A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.
본 연구에서는 스마트 TMD를 효과적으로 제어할 수 있는 퍼지제어알고리즘을 개발하기 위하여 다목적 유전자알고리즘을 이용한 최적화기법을 제안하였다. 예제구조물로는 풍하중을 받는 76층 벤치마크건물을 선택하였다. 스마트 TMD를 구성하기 위하여 100kN 용량의 MR 감쇠기를 사용하였고, 스마트 TMD의 진동주기는 예제구조물의 1차모드 고유진동주기에 맞추어 조율되었다. MR 감쇠기의 감쇠력은 예제구조물의 풍응답을 최소화할 수 있도록 퍼지제어기를 통해서 조절된다. 퍼지제어기의 입력변수는 75층의 가속도 응답과 스마트 TMD의 변위응답으로 하였고, 출력변수는 MR 감쇠기로 전달되는 명령전압으로 하였다. 퍼지제어기의 최적화를 위하여 다목적 유전자알고리즘인 NSGA-II 기법이 사용되었고, 이때 75층의 가속도 응답과 스마트 TMD의 변위응답을 목적함수로 사용하였다. 최적화 결과, 구조물의 풍응답과 STMD의 변위응답을 동시에 적절히 제어할 수 있는 다수의 퍼지제어기를 얻을 수 있었다. 수치해석을 통해서 스마트 TMD의 성능이 수동 TMD에 비하여 월등히 뛰어남을 알 수 있었고 경우에 따라서는 샘플 능동 TMD보다 더 우수한 제어성능을 발휘하였다.
국내에서는 연료 가스 배관용 탄소강관으로 KS D 3631의 기준을 따르도록 되어있으며, 탄소강관이 지하에 매설되는 경우 부식을 방지하기 위해 강관에 합성수지로 피복을 한다. 피복은 부식 방지 조치를 하는 것으로 압축된 연료가스를 이송하는데 필요한 강도는 원관인 탄소강관이 그 역할을 수행한다. 따라서 탄소강관에 결함이 발생하였을 때, 그 결함에 따른 강도를 평가하는 것이 중요한데 국내에는 잔존강도를 평가하기 위한 방법이 부족하다. 결국 국외 기준인 DNV RP F101 또는 ASME B31G의 기준에 따라 잔존강도를 평가하는데, 그 결과가 국내 배관에 적용 타당성이 있는지 검증이 부족하며, 85% 이상의 결함에 대해서는 예측 할 수 없다. 따라서 본 연구에서는 KS D 3631의 배관을 이용하여 인위적 결함을 가공하여 잔존강도를 평가하기 위한 실험을 수행하였다. 그 결과 폭에 따라서 일정한 잔존강도의 차이를 보이며, 국내 연료 가스용 배관에는 DNV RP F101이 적합하다는 결론을 도출하였다. 본 연구의 결과는 결함 깊이가 큰 경우에 대한 결과와 타당한 국의 기준을 파악하기 위한 결과를 포함하고 있어, 배관의 잔존강도를 이용한 위험성 평가 등에 유용하게 활용될 것으로 기대한다.
최근 광 격자구조나(photonic crystal) 표면 플라즈몬파(surface plasmon) 혹은 실리콘을 이용한 나노(nano) 스케일의 광 회로 시스템에 대한 연구가 활발한데, 이는 이미 한계에 다다른 전자회로속도의 한계를 극복하고 지금보다도 훨씬 작은 회로를 구성할 수 있는 이점이 있기 때문이다. 현재까지 보고된 바 있는 광 결합 시스템들은 그 크기가 나노 스케일의 광 회로 시스템에 비해 커서 광 결합 시스템으로서의 의미가 퇴색되고 있는데 본 논문에서는 매우 짧은 초점 거리를 가지며 매우 얇은 구조를 가지는 프레넬 렌즈를 이용한 광 결합 시스템을 제안하여 광 결합 시스템을 나노 스케일 광 회로 시스템과 비교할 수 있을 정도로 소형화 하는 방법을 모색하였다. 본 논문에서는 금 슬릿을 채용한 프레넬 렌즈를 제안하여 설계하고 그 구조를 이용해 2차원 전산모사를 수행하였다. 그 결과, 일반 프레넬 렌즈의 광 결합 효율이 약 43%인데 반해, 금 슬릿을 채용한 프레넬 렌즈의 광 결합 효율은 가장 효율적인 구조로 설계하였을 경우에 최대 약 65%의 광 결합 효율을 보인다. 일반 프레넬 렌즈에 비해 50% 이상의 광 결합 효율의 향상을 달성하였다.
