• 한국재난정보학회 논문집
• /
• 제14권3호
• /
• pp.367-378
• /
• 2018

연구목적: 본 연구는 국내 도심지 굴착시 흔히 마주치는 암반을 포함한 다층토 지반에서 앵커지지 흙막이 구조물의 합리적인 안전관리방법에 대해 서술하는 것을 목적으로 한다. 연구방법: 흙막이 굴착공사의 붕괴사례 현장으로부터 수집한 현장 계측자료를 바탕으로 깊은 굴착시 앵커지지 흙막이벽체의 수평변위속도 관점에서 흙막이 구조물의 안전관리방법에 대해 접근하였다. 연구결과: 붕괴구간의 흙막이벽체 평균 최대수평변위속도는 굴토완료 이후에 뚜렷하게 증가하는 추세를 보였다. 특히, 암반 불연속면을 따라 발생하는 슬라이딩에 의한 흙막이 구조물 붕괴는 비교적 짧은 시간에 상당히 큰 변위속도를 나타냈다. 결론: 본 연구를 통해 굴착공사중 흙막이 구조물 붕괴 사고를 사전에 예측하고 예방하기 위해 국내 현장에서 일반적으로 적용되어온 수평변위에 의한 정량적인 관리기준보다는 수평 변위속도에 의한 안전관리기준의 활용은 흙막이 굴착공사의 안전성을 판단하는데 훨씬 합리적인 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제19권1호
• /
• pp.31-36
• /
• 2018

최근 건축공사가 활성화됨에 따라 기존 구조물과의 근접한 공사 그리고 인접 굴착공사와 병행하여 굴착공사가 진행되는 환경이 증가하고 있지만 이에 대한 연구는 미흡한 실정이다. 본 연구에서는 두 개의 굴착 흙막이 구조물에 대해 기존 굴착 흙막이 구조물과 후속 굴착 흙막이 구조물 간의 상호작용 분석을 위해 수치해석을 수행하였다. 수치해석 분석결과 선행 굴착으로 인해 작용하는 지보재의 하중을 고려하지 않는 경우 구조물에 발생하는 변위는 과소평가 될 수 있는 것으로 분석되었고, 지보재에 작용하는 응력은 과하게 평가되어 실제 지반의 거동을 모사하기 위해서는 선행굴착으로 인해 발생하는 지보재 응력을 고려해야 하는 것으로 분석되었다.

• 지질공학
• /
• 제29권3호
• /
• pp.289-302
• /
• 2019

최근 굴착현장 인근의 지반함몰 발생사례가 증가함에 따라 사전에 지반함몰 가능성을 예측할 수 있는 연구가 진행되고 있다. 본 연구에서는 기존 연구에 의해 개발된 굴착 전 지반함몰 위험등급 평가 시트인 GSRp를 실제 굴착 현장에 적용하여 현장 적용성을 검증하였다. 각각 다른 지반조건을 가진 5개 굴착현장에 대하여 지반함몰 위험등급을 평가한 결과, GSRp 점수는 40~79점으로 산출되어 대부분 II등급(우수지반)~III등급(양호지반)으로 분류되었다. 평가방법의 신뢰성 검증을 위하여 계측결과에 의해 실측된 수평변위량과 비교 분석하였다. 본 연구현장의 수평변위량은 허용치의 25~47%로 나타나 지반함몰 위험이 낮게 평가된 GSRp 결과와 일치하였다. 향후 지반함몰 위험성이 높은 불량한 지반을 대상으로 하는 현장 적용에 대한 연구가 진행되어 검증과 보완이 이루어진다면 GSRp 평가방법이 굴착 전 지반함몰 위험도를 예측하는 평가 도구로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.139-148
• /
• 1994

