Abstract
Herein, an S-band internally-matched power amplifier that shows a power capability of 300 W in a Long Term Evolution(LTE) band 7 is designed and fabricated using a CGHV40320D GaN HEMT from Wolfspeed. Based on the nonlinear model, the optimum source and load impedance are extracted from the source-pull and load-pull simulations at the fundamental and harmonic frequencies, and the harmonic impedance tuning circuits are implemented inside a ceramic package. The internally matched power amplifier, which is fabricated using a thin-film substrate with a high relative permittivity of 40 and an RF35TC PCB substrate, is measured at the pulsed condition with a pulse period of 1 ms and a duty cycle of 10%. The measured results show a maximum output power of 257~323 W, a drain efficiency of 64~71%, and a power gain of 11.5~14.0 dB at 2.62~2.69 GHz. The LTE-based measurement shows a drain efficiency of 42~49% and an ACLR of less than -30 dBc(excluding 2.62 GHz) at an average power of 79 W.
본 논문에서는 Wolfspeed사의 CGHV40320D GaN HEMT를 사용하여 LTE 밴드 7 대역에서 동작하는 S-대역 300 W급 내부 정합 전력증폭기를 설계하고 제작하였다. 비선형 모델을 바탕으로 기본주파수 및 고조파에서 소스풀 및 로드풀 시뮬레이션을 수행하여 최적 임피던스를 추출하였고, 세라믹 패키지 내부에 고조파 임피던스를 튜닝한 정합회로가 적용되었다. 비유전율 40의 고유전율 기판과 RF35TC PCB 기판을 사용하여 제작된 내부 정합 전력증폭기는 펄스 주기 1 ms, 듀티 10 %의 펄스 모드 조건에서 전력 성능이 측정되었으며, 2.62~2.69 GHz에서 257~323 W의 최대 출력 전력과 64~71 %의 드레인 효율, 11.5~14.0 dB의 전력 이득을 보였다. LTE 신호 기반의 ACLR 측정에서는 79 W의 평균 출력 전력에서 42~49 %의 드레인 효율을 보였고 2.62 GHz를 제외한 전체 주파수 대역에서 -30 dBc 이하의 성능을 보였다.