심미적 수복재료인 복합 레진과 글래스 아이오노머 시멘트는 중합방식에 따라 화학중합형, 광중합형, 그리고 이 두 가지 중합방식을 겸비한 이중중합형으로 분류할 수 있다. 화학중합형과 광중합형에 대해서는 지금까지 다수의 보고가 있었으나, 충전용 복합 레진의 경우 이들과 이중중합형을 비교한 예는 아직 찾기 힘든 실정이었으므로, 이러한 관점에서의 연구가 필요할 것으로 사료되었다. 이 연구에서는 이중중합 수복재가 단일중합방식에 비해 어떠한 특성을 보이는지를 탐구하고자 하였다. 사용된 재료는 광중합형 복합 레진인 Veridonfil-Photo와 이중중합형인 Bis-core, 이중중합형의 글래스 아이오노머 시멘트인 Fuji II LC와 화학중합형인 Ketac-fil을 사용하였다. 가로 30mm, 세로 30mm, 높이 1mm와 3mm인 두 종류의 아크릴릭 몰드 중앙에 직경 7mm의 hole을 형성하여 여기에 4종의 수복재를 충전하였다. 충전 직후부터 시작하여 24시간 경과시까지 일정 시간의 간격으로 표면, 1mm, 3mm 깊이에서의 경도를 미세경도계(Shimadzu Micro Hardness Tester HMV-2000, Shimadzu Co. Japan)로 측정하였다. 측정치를 통계처리하여 얻은 결과는 다음과 같다. 1. 4 종의 수복재 모두에서, 중합직후에 비해 24시간 경과후의 미세경도가 증가되었다. 2. 중합 직후부터 24시간 경과시점까지의 미세경도를 측정한 결과, Ketac-fil을 제외한 나머지 수복재에서는 각 깊이간 경도의 차이가 있었다. 3. 각 수복제의 최종중합에 도달하는 시간을 조사한 결과, 이중중합형이 3min의 깊이에서 광중합형이나 화학중합형에 비해 중합이 더 오래 지속된 것으로 나타났다. 이상의 결과에서 조사광이 충분히 도달하지 못하여 중합이 현저히 떨어지는 수복재의 심부에도 이중중합방식을 사용할 경우에는 지속적인 중합반응이 일어나 중합도가 증가하는 것으로 나타났다.
The purpose of this study was to describe how Korean nurses overcome the language barrier while working in the U.S. hospital settings. Twelve Korean nurses living in New York metropolitan area were asked open-ended, descriptive questions to collect the data. The interviews were done in Korean. All interviews were audiotaped under the permission of the participants and were transcribed verbatim. The data were analyzed using grounded theory analysis. The research process consisted of two phases. In the first phase 8 Korean nurses were interviewed and analyzed. In the second phase, further data were collected to verify categories and working hypotheses that were emerged from the first phase. The results of this study show that all Korean nurses experienced severe psychological stress such as confusion, anxiety, frustration, loss of self-confidence, embarrassment, guilt, depression, anger, and fear. Among the mode of communication such as listening, speaking, leading, and writing, they had the most difficulty in speaking. Speaking ability was especially important for them because of the emphasis of individualism and self-defense in the U.S. Among the verbal communication modes, non-face-to-face communications such as phone conversation and body language were the most difficu1t for them to overcome. It took at least 2 years for the participants to initially overcome the language barrier in U.S. hospitals. After 2-5 years they began to feel comfortable even in non-face-to-face communication. They could actively search for the better place to work after 5 years. They finally felt comfortable in English and in their job almost after 10 years. The factors that influenced the English improvement were ‘the years of clinical experience in Korea’, ‘the decade they came to the U.S.’ ‘coming to U.S. alone or with other Korean nurses’, ‘racial homogeneity or heterogeneity of the working unit’, and ‘the degree of social support’. The strategies Korean nurses used to overcome the language barrier included depending on the written communication, using ‘nunchi’, working and studying hard, and establishing good interpersonal relationships with co-workers. They also employed assertive behavior of the U.S., such as using more explicit verbal language and employing smiles and eye contact with others during the conversation. The results of the study may help Korean nurses and nursing students who try to work in U.S. hospital settings by understanding problems other Korean nurses faced, factors that influenced their English improvement, and strategies they used. They may also help U.S. nurses and administrators in developing and implementing efficient programs for newly employed Korean nurses by understanding major problems and feelings the Korean nurses experienced and strategies they used to overcome the language barriers.