Rapid industrialization and urbanization caused by the high economic growth of the country requires optimization of land usage as well as the expansion of underground space. Therefore the construction of large and deep basements is inevitable in built up areas where the braced excavation for earth retaining structures may create many problems such as settlement and damages of nearby buildings and underground utilities. In this work, some of major influential factors concerning the stability of braced excavation are investigated and the results are compared with the field observation results. The ground water table, applied strut forces, horezontal wall displacement, infilling materials in the rock joints were found to be the most critical factors influencing the stability of braced walls constructed in the layered ground. Magnituide and type of the wall deformation was closely related to the pattern of the surface settlement. The stability of braced walls are described in terms of strut forces.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.139-146
• /
• 1999

Geological and geotechnical surveys, in general, should precede the excavation to ensure the stability of the tunnel md should be followed up according to the various geological condition during the excavation. However actually the standard support patterns which were decided during the design phases used be insisted for the whole excavation phases in spite of the various geological conditions. When $\bigcirc$$\bigcirc$ tunnel was excavated up to 25m long, the severe displacement was generated in the Portal area of $\bigcirc$$\bigcirc$ tunnel and the tunnel face was pally collapsed. Therefore, this paper present the case study on construction associated with the Umbrella Arch Method used in silty ground by the NATM.

• 한국지반공학회지:지반
• /
• 제9권1호
• /
• pp.59-68
• /
• 1993

In deep excavations for creation of underground spaces, it would be difficult to predict earth pressure, especially multilayered ground including rock strata. The earth pressures and displacements on the retention walls are measured by load cell, strain gauge and inclinometer which were installed at struts or anchors at 4 deep excavation sites in Seoul area. In this paper, the measured earth pressure from the struts or anchors are compared with Peck's empirical values, and the coefficient of the earth pressures for each strata and horizontal wall displacement are investigated. The coefficient of earth pressure distribution, a(0.65zka), in the flexible and the rigid walls was about 74% and 88% of Peck's value respecitively. The measured earth pressure distributions for the 4 sites showed about 70%∼80% of Peck's empirical values and the average earth pressure coefficients based on the measured data were 0.3 for the felted layer, 0.23 for the weathered rock and 0.19 for the weak rock. The maximum w리1 displacements were found to be less 0.2% of excavation depth.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.247-249
• /
• 2009

Electric pole construction of distribution place is mainly operated by excavation work using auger crane and backhoe. Even though construction quality is affected by electric pole construction method and amount of excavation, construction is operated by workers' convenience in most of construction place. Therefore, in this paper, we analyze and compare effectiveness of electric pole quality using auger crane and backhoe when mechanized excavation through displacement experience of electric pole with ground strength.

• 한국안전학회지
• /
• 제12권3호
• /
• pp.139-146
• /
• 1997

In this study, centrifugal model tests were performed to investigate the behavior of excavated earth retaining wall with the depth of excavation and different types of wall(aluminum, steel panel). Jumunjin standard sand was used for foundation soil. The raining method was adopted to form the required relative density of the model ground. The lateral earth pressure measured from tests were compared with estimated active earth pressure by Rankine's theory. The test results have shown that the earth pressure acting on the retaining wall and the rotation displacement of the wall are influenced by the depth of excavation and the type of wall. It was found from the test results that the deformation of the wall increases with the depth of excavation.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.984-989
• /
• 2008

Hydraulic excavators have been one of the most popular devices in the various industries for construction, forestry and agriculture etc. Because the excavators generally work in poor environment, the various organizations study to automate those. In this paper, a hydraulic simulation for evaluation of automatical excavation system is presented. It is using the AMESim based on the 1.5 ton excavator with fixed displacement pumps, and operated by signals those control pilot pressure to spools of the main control valve. The main control valve is regarded that only consists of boom, arm and bucket. This simulation program is expected to apply to evaluation of the controller for automatic excavation system and to estimate of effect in accordance with change of some components or parameter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1317-1323
• /
• 2009

A finite element analysis was performed for new earth retention system that is a kind of truss tower with non-supported excavation. A 2D finite element model was adopted in this study to investigate the behavior of the earth retention system. Just because this non-supported truss tower system is too complex to model in 2D plain-strain condition to itself, so have to simplify it by the conception of equivalent rigidity. The horizontal displacement of the wall and lateral earth pressure distribution on the wall were computed. And it is compared with NAVFAC design manual.