• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.

• Journal of The Korean Astronomical Society
• /
• v.52 no.1
• /
• pp.23-30
• /
• 2019

The KVN(Korean VLBI Network)-style simultaneous multi-frequency receiving mode is demonstrated to be promising for mm-VLBI observations. Recently, other Very long baseline interferometry (VLBI) facilities all over the globe start to implement compatible optics systems. Simultaneous dual/multi-frequency VLBI observations at mm wavelengths with international baselines are thus possible. In this paper, we present the results from the first successful simultaneous 22/43 GHz dual-frequency observation with KaVA(KVN and VERA array), including images and astrometric results. Our analysis shows that the newly implemented simultaneous receiving system has brought a significant extension of the coherence time of the 43 GHz visibility phases along the international baselines. The astrometric results obtained with KaVA are consistent with those obtained with the independent analysis of the KVN data. Our results thus confirm the good performance of the simultaneous receiving systems for the nonKVN stations. Future simultaneous observations with more global stations bring even higher sensitivity and micro-arcsecond level astrometric measurements of the targets.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1179-1192
• /
• 2018

In order to detect the Antarctic Polar Front (PF) among the main fronts in the Southern Ocean, this study is based on the combinations of satellite-based sea surface temperature (SST) and height (SSH) observations. For accurate PF detection, we classified the signals as front or non-front grids based on the Bayesian decision theory from daily SST and SSH datasets, and then spatio-temporal synthesis has been performed to remove primary noises and to supplement geographical connectivity of the front grids. In addition, sea ice and coastal masking were employed in order to remove the noise that still remains even after performing the processes and morphology operations. Finally, we selected only the southernmost grids, which can be considered as fronts and determined as the monthly PF by a linear smoothing spline optimization method. The mean positions of PF in this study are very similar to those of the PFs reported by the previous studies, and it is likely to be well represents PF formation along the bottom topography known as one of the major influences of the PF maintenance. The seasonal variation in the positions of PF is high in the Ross Sea sector (${\sim}180^{\circ}W$), and Australia sector ($120^{\circ}E-140^{\circ}E$), and these variations are quite similar to the previous studies. Therefore, it is expected that the detection approach for the PF position applied in this study and the final composite have a value that can be used in related research to be carried out on the long term time-scale.

• Korean Journal of Microbiology
• /
• v.54 no.4
• /
• pp.309-319
• /
• 2018

Previously, six Schizosaccharomyce pombe mutants that induce pheromone even in the presence of nitrogen source were isolated from a bank of temperature sensitive mutants. In this report, one of these mutants, pws6 was further characterized. The pheromone induction in pws6 mutant cells was specific to nutrient: the M-factor pheromone was induced without nitrogen starvation but not without glucose starvation. This result suggests that the pws6 mutant might have a specific defect in the pathway for nitrogen starvation. The pws6 mutant induces P-factor pheromone as well as M-factor without starvation of nitrogen in temperature sensitive mode, suggesting that the pheromone induction phenotype of pws6 mutation is not cell-type specific. From cloning of the $pws6^+$ gene by complementation of the temperature sensitive growth defect, three plasmids containing 8.1 kb, 3.3 kb, and 4.8 kb yeast DNA were recovered. These plasmids complement the growth defect of the pws6 mutant by 100%, 70%, and 10~20%, respectively. The abilities of these plasmids to complement pheromone induction phenotype of pws6 mutant cells were correlated well with the efficiencies of complementation of the growth defect. With comparison of their open reading frames to the complementation efficiencies, it is concluded that the open reading frame, SPBC19C7.06 is responsible for the complementation of temperature sensitive phenotype of the pws6 mutant. This open reading frame, named prs1, contains one long exon with no intron and encodes a putative prolyl tRNA synthetase. The putative Prs1 protein exhibits significant similarities to the prolyl tRNA synthetases of other species.

• Journal of The Korean Astronomical Society
• /
• v.54 no.3
• /
• pp.89-102
• /
• 2021

Even in an era where 8-meter class telescopes are common, small telescopes are considered very valuable research facilities since they are available for rapid follow-up or long term monitoring observations. To maximize the usefulness of small telescopes in Korea, we established the SomangNet, a network of 0.4-1.0 m class optical telescopes operated by Korean institutions, in 2020. Here, we give an overview of the project, describing the current participating telescopes, its scientific scope and operation mode, and the prospects for future activities. SomangNet currently includes 10 telescopes that are located in Australia, USA, and Chile as well as in Korea. The operation of many of these telescopes currently relies on operators, and we plan to upgrade them for remote or robotic operation. The latest SomangNet science projects include monitoring and follow-up observational studies of galaxies, supernovae, active galactic nuclei, symbiotic stars, solar system objects, neutrino/gravitational-wave sources, and exoplanets.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.127-133
• /
• 2020

It is important to measure the quantitative adhesive strength between an organic adhesive and a metal adherend. In measuring the adhesive strength between an organic adhesive and a metal adherend, the effect of the kind and thickness of the adherend on the adhesive strength was studied. Two kinds of metal adherends were selected, aluminum (Al1050) and stainless steel (STS304), and a dolly test and a lap shear test were used to measure the adhesive strength. When measuring the adhesive strength between the organic adhesive and the metal adherend by the tensile stress mode of dolly test, the change in the thickness of the metal adherend had little effect on the adhesive strength, however, the adhesive strength was different depending on the kind of the adherend. On the other hand, when measuring the adhesive strength between the organic adhesive and the metal adherend by the lap shear test, the change in the relative thickness of the metal adherend had an effect on the adhesive strength. The reason is that the bending phenomenon of the adherend occurring in the edge of bonding region during the lap shear test contributes to lowering the adhesive strength by generating additional tensile stress in the bonding region. From this work, it is concluded that the dolly test could be widely used when measuring the quantitative adhesive strength of organic adhesives and metal adherend because there is little change in adhesive strength even though the thickness of the adherend is changed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.86-94
• /
• 2022