Statement of problem : A scientific examination and understanding of overall aspects of the natural dentition is the first step involved in making a satisfactory selection in the shade of an aesthetic prosthesis. Proper natural shade selection of the prosthetic restoration that is in harmony with the remaining dentition is as important aesthetically, as harmony of form and function in the anterior dentition. Clinically, the most commonly applied method of shade selection has been visual, but because of the subjective nature inherent to this method, shade selection results are variable and can be influenced by such factors as the technician, the type of shade guide used, and the type and intensity of the lighting. Purpose : The purpose of this study was to develop a more objective and scientific approach to examining and understanding the shade of teeth, which has in turn lead to the development of a number of shade analysis devices that present a more objective method of shade analysis. Material and Method : In this study, the shades of healthy anterior teeth were examined and analyzed using the recently developed digital shade analysis of the $ShadeScan^{TM}$ System. The study examined 80 individuals in their twenties, 40 males and 40 females, presenting 6 healthy, unrestored maxillary anterior teeth. Tooth brushing and oral prophylaxis were performed prior to evaluation. The ShadeScan handpiece was used to acquire images of the 6 maxillary anterior teeth. These images were analyzed using the Vita/Classical mode of the $ShadeScan^{TM}$ Software, and shade maps of each tooth were acquired and divided into cervical, middle, and incisal thirds. The shade distribution of each third, left and right symmetry, and gender differences were investigated and analyzed. Results : The results of the study are as follows : 1. An overwhelming majority of the examined teeth were found to possess shades belong to Group A, with the greatest variations occurring at the middle and cervical thirds of the maxillary central and lateral incisors, in both male and female subjects. 2. Canines of both male and female subjects showed left and right symmetry with uniform shade distribution of A4 and C4, while the lateral and central incisors showed left-right symmetry of the incisal 1/3 with a uniform shade distribution of A2 and A3 shades 3. No significant differences in shade distribution were seen between genders in maxillary canines, whereas maxillary central and lateral incisors showed differences at the middle and cervical thirds between male and female subjects The results of this study show that with the exception of maxillary canines, maxillary anterior teeth display a diverse shade distribution as well as gender differences. Conclusion : Clinically, when making a shade selection using the existing shade guide, one must consider the fact that even a single tooth consists of a variety of shades. The results of this study show that when selecting a shade from a number of groups is difficult, shades from A group are the most consistent with the natural shade or maxillary anterior teeth.
강원도 점봉산(點鳳山) 북암령 일대(一帶)에 분포(分布)되어 있는 신갈나무림(林)에 $50m{\times}50m$, $20m{\times}400m$ 및 $20m{\times}200m$ 크기의 방형구(方形區)를 설치(設置)하여 신갈나무림(林)의 구조(構造)와 갱신(更新) 과정(過程)을 밝히고자 하였다. 이 지역(地域)의 삼림(森林)은 10m 이상(以上)의 상층(上層)에는 신갈나무가 우점하고 있으며, 특히 5-10m 사이의 중층(中層)과 하층(下層)에는 당단풍이 단연 우세하였다. 상층목(上層木)은 비교적 랜덤하게 분포(分布)하고 있으나, 일부의 중층목(中層木)과 하층목((下層木)들은 집중적으로 분포(分布)하는 경향이 보였다. 수령(樹齡)의 수평적(水平的)인 분포(分布)에 있어서는 수령폭(樹齡幅)이 10년(年) 내외(內外)의 동령적(同齡的)인 집단(集團)이 여러 곳에서 보여졌다. 상층목(上層木)과 중층(中層) 및 하층목(下層木)의 직경(直徑) 생장율(生長率)은 전체(全體) 생장(生長) 과정(過程)에 있어서는 중(中) 하층목(下層木)이 상층목(上層木)의 1/2 정도(程度) 불과하고 특히 초기(初期) 25년간(年間)의 생장율(生長率)은 상층목(上層木)의 2/3 이하(以下)에 불과하였다. 조사(調査) 지역(地域) 내(內)의 신갈나무림(林)은 주로 줄기절단과 가지절단에 의하여 Gap이 형성(形成)되고 있으며, 형성(形成)되어진 Gap은 실생(實生)의 정착(定着)에 의하여 갱신(更新)이 이루어지고 있는 것으로 나타났다. 이상(以上)의 결과(結果) 등으로부터 신갈나무림(林)의 갱신(更新) 양식(樣式)을 고찰(考察)하여 보면, 상층(上層)의 임관(林冠)이 트여져 Gap이 형성(形成)이 되면 그 밑에 신갈나무의 어린 개체(個體)들이 집중적(集中的)으로 발생(發生)하여 이들이 생장(生長)하게 됨에 따라 자기솎음과정에 의하여 전체로는 랜덤에 가까운 분포(分布)를 나타내게 되며, 이들 중의 몇 개체(個體)가 상층(上層)을 이루게 되는 것으로 추정(推定)된다.
