• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.31.4-32
• /
• 2016

Observing the solar atmosphere with ground-based telescopes in the near-infrared has a number of advantages when compared to classical measurements in visible wavelengths. One of them comes from the magnetic sensitivity of spectral lines, which varies as ${\lambda}_g$, where g is the effective $Land{\acute{e}}$ factor of the transition. This wavelength dependence makes the near-infrared range adequate to study subtle spatial or temporal variations of the magnetic field. Spectral lines, such as the photospheric Fe I $1.5648{\mu}m$ spectral line, with a $Land{\acute{e}}$ factor g=3, have often been used in the past for this type of studies. To study the chromosphere, the Ca II IR triplet and the He I $1.0830{\mu}m$ triplet are the most often observed lines. The latter has the additional advantage that the photospheric Si I $1.0827{\mu}m$ is close enough so that photosphere and chromosphere can be simultaneously recorded with a single detector in a spectrograph. The instrument TIP (Tenerife Infrared Polarimeter) has been continuously operating since 1999 at the 70-cm German VTT of the Observatorio del Teide and has been recently moved to the 1.5-m German GREGOR. During all this time, results have been obtained concerning the nature of the weak photospheric magnetic field of the quiet sun, magneto-acoustic wave propagation, evolution with the cycle of sunspot magnetic fields, photospheric and chromospheric magnetic field in emerging regions, magnetic field in chromospheric structures such as filaments, prominences, flares, and spicules, etc. In this talk, I will review the main results obtained after all these observations and mention the main challenges for the future. With its novel polarization-free design and a complete suite of instruments aimed at simultaneous (imaging and spectroscopic) observations of the solar photosphere and chromosphere, the EST (European Solar Telescope) will represent a major world-wide infrastructure to understand the physical nature of all these phenomena.

• Knowledge Management Research
• /
• v.6 no.2
• /
• pp.1-22
• /
• 2005

Knowledge is recognized as the most important asset among enterprises. Therefore, the necessity of knowledge management is ever on the increase nowadays. While many people have endeavored to develop knowledge storage, sharing and usage, knowledge creation is not sufficiently investigated for practical application, because knowledge creation is largely related to creativity and difficult to establish a systematic methodology. In order to overcome such problems, the creative knowledge creation model is proposed by using the whole brain theory and creative thinking tools. First of all, the creative knowledge creation model is based on the Nonaka's knowledge creation model integrated with the whole brain theory. The whole brain theory is then used as a standard to organize a whole brain team that is composed of members who have diverse thinking patterns. For creative thinking tools, the mandal-art and the contradiction matrix of TRIZ are used for a knowledge conversion. Each process of the creative knowledge creation model is sequentially suggested and several terms are defined. In order to verify the effectiveness of the creative knowledge creation model, the proposed model is applied to the development of a dishwasher with a new concept. According to the order of the proposed method, the model is applied twice in the cycle of spiral evolution. Three kinds of dish-washing methods have been developed using the proposed model. The results of the application are then analyzed and presented.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2013.11a
• /
• pp.30-31
• /
• 2013

Land use and land cover change (LULCC) due to human activities directly affects natural systems and contributes to changes in carbon exchange and climate through a range of feedbacks. How land use and land cover changes affect carbon exchanges can be assessed using multiyear measurement data from micrometeorological flux towers. The objective of the research is to assess the impact of land use and land cover change on carbon exchange in a heterogeneous cropland area. The heterogeneous cropland area in Haenam, South Korea is also subjected to a land conversion due to rural development. Therefore, the impact of the change in land utilization in this area on carbon exchange should be assessed to monitor the cycle of energy, water, and carbon dioxide between this key agricultural ecosystem and the atmosphere. We are currently conducting the research based on 10 years flux measurement data from Haenam Koflux site and examining the LULCC patterns in the same temporal scale to evaluate whether the LULCC in the surrounding site and the resulting heterogeneity (or diversity) have a significant impact on carbon exchange. Haenam cropland is located near the southwestern coast of the Korean Peninsula with land cover types consisting of scattered rice paddies and various croplands (seasonally cultivated crops). The LULCC will be identified and quantified using remote sensing satellite data and then analyzing the relationships between LULCC and flux footprint of $CO_2$ from tower flux measurement. We plan to calculate annual flux footprint climatology map from 2003 to 2012 from the 10 years flux observation database. Eventually, these results will be used to quantify how the system's effective performance and reserve capacity contribute to moving the system towards more sustainable configuration. Broader significance of this research is to understand the co-evolution of the Haenam agricultural ecosystem and its societal counterpart which are assumed to be self-organizing hierarchical open systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1558-1564
• /
• 2019