Replacement of FRP rod as steel reinforcement has been attracted significantly to prevent the degradation of the concrete structure due to corrosion. So, the technology development to extend the structure's service life by improving FRP properties has been proceeded worldwide. Accordingly, it is necessary to develop Korea's CFRP rod and CFRP grid, including the manufacturing techniques to improve the properties of high-strength and high-stiffness. Moreover, the research should be conducted to evaluate the structural behavior of the beams using the CFRP rod or grid. This study investigates the flexural and shear behavior of reinforced concrete beam using demonstrated CFRP rod as reinforcement according to the reinforcement ratio and shear span to depth ratio. From the results, when the reinforcement ratio is out of a specific range, it is seemed that the effect on performance improvement of the beam using CFRP rod is cancelled or not significant. Meanwhile, when the CFRP rod was used as reinforcement, the possibility of shear failure occurred, even steel stirrups were installed in the beam with CFRP rod as tensile reinforcement according to the Korean Design Standard. Therefore, when the CFRP rod is used as tensile reinforcement in a beam, it should be prepared that a specific limitation of reinforcement ratio and an investigation against shear failure. Also, the ductility of the beam using the CFRP rod is determined by the deformation energy evaluation method. So, the ductility should be investigated by applying the deformation energy evaluation method that reflects the structural behavior of the beam.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.177-184
• /
• 2021

This study aims to develop the model of needs analysis for lifelong education program in order to verify social needs as well as personal needs. The overall process of this study is as follows. Firstly, a questionaire based on six mode classification of lifelong education program was invented in order to apply to program development. Secondly, a questionaire was designed to evaluate personal needs and social needs simultaneously. Thirdly, t-test, needs analysis of Borich model, and the Locus for Focus model were conducted with a view to analyze the difference between personal needs and social needs. As a result, there showed the categories of education which are high in both personal and social needs, whereas a category like certification program is higher in social needs rather than in personal needs. The results represent the necessities of promoting programs which are high in social needs even if there is no personal needs. Therefore the needs survey and the needs analysis need to be conducted to find out not only personal needs but also social needs.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.1 no.2
• /
• pp.41-59
• /
• 2022

Caodaism is a new religion from Vietnam which began in late 1925 and spread rapidly across the French colony of Indochina. With a broad syncretic aim, the new faith sought to revivify Vietnamese religious traditions whilst also incorporating religious, literary, and spiritist influences from France. Like Catholicism, Caodaism kept a strong focus on its monotheistic nature and today Caodaists are eager to label their religion a monotheism. It will be argued here, however, that the syncretic nature of this new faith complicates this claim to a significant degree. To make this argument, we will consider here the nature of God in Caodaism through two central texts from two important stages in the life of the religion. The first is the canonized Compilation of Divine Messages which collects a range of spirit messages from God and some other divine voices. These were received in the early years of the faith. The second is a collection of sermons from 1948/9 that takes Caodaist believers on a tour of heaven, and which is entitled The Divine Path to Eternal Life. It will be shown that in the first text, God speaks in the mode of a fully omnipotent and omniscient supreme being. In the second text, however, we are given a view of paradise that is much more akin to the court of a Jade Emperor within an East Asian milieu. In these realms, the personalities of other beings and redemptive mechanisms claim much of our attention, and seem to be a competing center of power to that of God. Furthermore, God's consort, the Divine Mother, takes on a range of sacred creative prerogatives that do something similar. Additionally, cadres of celestial administrators; buddhas, immortals, and saints help with the operation of a cosmos which spins on with guidance from its own laws. These laws form sacred mechanisms, such as cycles of reincarnation and judgement. These operate not in the purview of God, but as part of the very nature of the cosmos itself. In this context, the dualistic, polytheistic, and even automatic nature of Caodaism's cosmos will be considered in terms of the way in which they complicate this religion's monotheistic claims. To conclude, this article seeks to demonstrate the precise relevance of the term 'monotheism' for this religion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.185-192
• /
• 2023

In this study, fluctuating wind velocity for time history analysis is simulated by a single variate, single-dimensional random process using the KBC2022 spectrum about across-wind direction. This study analyzed and obtained the inelastic dynamic response for structures modeled as a single-degree-of-freedom system. It is assumed that the wind response is excellent in the primary mode, the change in vibration owing to plasticization is minor, along-wind vibration and across-wind vibration are independent, and the effect of torsional vibration is small. The numerical results, obtained by the Newmark-𝛽 method, shows the time-history responses and trends of maximum displacements. As a result of analyzing the inelastic dynamic response of the structure with the second stiffness ratio(𝛼) and yield displacement ratio (𝛽) as variables, it is identified that as the yield displacement ratio (𝛽) increases when the second stiffness ratio is constant, the maximum displacement ratio decreases, then reaches a minimum value, and then increases. When the stiffness ratio is greater than 0.5, there is a yield point ratio at which the maximum displacement ratio is less than 1, indicating that the maximum deformation is reduced compared to the elastically designed building even if the inelastic behavior is permitted in the inelastic wind design.