광섬유 센서는 구조 건전성 감시 분야에 적용되는 유망한 센서 시스템이다. 특히 광섬유 브래그 격자(FBG) 센서는 본 분야에 있어 가장 각광받는 센서들 중에 하나이다. 이러한 FBG 센서는 브래그 파장의 이 동량을 알아내는 방법에 따라 다양한 시스템 구성이 가능하다. 또한 센서 시스템의 동특성은 이러한 시스템에 의해 결정된다. 본 논문에서는 FBG 센서의 브래그 파장 스팩트럼 최대 경사부에 단일 파장 레이저의 중심 파장을 맞춰 놓을 경우, 센서의 경사도가 센서 감도로 작용할 수 있다는 측정 원리를 이용하였다. 이러한 원리는 전체 측정 범위의 한계는 있지만 높은 민감도를 보장한다. 본 측정 원리의 적용 예로서, FBG 센서를 삽입한 복합재 평판을 오토클래이브를 이용해 제작하고 앞서 설명한 측정 원리를 적용하였다. 첫째로 삽입된 FBG 센서를 이용해 충격 망치로 가격된 복합재 평판의 고유 진동수를 성공적으로 측정하였다. 둘째로 고출력 스피커를 이용해 앞서 측정된 고유진동수 중 하나의 특정 주파수로 복합재 평판을 강제 가진 시켰다. 이때 발생하는 구조 진동을 FBG 센서로 측정하였고 동시에 ESPI 측정 시스템을 이용해 진동 모드 형상 역시 성공적으로 측정하여 복합재 구조물의 동특성을 파악하였다. 따라서, 이러한 두 실험을 통해 FBG 센서 시스템과 ESPI 측정 시스템이 복합재 구조물의 동특성 측정에 매우 유용한 기술임을 증명하였다.
The hypoglycemic and metabolic effects of Commelina communis L. extract were investigated in alloxan induced diabetic rats. The increased blood glucose level in the diabetic rats was significantly reduced and the loss of body weight was recovered with the treatment of the plant protein fractions($30{\sim}70%$ ammonium sulfate precipitates). Administration of the plant protein fractions elicited the significant increase of glucose-6-phosphate dehydrogenase (G-6-P DH) activity and liver weight which were decreased in the diabetic rat liver. G-6-P DH was partially purified from extract- or insulin-treated diabetics, diabetic control, and normal rat liver and studied for the biochemical properties. The $K_m$ value(9.002 mM) of diabetic rat liver enzyme was greatly higher than that (0.033 mM) of normal enzyme indicating the affinity of enzyme for the substrate was significantly reduced in the diabetic rat liver. This reduced affinity of enzyme for the substrate in the diabetic rat was recovered in the extract- or insulin-treated rat liver enzyme having 0.164 or 0.208 mM of their $K_m$ values, respectively. Although there was no significant difference in the optimum pH(6.0) and optimum temperature($37^{\circ}C$) of enzyme among the experimental groups, the dependence of their activities on pH appeared to be slightly resistant in the extract- or insulin-treated group compared to the diabetic group. In order to investigate the antigenicity of rat liver enzyme among experimental groups, enzyme-linked immunosorbent assay was carried out by using anti-G-6-P DH anti-serum. Absorbance(0.102) shown in the normal rat liver was reduced even below zero in the alloxan-diabetic rat liver, but increased again in the extract- or insulin-treated rat liver(0.096 or 0.118, respectively). The result of this study suggested that G-6-P DH may be used as a marker enzyme to diagnose and to indicate the progress of the diabetics, and the hypoglycemic effect of the extracts of Commelina communis L. was certainly associated with action or mode of G-6-P DH on the rat liver.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.