• 분석과학
• /
• 제27권4호
• /
• pp.187-195
• /
• 2014

잠재지문이 유류된 배경과 지문과의 대조비를 높이기 위한 증강작업 시에 잠재지문의 훼손을 최소화하는 것은 매우 중요하다. 본 실험은 반다공성 표면에 유류된 잠재지문을 시아노아크릴레이트 훈증 처리 후 p-dimethylaminobenzealdehyde (DMAB) 증강시약을 사용하여 그 효과를 확인하고, 증강효과에 미치는 환경적 요인을 분석한 것이다. 실험에 사용된 모든 지문은 시아노아크릴레이트 진공 훈증 후 실온에서 24 시간 건조해 사용하였다. 시아노아크릴레이트 훈증물의 DMAB 형광염색을 위해 표면적, 온도, 기압을 달리한 조건에서 12 시간 단위로 48 시간 동안 승화시켰다. 표면적 영향에 대한 실험에서 물질의 입자크기와 용기의 크기는 DMAB의 승화속도와 형광세기에 영향을 주었다. 또한 무용매접촉법을 적용한 DMAB 형광염색은 36 시간 승화 후 최대 형광세기를 보였고, 일정 표면적 이상에서는 형광세기에 미치는 영향이 저조하였다. 온도에 관한 실험에서 DMAB는 $20^{\circ}C$의 실온에서 가장 잘 승화하였고, 최대형광 세기를 얻을 수 있는 승화시간이 48 시간에서 36 시간으로 단축되었다. 또한 $30^{\circ}C$이상의 상온에서는 오히려 적정 형광세기를 나타내는 승화시간이 길어지고, 형광세기에 미치는 영향도 미약했다. 또한 압력에 관한 실험에서는 압력의 변화가 매우 크지 않는 이상 형광세기가 비진공상태에서의 형광세기보다 약했다.

• 한국세라믹학회지
• /
• 제42권7호
• /
• pp.497-502
• /
• 2005

This study investigated the effects of the substrate and powder content on the fabrication of SiO$_{2}$ photonic crystals by evaporation method. Photonic crystals were self-assembled on quartz, Corning 1737 glass, slide glass, and ITa glass to verify the effects of the wetting angle and surface morphology. The powder contents of the solution were varied from 0.2 to 2.0 wt$\%$. The number of photonic crystal layers increased according to the decrease of wetting angle and surface roughness. The resultant photonic crystals showed the best optical characteristics when the number of photonic crystal layers was within 40 and 50. In addition, the intensity peak of Fabry¡?Perot fringes increased when the wetting angle was large and the particle size was small. Photonic crystals coated on ITO glass showed the highest reflectance peak of 63$\%$ relative intensity.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.190-196
• /
• 2006

Transparent materials are widely used in the fields of optic parts and bio industry. We have experiment to find out the characteristics of the micromachining inside transparent materials using femtosecond laser pulses. With its non-linear effects by very high peak intensity, filament (plasma channel) was formed by the cause of the self-focusing and the self-defocusing. Physical damage could be found when the intensity is high enough to give rise to the thermal stress or evaporation. At the vicinity of the power which makes the visible damage or modification, the structural modification occurs with the slow scanning speed. According to the polarization direction to the scanning direction, the filament quality is quite different. There is a good quality when the polarization direction is parallel to the scanning direction. For fine filament, we could suggest the conditions of the high numerical aperture lens, the short shift of focusing point, the low scanning speed and the low power below 20 mW. As the examples of optics parts, we fabricated the fresnel zone plate with the $225{\mu}m$ diameter and Y-bend optical wave guide with the $5{\mu}m$ width.

• 한국광학회지
• /
• 제26권5호
• /
• pp.255-260
• /
• 2015

본 논문에서는 MAC(metal-assisted chemical) 에칭을 이용하여 Ge(Germanium) 표면에 나노구조를 형성하고, 그 위에 열팽창계수가 높은 PDMS를 적용하여 광음향효과를 이용한 초음파 발생 소자를 제작하였다. Ge 나노구조 위에 PDMS를 스핀 코팅하여 만든 초음파 발생 소자는 100 nm Cr(Chromium) 대비 약 3배의 초음파를 발생시켰다. 또한, Ge 나노구조를 PDMS 중앙에 위치시 킬 경우 쿼츠 기판을 통한 열손실이 줄어들어 100 nm Cr 대비 8.5배의 강한 초음파를 얻을 수 있었다.

