• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.6
• /
• pp.1379-1397
• /
• 2013

We consider a system where a licensed radio spectrum is shared by multiple primary users(PUs) and secondary users(SUs). As the spectrum of interest is licensed to primary network, power and channel allocation must be carried out within the cognitive radio network so that no excessive interference is caused to PUs. For this system, we study the joint beamforming and power allocation problem via game theory in this paper. The problem is formulated as a non-cooperative beamforming and power allocation game, subject to the interference constraints of PUs as well as the peak transmission power constraints of SUs. We design a joint beamforming and power allocation algorithm for maximizing the total throughput of SUs, which is implemented by alternating iteration of minimum mean square error based decision feedback beamforming and a best response based iterative power allocation algorithm. Simulation results show that the algorithm has better performance than an existing algorithm and can converge to a locally optimal sum utility.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.689-697
• /
• 2005

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, $B_{10}$ life and its lower bound with $90\%$ confidence at worst case use condition are estimated by analyzing the accelerated life test data.

• Korean Journal of Occupational Health Nursing
• /
• v.26 no.1
• /
• pp.19-29
• /
• 2017

Purpose: The purpose of this study was to define and clarify the concept of reality shock in new graduated nurses. Methods: The hybrid model was used to develop the concept of reality shock. The model included a field study. The participants were 9 newly graduated nurses with a nursing career spanning less than a year. Results: The reality shock in newly graduated nurses was identified to have three dimensions and seven attributes. Specifically: 1) the dimension of performance included two attributes (conflict between theory and practice, and being overwhelmed by the workload), 2) the dimension of relationship included three attributes (loss of support, embarrassment from interference, and relational withdrawal), 3) the dimension of expectations included two attributes(value confusions and incongruity in personal life). Conclusion: Newly graduated nurses' reality shock was defined as a state of incongruence in their entire life that the new nurses experienced owing to value confusions that occurred due to the conflicts between theory and practice in an unfamiliar work environment, getting overwhelmed by the workload, and withdrawing establishing relationships with others due to the loss of support and excessive interference. These findings could help develop intervention strategies to decrease reality shock in newly graduated nurses.

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.138-154
• /
• 2008

The conventional non-dig underground structure building method which made an appearance to reduce the social and environmental costs and maximize the efficiency of the social overhead capital facilities could not help being uneconomical because of many problems such as unnecessary excessive excavation, water leakage, obstacle interference, difficulty of curvilinear application and connection complexity between propelled and injected bodies due to indiscriminate application of small and large circular steel pipes without consideration of the site conditions. The T.S.T.M, in which a protruded square tube is applied as a propulsion and injection body in a design that considered site conditions such as ground condition, depth of soil and live load, was able to be economical as it solved the problems of water resistance, minimization of obstacle interference and curvilinearity, and we can see that it can be applied to all grounds by utilizing or complementing the target ground in terms of engineering. Also in configuring the transverse section, it is possible to not only secure excellent structural safety but also implement all of the above engineering characteristics not only in the square cross section but also in the arch cross section, so it was possible to build structures on any section or ground, and we could confirm the LCC reduction effect and the VE effect.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.303-311
• /
• 2004

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, B$_{10}$ life and its lower bound with 90% confidence at worst case use condition are estimated by analyzing the accelerated life test data.a.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1144-1153
• /
• 2015

The resonant mechanism of reradiation interference (RRI) over 1.7MHz from power transmission lines cannot be obtained from IEEE standards, which are based on researches of field intensity. Hence, the resonance is ignored in National Standards of protecting distance between UHV power lines and radio stations in China, which would result in an excessive redundancy of protecting distance. Therefore, based on the generalized resonance theory, we proposed the idea of applying model-based parameter estimation (MBPE) to estimate the generalized resonance frequency of electrically large scattering objects. We also deduced equation expressions of the generalized resonance frequency and its quality factor Q in a lossy open electromagnetic system, i.e. an antenna-transmission line system in this paper. Taking the frequency band studied by IEEE and the frequency band over 1.7 MHz as object, we established three models of the RRI from transmission lines, namely the simplified line model, the tower line model considering cross arms and the line-surface mixed model. With the models, we calculated the scattering field of sampling points with equal intervals using method of moments, and then inferred expressions of Padé rational function. After calculating the zero-pole points of the Padé rational function, we eventually got the estimation of the RRI’s generalized resonant frequency. Our case studies indicate that the proposed estimation method is effective for predicting the generalized resonant frequency of RRI in medium frequency (MF, 0.3~3 MHz) band over 1.7 MHz, which expands the frequency band studied by IEEE.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1254-1267
• /
• 2015

