Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)
The causes and treatment of alopecia are concluded based on the records found successive oriental medicine in order to persuade new treatments for alopecia as following : 1. In the context of modern medical science male-dominated alopecia was referred as dok-rak(禿落), cho-dok(早禿), chon-dok(全禿), pal-ju-tal-bal, chu-bal-sun and pal-sun(髮癬) alternatively, while alopecia areata was refereed as yu-pung(油風), pan-dok(斑禿), kwi-ji-du and kwi-che-du(鬼剃頭). 2. The causes of alopecia is related with condition of Gi(vital energy) and Hyul(blood) in the twelve channels, such as weakening of vital energy in the conduits, condition of internal organs as heat in the lung, weak kidney or liver vitality, and eating habits such as severe ingestion of bitter taste or sweet taste food. Other distinct reasons are penetration of wind and dryness into a head due to weakening Gi and Hyul inside human body, flaring up of the asthenic fire due to excessive eatings, hard labour or psychological sufferings deficiency of blood, deficiency of vital essence of kidney, phlegm caused by dampness and heat, and stagnated blood. 3. According to demonstration of alopecia, the causes of alopecia areata are listed as internal wind due to heat of blood, deficiency of liver and kidney, blookage of channels and collaterals by stagnated blood, and causes of male-dominated alopecia are listed as wind dryness caused by heat of blood, dampness and heat, and heat, wind and dryness due to deficiency of blood.
As penetration level of Distributed Generations (DGs) on weak distribution networks gets higher, voltage rise problem can often occur due to reverse power which is not expected in conventional distribution networks. It, however, cannot be effectively solved by using conventional voltage regulating devices such as On-Load Tap Changers (OLTCs), Step Voltage Regulators (SVRs) because those do not consider the presence of DGs when determining relevant setting parameter for voltage regulation. This paper presents a scheme for voltage regulation using coordinated control between OLTC and DGs which can actively participate in the regulation. The scheme decides which device should be operated first based on the characteristics of regulating devices, in order to prevent unnecessary operation of output changes of DG and excessive tap changing operation of OLTC. Computer simulations considering daily irradiation of PV and load curve are performed by using MATLAB Simulink and performance comparison between the presented scheme and conventional ones is also made. It can be concluded from simulation results that the scheme presented is very effective to regulate voltages in distribution networks with multiple DGs.
This study intends to clarify how Sayeok-tang(here in after reffered to SYT) affect C57BL/10 mice whose osteoarthritis was induced by papain. Osteoarthritis was induced by injecting papain in the knee joint of 3 groups(n=6) of mice. Normal group was non-treatment group and was not injected papain, whereas control mice were orally administered with $200{\mu}{\ell}$ of physiological saline. Positive comparison group was medicated with 100 mg/kg of Joins$^{(R)}$ mixed with $200{\mu}{\ell}$ of physiological saline. Experimental group was medicated with 400 mg/kg of SYT mixed with $200{\mu}{\ell}$ of physiological saline. Both Positive and experimental comparison groups were orally medicated once per day for 4 weeks. After the experiment, the functions of liver and kidney, inflammation cytokine values within serum, degree of revelation for inflammation cytokine genes, immune cells within blood, metabolism of arachidonic acid and amount of cartilage were measured and histopathological changes in the knee joint structures were observed. As results, SYT had no significant effect on the liver and kidney functions. Interleukin-$1{\beta}$(IL-$1{\beta}$), interleukin-6(IL-6), monocyte chemo attractant protein-1(MCP-1) and tumor necrosis factor-${\alpha}$(TNF-${\alpha}$) were significantly decreased. Inflammation cytokines in joints were all significantly decreased. Prostaglandin $E_2(PGE_2)$, thromboxane $B_2(TXB_2)$ were significantly decreased. Destruction of cartilage on micro computed tomography(CT)-arthrography was meaningfully decreased. In terms of histopathology, infiltration of inflammation, proliferation of synovial membrane, subsidence of cartilage and bone due to penetration of excessive formation of synovial cell and destruction of cartilage were small. Based on all results mentioned above, Sayeok-tang(SYT) is believed to be meaningful for suppressing the progress of osteoarthritis and its treatments because of its anti-inflammatory effects and alleviation of pain with histopathological effective efficacy.
