으로 규명하였다. $Er^{3+}:^4S_{3/2}{\rightarrow}^4I_{15/2}$ 천이에 의한 녹색 형광은 기지 유리(host glass)의 밴드 갭(band gap)흡수에 의한 비복사 천이의 영향을 받으므로 이 형광의 양자 효율을 높이기 위해서는 유리를 불활성 기체 분위기에서 용융하거나 자외선쪽 투과단이 짧은 유리 망목 형성제(glass-vetwork former)가 첨가된 기지 조성을 선택하는 것이 바람직하다.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.355-360
• /
• 2018

$LuNbO_4:0.2Yb^{3+},xTm^{3+}$ powders were prepared using a solid-state reaction process. The effects of the amount of Tm on up-conversion(UC) and down-conversion(DC) luminescence properties are investigated. X-ray diffraction patterns confirm that $Yb^{3+}$ and $Tm^{3+}$ ions are successfully incorporated into Lu sites. Under 980 nm excitation, the UC spectra of the powders predominantly exhibit strong near-infrared emission bands that peak at 805 nm, whereas weak 480 nm emission bands are observed as well. The emission bands are assigned to the $^1G_4{\rightarrow}^3H_6$ (480 nm) and 3 $^3H_4{\rightarrow}^3H_6$ (805 nm) transitions of the $Tm^{3+}$ ions via an energy transfer from $Yb^{3+}$ to $Tm^{3+}$; two- and three-photon UC processes are responsible for the 805 and 480 nm emissions, respectively. The DC emission spectra exhibit blue emission ($^1D_2{\rightarrow}^3F_4$) of $Tm^{3+}$ at 458 nm. The amount of Tm affects the emission intensity with the strongest emissions at x = 0.007 and 0.02 for the UC and DC luminescence, respectively. The results demonstrate that $LuNbO_4:Yb^{3+},Tm^{3+}$ phosphors are suitable for bio-applications.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.599-603
• /
• 2008

The complexes Pd(nbmtp)Cl2 and Pt(nbmtp)Cl2 (nbmptp = 1-nonyl-3,4-bis(methylthio)pyrrole) were prepared and their x-ray structures were determined at room temperature. The four-coordinated metal unit and the pyrrole ring formed a nearly planar geometry. The free ligand dissolved in CH2Cl2 produced two luminescence bands associated with the lone-pair electron of S (l max = 525 nm) and the pyrrole p electron (l max = 388 nm). When the two complexes were dissolved in CH2Cl2, these two luminescence bands were also observed, although the low-energy band was blueshifted. For the crystalline Pt(II) complex, only the strong charge transfer band (l max = 618 nm) from the d* orbital of Pt resulted from excitation of the lone-pair electron of S.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.105-106
• /
• 2013

Surface plasmon resonance (SPR) is classified into the propagating surface plasmon (PSP) excited on flat metal surfaces and the local surface plasmon (LSP) excited by metalnanoparticles. It is known that fluorescence signals are enhanced by these two SPR-fields.On the other hand, fluorescence is quenched by the energy transfer to metal (FRET). Bothphenomena are controlled by the distance between dyes and metals, and the degree offluorescence enhancement is determined by the correlation. In this study, we determined thecondition to achieve the maximum fluorescence enhancement by adjusting the distance of ametal nanoparticle 2D sheet and a quantum dots 2D sheet by the use of $SiO_2$ spacer layers. The 2D sheets consisting of myristate-capped Ag nanoparticles (AgMy nanosheets) wereprepared at the air-water interface and transferred onto hydrophobized gold thin films basedon the Langmuir-Schaefer (LS) method [1]. The $SiO_2$ sputtered films with different thickness (0~100 nm) were deposited on the AgMy nanosheet as an insulator. TOPO-cappedCdSe/CdZnS/ZnS quantum dots (QDs, ${\lambda}Ex=638nm$) [2] were also transferred onto the $SiO_2$ films by the LS method. The layered structure is schematically shown in Fig. 1. The result of fluorescence measurement is shown in Fig. 2. Without the $SiO_2$ layer, the fluorescence intensity of the layered QD film was lower than that of the original QDs layer, i.e., the quenching by FRET was predominant. When the $SiO_2$ thickness was increased, the fluorescence intensity of the layered QD film was higher than that of the original QDs layer, i.e., the SPR enhancement was predominant. The fluorescence intensity was maximal at the $SiO_2$ thickness of 20 nm, particularly when the LSPR absorption wavelength (${\lambda}=480nm$) was utilized for the excitation. This plasmonic nanosheet can be integrated intogreen or bio-devices as the creation point ofenhanced LSPR field.