Recently, excessive installations of APs have caused WLAN interference, and many techniques have been suggested to solve this problem. The AP aggregation technique serves to reduce active APs by moving station connections to a certain AP. Since this technique forcibly moves station connections, the transmission performance of some stations may deteriorate. The AP transmit power control technique may cause station disconnection or deterioration of transmission performance when power is reduced under a certain level. The combination of these two techniques can reduce interference through AP aggregation and narrow the range of interferences further through detailed power adjustment. However, simply combining these techniques may decrease the probability of power adjustment after aggregation and increase station disconnections upon power control. As a result, improvement in performance may be insignificant. Hence, this study suggests a scheme to combine the AP aggregation and the AP transmit power control techniques in OpenFlow-based WLAN to ameliorate the disadvantages of each technique and to reduce interferences efficiently by performing aggregation for the purpose of increasing the probability of adjusting transmission power. Simulations reveal that the average transmission delay of the suggested scheme is reduced by as much as 12.8% compared to the aggregation scheme and by as much as 18.1% compared to the power control scheme. The packet loss rate due to interference is reduced by as much as 24.9% compared to the aggregation scheme and by as much as 46.7% compared to the power control scheme. In addition, the aggregation scheme and the power control scheme decrease the throughput of several stations as a side effect, but our scheme increases the total data throughput without decreasing the throughput of each station.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.713-721
• /
• 1998

The effects of artificial interference on the vegetation landscape in Mt. Nam of Seoul, Korea were clarified by analysing the distribution of vegetation landscape element and the number and size of patch depicted as a vegetation map in terms of landscape ecological principles. The effects of artificial interference on vegetation were also confirmed from the environmental gradient analysis on plant community extended from the lowland to the peak of that mountain. Vegetation landscape elements were divided into plantation and secondary forest in actual vegtation map. The ratio of plantation to secondary forest was higher in the lowland below mid-slope and the southern slope. Most afforested land were occupied by Robinia pseudoacacia and Populus tomentoglandulosa, Pinus rigida, P. koraiensis, Metasequoia glyptostroboides, Alnus hirsuta and so on are localy planted. In addition, projects to replace those afforested trees by P. densiflora as a kind of campaign for "Restoration of the one original feature of Mt. Nam" or to replace those tree species by planting young Abies holophylla or P. koraiensis under the mature afforested trees are also carried out in recent years. In cases of secondary forest, the southern slope was dominated by P. densiflora and the northern one by Q. mongolica. But the lowland of the northern slope is dominated by P. densiflora as the same as that in the southern slope. Vegetation landscape elements in Mt. Nam were much simplified comparing with that of suburban area around Seoul. The number of patches, which reflects the degree of diverse artificial interference was more in the lower area than in the upper area and more in the southern slope than in the northern one. On the other hand, the size of patch showed the antagonistic tendency to that of the number of patch. As a result of environmental gradient analysis, vegetation distribution in Mt. Nam was different from that in suburban area around Seoul. For example, Alnus japonica community, Zelkova serrata community, and Carpinus laxiflora community, which is established in mountain comparatively rare in artificial interference disappeared in Mt. Nam. As a result of analysis on vegetational succession in P. densiflora community and Q. mongolica community, both communities showed a tendency of retrogressive succession differently from that in control site located in suburban area around Seoul. In addition, species composition of P. densiflora and Q. mongolica communities in Mt. Nam were also different from those in Mt. Surak located around Seoul. It was interpreted that those results were originated from the environmental pollution and excessive arti ficial interferences.rferences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3154-3164
• /
• 1996

A major concern in a cellular mobile communication system is how to efficiently utilize the limited amount of frequencies. Various channel assignment methods and traffic sharing schemes have been proposed to improve system performance. However, these approaches suffer from complicated software and hardware requirements due to increased amount of traffic control In this paper, we propose a new method for improving system performance by controlling the powers of the set-up and voice channels of each cell site. We first show that the average number of blocked calls in a system is minimized when the traffic reates are made identical for all cell sites in a system. This result, together with the relationship between the channel powers and the service area, is used to determine the appropriate channel powers of each cell site. We also determine the upper limit on the channel power of each cell site considering co-channel interference and numerically show that the proposed method is effective in reducing the number of blocked calls without an excessive increase in the amount of system control.

• Journal of East-West Nursing Research
• /
• v.17 no.2
• /
• pp.125-131
• /
• 2011

Purpose: In an attempt to investigate causes of runaway impulse in male and female students with runaway impulse experience in high schools, this study was carried out. Methods: The subjects were 195 high school students in Gyeonggi and Incheon area. The data were collected by using the questionnaires. Results: To both male and female students, the main causes of runaway impulse were 'conflicts with parents', 'interference and excessive expectations of parents' and 'burden of study and grades'. In cases of youth with runaway experience by runaway impulse, the major causes of runaway impulse were 'want to have fun with friends' and 'conflicts with parents'. Also shelter and economic difficulties were obstacles that prevent a runaway despite runaway impulse to both male and female students. But in female, the fear and anxiety about runaway were higher barriers than those of male. Conclusion: From the above results, major causes of runaway impulses were relationships with parents, and burden of study. And barriers to prevent a runaway were shelter, economic difficulties to both male and female students.