• 한국터널지하공간학회 논문집
• /
• 제2권2호
• /
• pp.41-49
• /
• 2000

지하 터널 굴착 등의 암반 공학적 문제에 있어서 암반분류가 널리 적용되고 있다. 하지만, 조사 방법이 체계화되어 있지 않아서 터널 지질 전문가라 할지라도 암반분류에 어려움이 많은 문제점을 가지고 있다. 본 연구에서는 다변량분석을 이용하여 객관적이고 사용하기 간편한 암반분류법을 제시하였다. RMR 요소는 RQD, 절리상태, 지하수, 강도, 보정, 절리간격 순으로 중요도가 결정되었으며, 각각의 단계에서 RMR에 관한 최적의 다중회귀모형식을 제시하였다.

• 유기물자원화
• /
• 제9권1호
• /
• pp.109-118
• /
• 2001

사후관리단계에 있는 폐기물매립지에서는 매립쓰레기의 안정화 정도를 실측조사하여 파악하기 어려운데 굴착조사를 하면 최종복토층이 손상되기 때문이다. 이러한 문제를 해결하고자 본 연구에서는 침출수 및 매립가스를 이용하여 매립쓰레기의 분해정도를 평가하는 방법을 개발하고 난지도매립지를 대상으로 적용해 보았다. 그 결과 난지도매립지의 매립쓰레기는 2000년까지 분해가능폐기물 기준 54%, 이분해성물질 기준 70%가 분해되었으며, 대부분이 가스상태로 전환된 것으로 분석되었다. 본 연구에서는 이러한 결과는 생화학적 안정화지수로 활용하고, 매립지의 생물학적 분해조건이 변화되었을 때 반영하는 방법도 제시하였다.

• 한국재난정보학회 논문집
• /
• 제4권2호
• /
• pp.10-27
• /
• 2008

When the ground is excavated adjacent to the existing tunnel, which is loaded by the surcharge on the ground surface, the tunnel stability would be very sensitive to the deformation of the ground induced by the horizontal displacement of braced wall. The stability of the existing surcharged tunnel could be controlled by pre-loading on the braced wall. In this paper, it was investigated, if it would be possible to keep the existing surcharged tunnel stable by preventing the horizontal displacement of a braced wall by imposing the pre-loading during the ground excavation. For this purpose, large scale model tests were performed in a scale 1/10 at the test pit which was 2.0m in width and 6.0m in height and 4.0m in length. Isotropic test ground was constructed homogeneously by wet sand. Model tunnel was constructed in the test ground. Surcharge was loaded on the ground surface above the tunnel. During the tests, the behavior of model tunnel and model braced wall was measured. Numerical analyses were also performed in the same condition as the tests. And their results were compared to that of the model tests. Consequently, the effect of a surcharge could be compensated by imposing the pre-loading on the braced wall. The existing tunnel and the braced wall could be kept stable by preventing the horizontal displacement of the braced wall through pre-loading, although the tunnel is surcharged.

• 한국재난정보학회 논문집
• /
• 제4권2호
• /
• pp.138-154
• /
• 2008

The conventional non-dig underground structure building method which made an appearance to reduce the social and environmental costs and maximize the efficiency of the social overhead capital facilities could not help being uneconomical because of many problems such as unnecessary excessive excavation, water leakage, obstacle interference, difficulty of curvilinear application and connection complexity between propelled and injected bodies due to indiscriminate application of small and large circular steel pipes without consideration of the site conditions. The T.S.T.M, in which a protruded square tube is applied as a propulsion and injection body in a design that considered site conditions such as ground condition, depth of soil and live load, was able to be economical as it solved the problems of water resistance, minimization of obstacle interference and curvilinearity, and we can see that it can be applied to all grounds by utilizing or complementing the target ground in terms of engineering. Also in configuring the transverse section, it is possible to not only secure excellent structural safety but also implement all of the above engineering characteristics not only in the square cross section but also in the arch cross section, so it was possible to build structures on any section or ground, and we could confirm the LCC reduction effect and the VE effect.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.368-375
• /
• 2009

This paper describes field installation and load test results performed for three types of micropiles in the process of developing a new micropiling method. Field tests were performed for two conventional types(i.e., micropile reinforced with steel bar and gravity grouting, micropile reinforced with steel bar and steel casing and gravity grouting) and a proposed type(i.e., micropile reinforced with hollow steel pipe wrapped with geotextile-pack and pressurized grouting). The load test results subjected to axial compression and tension and lateral loading conditions are described in this paper. The micropiles were exposed in the air in order to verify the installation quality and curing condition of grouting material via ground excavation. Axial compression and tension test results indicate that the new micropile type provide at least 40% higher bearing capacity than that of conventional types. Based on the examination of exposed piles, it is induced that the proposed method, packed micropile, provides better interlocking between grouts and surrounding soils and increases higher frictional resistance comparing to conventional types.

• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.99-106
• /
• 2013

본 연구에서는 일반국도 상에 존재하는 2종 비탈면 104개소에 대해 상태평가 항목과 상태평가 등급의 연관성을 분석하고, 평가항목을 고려한 다중회귀분석을 통해 안전등급을 예측할 수 있는 회귀모형을 제시하였다. 분석결과, 사면경사와 강우 및 지하수의 평가항목은 상태평가 등급과의 연관성이 낮은 것으로 분석되었다. 또한, 다중회귀분석을 통해 제시된 회귀모형은 절취상태, 강우 및 지하수의 항목을 판단하기 어려운 조건에서 활용이 가능한 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제5권6호
• /
• pp.499-517
• /
• 2013

In order to investigate shear behavior of granular materials due to excavation and associated unloading actions, load-controlled plane strain compression tests under decreasing confining pressure were performed under drained conditions and the results were compared with the conventional plane strain compression tests. Four types of granular material consisting of two quartz sands and two glass beads were used to investigate particle shape effects. It is clarified that macro stress-strain behavior is more easily influenced by stress level and stress path in sands than in glass beads. Development of localized deformation was analyzed using photogrammetry method. It was found that shear bands are generated before peak strength and shear band patterns vary during the whole shearing process. Under the same test condition, shear band thickness in the two sands was smaller than that in one type of glass beads even if the materials have almost the same mean particle size. Shear band thickness also decreased with increase of confining pressure regardless of particle shape or size. Local maximum shear strain inside shear band grew approximately linearly with global axial strain from onset of shear band to the end of softening. The growth rate is found related to shear band thickness. The wider shear band, the relatively lower the growth rate. Finally, observed shear band inclination angles were compared with classical Coulomb and Roscoe solutions and different results were found for sands and glass beads.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.108-116
• /
• 2004

After the IMF financial crisis, a lot of risks in construction industry have been increased gradually with the expansion of construction industry widely, higher stories of building, and the expansion of the underground space and excavation work. These risks are bringing out construction accidents such as the death, the injury of worker and so on, not so much as it would be effected the corporation's image. In spite of these situations, many construction industries still maintain the wrong methods and not try to decrease construction accidents. Recently, we should focus on the fact that management system of the larger construction also is being good, on the other hand, the condition of the work in the case of smaller construction industries is very poor, construction company have a particular safety management system but it has a difference according to the construction magnitude, construction companies have a particular safety management system but it has a difference depending on the construction according to the construction magnitude. Therefore, this study will suggest the developed way of construction safety management by the comparison and analysis from the difference between the higher and the smaller construction industries.

• 터널과지하공간
• /
• 제17권2호
• /
• pp.102-108
• /
• 2007

일반적으로 암판정을 수행하기 인해 가장 널리 사용되는 방법은 암석의 강도와 절리의 발달빈도를 고려하는 것이다. 하지만 미세균열과 연장성이 긴 절리들이 암반에 존재하고 있는 경우에는 이러한 방법이 합리적이지 않다. 그러므로 복잡한 지질조건을 가지고 있는 암반에서의 굴착난이도 결정은 절리빈도와 실내시험(일축압축강도, 점하중강도, 실내탄성파속도 등)과 현장탄성파속도와의 상관관계를 종합하여 암판정을 수행하는 것이 더욱 더 합리적이라고 판단된다.

• Parasites, Hosts and Diseases
• /
• 제54권5호
• /
• pp.617-623
• /
• 2016

An excavation of the Vesakoyakha II-IV and Nyamboyto I burial grounds was conducted during the 2014 field season, and soil samples from intact burials dating from the 19th and 20th centuries, respectively, were analyzed to determine interactions between parasites and host/vectors. Considering the discovery of Diphyllobothrium sp. and Taenia sp. eggs in soil samples from the pelvic region, diphyllobothriasis was the most frequent helminthic infection among the Taz Nenets. The Nyamboyto Nenets mainly consumed uncooked fish, while the Vesakoyakha Nenets had a bigger variety in food choices, including reindeer meat. Nenets children were given raw fish from early childhood. The paleoparasitological results corroborate rare ethnographic records about the consumption of uncooked reindeer cerebrum which led to beef tapeworm helminthiases. This is the first parasitological report of helminthic diseases among the Taz Nenets, and, as such, it provides insight into their subsistence activities and food patterns and broadens our understanding of their health condition.