• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.133-143
• /
• 2007

For the better success in the society, it is important to collect opinions from members. The progress was slow before because it was hard to collect the opinions from each member. But since we have opened the web site it gets easier to evolve with the society for microsurgery, and expect to have active participations from the members. We make 20 questions in three different groups. The researches are made on participation, development in science council that starting from 2005 October to 2007 June, education on training with member's preference to thesis and individuality and suggestion. Thus we have results following to that research. 1.75% of the members vote for the lecture has to be substantial, and also want the atmosphere of the council to be more sincere. 46.2% of members want the council to be not only exchange information but also the place to experience the social intercourse. 2. When the thesis is present and submitted that will also connect to main society. It will be counted as equal as board thesis, only if the thesis can count in both plastic & reconstructive surgery and orthopedic surgery. Then it will be scored as same as examination of board, and will be a receipt of paper by home page 3. The information-oriented project on our council is slower than what members expected. 100% of members voted yes to online thesis examination, and 66.7% of members voted for preference of web site. We need to make improvements on our web pages as soon as possible such as online payment with credit card. 4. According to the result of questionnaire, our web site helps member's participation in council and eventually become a bridge between members. We hope the questionnaires would help us to develop the council and eventually would help us to society with each other in the council. We also hope this council would be the one that connect all of us in society.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제37권1호
• /
• pp.101-114
• /
• 1998

In this thesis, We tried to introduce definite integration to the curriculum of high school mathematics with numerical integration, which had been introduced with quadrature method. For this purpose, We used new experimental mathematics approaches, so-called investigation and examination. In chapter II, We examined how much computers had been used in teaching mathematics. In chapter III, We presented the theoretical background of approximation integration within numerical integration. In chapter IV, We studied and compared various methods of numerical integration, and examined the relation between curvature of a curved line and numerical integration. In order to study more easily, We used some of computer programs. We hope that this thesis will be a turning point in developing new teaching methods and improving curriculum of mathematics in high school.

• 철학연구
• /
• 제93호
• /
• pp.121-148
• /
• 2011

반이론주장의 조직불가능성명제는 윤리적 이론화의 불가능성에 대한 대표적인 근거이다. 특수주의가 강하게 반영된 이 명제를 통해 반이론가들은 구체적인 도덕적 상황에서 개개 행위자들이 내리는 결정들은 도덕원칙으로 조직화될 수 없기 때문에 윤리적 이론화는 불가능하다고 주장한다. 조직불가능성명제의 적절성은 이론적 차원에서 조직화의 대상이 도덕적 실제인지 아닌지의 쟁점을 통해, 그리고 실천적 차원에서 도덕원칙으로부터 도덕적 추론이 연역되는지 아닌지의 쟁점을 통해 검토될 수 있다. 먼저 실천적 숙고의 성격은 도덕적 실제 그 자체가 아니라 도덕적 실제를 넘어서는 도덕성이 조직화의 대상이라는 도덕이론가들의 주장을 뒷받침해준다. 또한 반이론가들의 비판과 달리 도덕이론가들은 도덕적 추론을 위해서 도덕원칙이외에도 상황적 지식과 행위자의 지혜에 근거한 도덕판단이 필요하다고 본다. 도덕이론가들은 다양한 도덕적 실제를 반영하는 행위자의 판단이 도덕성을 제시하는 도덕원칙을 통해 검토되고 이에 근거하여 도덕적 지위를 갖게 되는 형태의 윤리학을 추구한다. 결국 도덕이론가들은 복잡하고 다양한 도덕적 실제를 도덕원칙으로 조직화하거나 도덕원칙만으로 도덕적 추론이 가능하다고 주장하지 않기 때문에 조직불가능성명제를 통해 윤리적 이론화가 불가능하다는 것을 주장하려는 반이론가들의 시도는 성공적이지 못하게 된다.

• 한국주거학회논문집
• /
• 제15권6호
• /
• pp.77-88
• /
• 2004

The Building Design Control Commission has various important roles as the final check point for the overall urban management. Although nobody can argue that the committee is useless, participants' assessments on the results of the introduction and operation of the Building Design Control Commission are diversified. The primary purpose of this thesis lies in the institutional examination of the contents related with Building Design Control Commission by using the literature inquiry. The second purpose is to provide a help for the improvement of discussion of the administrative structure and improvement of the urban aesthetic through the systematic analysis of Building Design Control System. The extent of space is selected according to the case of building planning deliberation of Jeju-Si as the axis of Free International City, the center of administration, education, and culture. The period of time of examination is from January, 2002 to December, 2002. The subject of study is apartment which is deeply related with our lives by analyzing 2,231 discussion cases.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.203-208
• /
• 2009

Lacks of harmony of a person and machine according to productivity elevation pursuit is happened by enterprise common problem in Global competition age and productivity loss is caused being connected to worker's burden work. Burden work in PET bottle production Process which are arrangement, Packing, interior inspection is analyzed by Ergonomic analysis technique. REBA estimation point(10~11 points) means the high step of hazard on worker's burden. It is immediately required the improvement on the process. This thesis show you the improving methods like package, examination justice.