Corporate business clusters create a borderless business network through value chains and value creation activities. Clusters in the IT sector are crossing regional boundaries because of their rapid technological development and short product life cycle. To investigate this phenomenon, we examined the value activities of IT companies. As a result, the global expansion of the case companies was limited, but they had business clusters that exceeded the regional boundaries. However, because the order of business clusters is not advanced, value activities are focused on productivity rather than innovation. Given the rapidly evolving nature of IT, it is necessary to evolve into a business cluster that can create new value. Companies must design and implement value-creating processes to develop new technologies or enter new markets, which can lead to cluster growth. Companies must design and implement value-creating processes to develop new technologies or enter new markets, which can lead to cluster growth.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.375-384
• /
• 2022

The shipping industry is cyclically impacted by complex variables such as various economic indicators, social events, and supply and demand. The purpose of this study was to analyze the operating profit of 13 Korean liner companies over 30 years, including the financial crisis of the late 1990s, the global financial crisis of the late 2000s, and the COVID-19 global pandemic. This study was conducted to also identify factors that impacted the profit ratio of Korea's liner shipping companies according to economic conditions. It was divided into ocean-going and short-sea shipping, reflecting the characteristics of liner shipping companies, and was analyzed by hierarchical multiple regression analysis. The time series data are based on the Korean International Financial Reporting Standards (K-IFRS) and comprise seaborne trade volume, fleet evolution, and macroeconomic indicators. The outliers representing the economic downturn due to social events were separately analyzed. As a result of the analysis, the China Container Freight Index (CCFI) positively impacted ocean-going as well as short-sea liner shipping companies. However, the Korean container shipping volume only impacted ocean-going liners positively. Additionally, world and Korea's GDP, world seaborne trade volume, and fuel price are factored in the operating profit of short sea liner shipping. Also, the GDP growth rate of China, exchange rate, and interest rate did not significantly impact both groups. Notably, the operating profitability of Korea's liner shipping shows an exceptionally high rate during the recessions of 1998 and 2020. It is paradoxical, and not correlated with the classical economic indicators. Unlike other studies, this paper focused on the operating profit before financial expenses, considering the complexity as well as difficulty in forecasting the shipping cycle, and rendered conclusions using relatively long-term empirical analysis, including three economic shocks.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.593-599
• /
• 2017

In order to enhance ultra battery performances, the electrochemical characteristics of nano Pb/AC anode composite was investigated. Through nano Pb adsorption onto activated carbon, nano Pb/AC was synthesized and it was washed under vacuum process. The prepared anode materials was analysed by SEM, BET and EDS. The specific surface area and average pore size of nano Pb/AC composite were $1740m^2/g$ and 1.95 nm, respectively. The negative electrode of ultra battery was prepared by nano Pb/AC dip coating on lead plate. The electrochemical performances of ultra battery were studied using $PbO_2$ (the positive electrode) and prepared nano Pb/AC composite (the negative electrode) pair. Also the electrochemical behaviors of ultra battery were investigated by charge/discharge, cyclic voltammetry, impedance and rate capability tests in 5 M $H_2SO_4$ electrolyte. The initial capacity and cycling performance of the present nano Pb/AC ultra battery were improved with respect to the lead battery and the AC-coated lead battery. These experimental results indicate that the proper addition of nano Pb/AC into the negative electrode can improve the discharge capacity and the long term cycle stability and remarkably suppress the hydrogen evolution reaction on the negative electrode.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.77-85
• /
• 2002