The result of a small electrostatic precipitator which is in order to decrease indoor air pollution for optimal efficiency was shown as follows. Although the closer distance between the discharge electrode and dust collecting electrode shows the better throughput efficiency by forming strong electrostatic Field, it does not have profound impact in case of optimal dust collecting area. G.P(gas passage) which is the distance from dust collecting electrode to dust collecting electrode is a crucial factor to decide dust collecting efficiency. The narrower distance of G.P shows the better throughput efficiency whereas it decreases when the distance is too narrow since sparks ensue by increasing the capacity of electrostatic charging system 5 mm regards as optimal efficiency in this experiment. Although the higher voltage shows the higher dust collecting efficiency overall, the experiment was not able to keep performing since the sparks which decrease dust collecting efficiency ensue over 40 kV. The efficient and safe voltage state is considered 3.6 kV in this experiment. The most crucial factor for dust collecting efficiency of an electrostatic precipitator which is in order to decrease indoor air pollution is applied voltage. In addition, optimal raw gas flow rate(2.4 m/sec) is more important factor than the excessive increase of dust collecting area.
본 연구에서는 스테아르산(SA), 올레산(OA), 리놀레산(LA) 등의 지방산이 지질 소포체 막과의 상호 작용에 미치는 영향에 관하여 살펴보았다. 이를 위하여 지방산 종류 및 농도 변화에 따른 리포좀 평균 입자 크기 및 제타 전위, 리포좀 막의 deformability, fluorescence anisotropy ratio 등을 측정하고 TEM 관찰을 통하여 지방산 첨가가 리포좀 막의 유동성 변화에 미치는 역할에 관하여 살펴보았다. 기본적으로 SA, OA, LA 등의 지방산 첨가는 동일한 경향을 나타내었다. 즉, 지방산을 첨가함에 따라 리포좀이 보다 치밀한 패킹을 갖게 되어서 리포좀의 크기는 감소하고 제타 전위 값은 증가하였으나, 지방산의 과도한 첨가는 리포좀에서 다형(polymorphic) 구조를 가지는 지질 입자 응집체로의 전이를 일으켰다. SA, OA 및 LA 지방산 시스템에서의 최소 리포좀 크기와 가장 치밀한 리포좀 패킹은 레시틴 대비 지방산의 몰 비율이 각각 0.70, 0.50, 0.25인 조건에서 관찰되었으며, 리포좀 막의 deformability와 fluorescence anisotropy ratio 측정에 의한 리포좀 막의 유동성 측정 결과는 TEM 및 입자 크기 측정 결과와 일치함을 알 수 있었다.
본 연구는 해동 중 발생하는 drip 손실, 미생물의 오염, 표면의 과열 등을 방지하면서 급속 해동 방법을 찾기 위해 동결 돈육에 여러 가지 해동 방법을 적용하였다. 4, 28, $50^{\circ}C$에서의 해동과 2,450, 915 MHz의 microwave를 이용하여 해동을 실시하였고, 915 MHz microwave 해동은 출력을 5, 10, 15 kW로 변화시키면서 단일 조사와 $120^{\circ}C$의 열풍을 함께 조사한 경우를 해동시간, 온도분포, drip 손실, 보수력, 표면색도, 총세균수를 측정하였다. 915 MHz microwave를 이용한 해동은 열전도에 의한 해동보다 2백배 이상 시간이 단축되었고, 2,450 MHz microwave를 이용한 해동 방법의 침투깊이의 제한에서 발생되는 문제를 개선시킬 수 있었으며 drip 손실, 보수력, 총세균수에 있어서 효과가 컸다. 저주파수(915 MHz), 저출력(5 kW)의 microwave와 대류 가열을 병용하여 품질 저하를 최소한으로 방지하면서 급속해동을 위한 산업적 이용이 가능한 것으로 기대할 수 있었다.