• PNF and Movement
• /
• 제10권1호
• /
• pp.53-59
• /
• 2012

Purpose : This thesis aims to explore sports physical therapist program of university of education of korea and usa for the whole process of becoming sports physical therapist and provide better education programs for cultivating sports physical therapist in the future. Methods : This thesis education programs of physical therapy department in Korea and 3 universities in east california region were selected with recommendation of a professional on sports physical therapist in USA. for the purpose of this study, curriculum of physical education department at school of education was analyzed using internet survey, phone survey, visitor survey and examination of hand book in korea. in usa, homepage, internet survey, e-mail and examination of handbook were used to analyze the data. Results : First, the results of this study can be summarized as follows: second, In comparison of required subjects and selective subject of physical therapy education in Korea and USA, Korea presents the least required subjects for major while USA offer more required subjects for majors. Korea puts focus on education practice while USA offers initial field experience and education practice well connected and organized systematically. Third, comparison of system of professional sports physical therapist, Korea did not establish system of a professional sports physical therapist, USA systematically established system of a professional sports physical therapist. Conclusion : On the basis Professional physical therapist, PNF association has to need to study hardly about special therapist.

• 디자인학연구
• /
• 제6권1호
• /
• pp.23-46
• /
• 1993

The development of technology in modern industrial world which grows and changes every day is shortening the cycle of life span of products, so there is a flood of products around us. It is enough to say that this phenomenon leads to further emphasis on the aspect of design for human being. It is not a new fact that to design for the rational function and the modeling from to make a combination and to satisfy consumers' desire is a short cut to gain competitive superiority in developing new products for MIS security. Therefore the design which plays a leading role in the activity of creating more convenient, more aesthetic, and more econemical products is called 'NEW CORPORATE WEAPON'. The amount of effort made for developing products is different in each company, but recently the plan to develope new products and its process arouse more interest. This thesis purports to improve objective understanding about the development of design by investigating products development research and the process of analysis and designing as a case study on developing a domestic supersonic humidifier. This thesis consists of five chapters in all. In chapter one as a preface, the purpose the method and the scope of the study is described. Chapter two contains my effort to grasp the background of study on the design and the basic structure of supersonic humidifier. Chapter three is an examination into the present conditions of supersonic humidifier used in domestic and foreign area, and the shape of design. In chapter four, a guide for the development of design is established. The idea sketch based on a fundamental shape and the drawing are added to this. In chapter five on the basis of the result of analysis in the preceding research I describe the development of design of products on the premise that marketing gives proof for them but the products oriented by manufacturer are not included in this case. In this thesis, I try to recognize the process of the develpment of design and the importance of the plan for design in developing products by examining an investigative and analytic study on the design of products.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2004년도 춘계 학술대회지
• /
• pp.42-50
• /
• 2004

Societies are important sources of new information for users. However, most of these societies still rely on traditional, or rather ancient methods for gathering and servicing the information. Furthermore, most of the societies are trying to electrify processes such as managing members and paper submission as well as the process managing the information for service but are limited due to financial and technical reasons. Therefore, KISTI(Korea Institute of Science and Technology Information) has developed the ${\ulcorner}$KISTl-ACOMS (KISTI-Article Contribution Management System)${\lrcorner}$ as part of the national project for automating the process of processing academic information by societies, in order to convert journals published by academic societies in Korea into an electronic form and make them accessible on the Internet. This system has been developed in the year 2001 and has since been distributed to societies free of charge. The number of societies requesting the service has risen recently, which prompted us to take more recommendations of the societies that adopt this system into account in expanding and standardizing the area of service being provided by the system.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.504-510
• /
• 2003

Societies are important sources of new information for users. However. most of these societies still rely on traditional. or rather ancient methods for gathering and servicing the information. Furthermore. most of the societies are trying to electrify processes such as managing members and paper submission as well as the process managing the information for service but are limited due to financial and technical reasons. Therefore. KISTI(Korea Institute of Science and Technology Information) has developed the $\mathbb{\ulcorner}$ KISTI-ACOMS(KISTI-Article COntribution Management System)$\mathbb{\lrcorner}$ as part of the national project for automating the process of processing academic information by societies. in order to convert journals published by academic societies in Korea into an electronic form and make them accessible on the Internet. This system has been developed in the year 2001 and has since been distributed to societies free of charge. The number of societies requesting the service has risen recently. which prompted us to take more recommendations of the societies that adopt this system into account in expanding and standardizing the area of service being provided by the system.

• 한국발생생물학회지:발생과생식
• /
• 제14권4호
• /
• pp.307-316
• /
• 2010

본 논문의 목적은 생명공학 기술에 대한 찬성 또는 반대 의견에 대한 가치체계의 근간을 스노우(C. P. Snow)의 '두 문화' 문제 - 과학문화와 인문문화 - 개념을 모티브로, 목적론적 윤리설과 의무론적 윤리설, 전통우생학과 자유주의 우생학 등 가치선택의 다양한 갈래가 공존하고 있음을 논하는데 있다. 또한, 과학과 생명공학 기술에 대한 '잘못된 신화'- 과학의 객관성에 대한 신화, 과학과 과학자의 독립성과 자율성, 생명공학 기술의 세계기아 해결 - 를 지적함으로써 과학기술에 대한 적확한 판단을 모색하고 있다. 마지막으로, 생명공학 기술의 생산주체인 생명공학자에게 연구윤리와 사회적 책임은 물론 개방성, 도덕적 민감성과 상상력, 성찰과 품성의 윤리학을 요구하고 있다.