The objective of this study was to evaluate the performances of the ASBR under critical conditions of solid-liquid separation, caused by extremely high solids concentration, for wider application of the ASBR to various wastes. The ASBRs and completely-mixed daily-fed control runs were operated using a municipal mixed sludge at 35$^{\circ}C$ and 55$^{\circ}C$. Conversion of completely-mixed daily-fed reactor to sequencing batch mode and changes in HRT of all ASBRs were easily achieved without adverse effect, regardless of digestion temperature. Solids accumulation was remarkable in the ASBRs, and directly affected by settleable solids concentration of the feed sludge. Noticeable difference in solids-liquid separation was that flotation thickening occurred in the mesophilic ASBRs, while gravity thickening was a predominant solid-liquid separation process in the thermophilic ASBRS. Solids profiles at the end of thickening step dramatically changed at solid-liquid interface, and slight difference in solids concentrations was observed within thickened sludge bed. Organics removals based on subnatant or supernatant after thickening always exceeded 80% in all reactors. Thickened sludge volume and gas production of the ASBRs affected mutually. Gas production increased as thickened sludge accumulated, and continuous gas evolution during thickening could cause thickened sludge to expand or resuspend. Thickened sludge volume exceeding a predetermined withdrawal level resulted in loss of organic solids as well as biomass during withdrawal step, leading to decrease in gas production ind SRT. Such an adverse mutual effect was significant in gravity thickening, while it was not sensitive in flotation thickening. Changes in organic loading had no significant effect on organic removals and gas production after build-up of solids in the ASBRs.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.111-116
• /
• 2002

Electrochemical scanning tunneling microscopy was employed to study the evolution of surface morphology during electrochemical preparation of Si(111)-H from Si(111) oxide. Anodic dark current of cyclic voltammogram in 0.2M $NH_4F$ solution (pH 4.7) decreased as the number of cycles increased and remained nearly constant after the second cycle. Then, the Si(111) oxide was entirely stripped, which was followed by H termination on the Si(111) surface. Hydrides at kink and step sites were etched more rapidly than on the terrace, which remained triangle pits with [112] oriented steps where existed stable monohydride. Then, triangle pits deepened. During chronomamperometry at 0.4V anodic dark current shoulder appeared and decreased slowly, indicated the stripping of Si(111) oxide and the formation of stable (112) oriented steps with monohydride. Additionally, the etching mechanism of Si(111)-H in 0.2M $NH_4F(pH 4.7)$ solution at +0.4V was discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.9
• /
• pp.901-915
• /
• 2012

This study comparatively analyzes the characteristics, changes, and differences in class-based costume typology according to a concept of $17^{th}$ and $18^{th}$ century common people in France. The methods and contents are as follow. First, the scope of common people is grasped according to the historical background and a concept of $17^{th}$ and $18^{th}$ century common people in France. Second, through considering a prior research on analyzing the data of ancient documents on the economy of clothing, it classifies common people into bourgeoisie, urban common people, rural common people, and the destitute. It then examines diachronic evolution, and class-based synchronic difference in the consumption of $17^{th}$ and $18^{th}$ century common people's costumes in France. Third, it analyzes the appearance frequency by period according to type of common people's costumes, which were shown in pictorial materials with 283 sheets of engravings and 54 pieces of paintings; in addition, it reconstructs the succession and expansion in typology. It grasps differences and changes in morphology by class, space, and period of typology for common people's costumes. Common people's consumption of costumes was understood to have grown in qualitative aspects as well as a rise in the whole clothing demand. A class-based structure formed and indicated that a fashion cycle existed. As a result of analyzing common people's clothes (shown in pictorial materials of the $17^{th}$ and $18^{th}$ century) 41 items were grasped by gender and according to costume kind. Typology in common people's costumes (classified into bourgeoisie, urban common people, rural common people, and the destitute) showed a change by period. A change in typical costume typology was accepted more by the bourgeoisie than by urban and rural common people, and was accepted more by rural communities than by urban populations. Thus, a difference was formed through an expansion with a temporal difference that depended on class and space.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.290-298
• /
• 2018

Herein, an S-band internally-matched power amplifier that shows a power capability of 300 W in a Long Term Evolution(LTE) band 7 is designed and fabricated using a CGHV40320D GaN HEMT from Wolfspeed. Based on the nonlinear model, the optimum source and load impedance are extracted from the source-pull and load-pull simulations at the fundamental and harmonic frequencies, and the harmonic impedance tuning circuits are implemented inside a ceramic package. The internally matched power amplifier, which is fabricated using a thin-film substrate with a high relative permittivity of 40 and an RF35TC PCB substrate, is measured at the pulsed condition with a pulse period of 1 ms and a duty cycle of 10%. The measured results show a maximum output power of 257~323 W, a drain efficiency of 64~71%, and a power gain of 11.5~14.0 dB at 2.62~2.69 GHz. The LTE-based measurement shows a drain efficiency of 42~49% and an ACLR of less than -30 dBc(excluding 2.62 GHz) at an average power of 79 W.