Objectives : Chim-Gu-Kyung-Heom-Bang(CGKHB; 鍼灸經驗方) is the needle and moxa specialized document written by the doctor specialized in needle and moxa treatment of Joseon(朝鮮), Heo Im(1570-1647). The document was published in April 1644(22nd year of King Injo). CGKHB contains the needle and moxa treatment techniques accumulated by the Joseon Dynasty as well as the personal experience of Heo Im. The aim of this study is to restore the past treatment method as a method of Needle Insertion Method at CV12(NIM-CV12, needle to penetrate blood vessel technique) in CGKHB.. Methods : Through Dong-Yi-Bao-Gam(DYBG; 東醫寶鑑), the implication of Korean medicine study of the Jungwan(CV12) has been studied. Next is the contemplation of the NIM-CV12 of CGKHB with the Acupuncture Treatment Using Jungwan(中脘鍼法) of Park Tae-won and Acupuncture Treatment for Byeokjeok(癖積鍼法) of "Geup Yubang". Results and Conclusions : 1. CV12 is one of the acupuncture points representing stomach(脾胃), middle energizer(中焦), phlegm-fluid retention(痰飮) and greater yin(太陰). 2. NIM-CV12 of CGKHB is the technique to penetrate the needle into the CV12 strictly relying on tactile sense of a person who give the penetration. This CV12 administration was carried out at intervals of every 7 or 8 day. During the administration period, the patient was not allowed to intake excessive amount of food. 3. The Acupuncture Treatment Using Jungwan(中脘鍼法) of Park Tae-won and Acupuncture Treatment for Byeokjeok(癖積鍼法) of "GeupYubang", existed in the same era of the NIM-CV12 of CGKHB, have similar linkage to the NIM-CV12 of Heo Im.
Failure analysis on the welded type 304 pipe used for cooling water piping in the district heating primary side was conducted. Inorganic elements and bacteria in the cooling water and in corrosion products were analyzed, and the weldment was inspected by microscopy and a sensitization test. Corrosion damages were observed in the heat-affected zone, on weld defects such as incomplete fusion or excessive penetration caused by improper welding, or/and at the 6 o'clock position along the pipe axial direction. However, the level of concentration of chloride in the cooling water as low as 80 ppm has been reported to be not enough for even a sensitized type 304 steel, meaning that the additional corrosive factor was required for these corrosion damages. The factor leading to these corrosion damages was drawn to be the metabolisms of the types of bacteria, which is proved by the detection of proton, sulfur containing species, biofilms, and both bacteria and corrosion product analyses.
인공동결공법(artificial ground freezing method)은 연약지반 및 도심지에서의 지하구조물 시공에 적합한 차수 및 지반보강 공법이다. 인공동결공법은 동결관(freezing pipe)을 지중에 매설한 후 냉매(refregerant)를 순환시켜 대상 지반에 차수벽 및 지지체의 역할을 수행하는 동결벽체(frozen wall)를 형성한다. 그러나 간극수의 동결에 따른 간극수의 부피팽창은 지반의 변형을 야기시킬 수 있고, 시공완료 후 동결토의 융해에 따른 지반의 소성변형 및 입자의 재배치 등은 지반의 역학적 특성을 변화시킨다. 본 논문에서는 인공동결공법에 따른 해성 점토지반(marine clay)의 동결속도를 평가하기 위하여 인공동결공법 현장실증시험을 수행하였다. 현장실증시험은 지중에 3.2 m 깊이로 매설된 동결관 1공 내로 초저온 냉매인 액화질소를 순환시키는 방법으로 수행되었다. 또한, 원지반과 인공동결공법에 의해 동결/융해된 지반에 대한 피에조 콘 관입시험(piezo cone penetration test, CPTu) 및 공내재하시험(lateral load test, LLT)을 수행함으로써 동결/융해(freezing-thawing)에 따른 해성 점토지반의 강도 및 강성 특성의 변화를 평가하였다. 시험결과, 부피가 약 $2.12m^3$인 원기둥 모양의 동결체를 형성하는데 총 3.5일이 동안 약 11.9 ton의 액화질소가 소요되었다. 동결/융해에 따른 지반의 강도 및 강성 저하는 각각 48.5%, 22.7%로 산정되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.