• 유기물자원화
• /
• 제3권2호
• /
• pp.47-57
• /
• 1995

본 연구의 목적은 유기성폐기물 퇴비화시 교반강도가 퇴비화공정에 미치는 영향을 알아보기 위한 것이다. 주된 연구지표는 교반강도와 초기수분함량이었다. 본 연구를 위하여 기계식 교반장치를 갖춘 실험실규모의 퇴비화반응조가 이용되었다. 실험대상폐기물은 생분뇨슬러지와 감압증발처리공정을 거친 분뇨슬러지, 그리고 돈분을 이용하였다. 초기수분함량이 60%와 63% 인 경우 연속교반시 간헐교반보다 유기물분해율이 더 높게 나타났다. 또한 시료의 물리적 성상도 연속교반이 간헐교반보다 더 균등질의 양호한 상태를 나타내었다. 한편 초기 수분함량 68%인 경우는 혼합되기 보다는 시료 일부가 반죽상태를 형성하는 문제가 발생하였으며 유기물분해율도 연속교반의 경우가 간헐교반보다 더 낮게 나타났다.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.669-672
• /
• 2008

Well-aligned Zinc oxide (ZnO) nanowires were synthesized on silicon substrates by a carbothermal evaporation method using a mixture of ZnO and graphite powder with Au thin film was used as a catalyst. The XRD results showed that as-prepared product is the hexagonal wurzite ZnO nanostructure and SEM images demonstrated that ZnO nanowires had been grown along the [0001] direction with hexagonal cross section. As-grown ZnO nanowires were coated with glucose oxidase (GOx) for glucose sensing. Glucose converted into gluconic acid by reaction with GOx and two electrons are generated. They transfer into ZnO nanowires due to the electric force between electrons and the positively charged ZnO nanostructures in PBS. Photoluminescence (PL) spectroscopy was employed for investigating the movements of electrons, and the peak PL intensity increased with the glucose concentration and became saturated when the glucose concentration is above 10 mM. These results demonstrate that ZnO nanostructures have potential applications in biosensors.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-303
• /
• 2014

Flameless combustion, well known as MILD (Moderate Intensity Low oxygen Dilution) combustion or CDC(Colorless Distributed Combustion), is considered as one of the promising technology for achieving low NOx and CO emissions with improving thermal efficiency of combustion system. In this paper, the effects of exhaust gas dilution rate on formation of flameless combustion of liquid fuel were analyzed using three-dimensional numerical simulations for application of gas turbine combustor with high power density. Results show that the local high temperature region was decreased and flame temperature was spatially uniformly distributed due to higher dilution rate of burnt gas as similar pattern of gas phase flameless combustion. But the evaporation and mixing process of liquid fuel are found to be another important factors for formation of flameless combustion.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.965-968
• /
• 2004

H-montmorillonite was modified by interlayer surface silylation using 3-aminopropyltriethoxysilane and dodecylamine in ethanol without a pre-swelling step. Dodecylamine acts as a gallery expander and silylation catalyst. The evaporation of ethanol from the dispersion yields well-ordered silylated montmorillonites with large basal spacing between 1.50 and 4.20 nm. Solid-state $^29Si$ CP MAS NMR of the silylated samples showed $Q^2\;and\;Q^3$ signals as well as $T^2\;and\;T^3$ signals. The increase in the relative intensity of $Q^3\;for\;Q^2$ and the appearance of $T^2\;and\;T^3$ signals was attributed to the grafting of 3-aminopropyltriethoxysilane to the interlayer surface silanol groups.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1376-1379
• /
• 2007

The effects of the MgO fabrication process on the properties of AC-PDPs were examined. MgO films were deposited by e-beam evaporation with various substrate temperatures and oxygen flow rates. MgO films were analyzed by XRD, CL and ellipsometer. Panel properties such as luminance, efficiency, discharge voltage and discharge delay time were measured with test panels. MgO films with higher temperature, smaller oxygen flow rate showed shorter discharge delay time. Also they showed smaller XRD peak intensity. These results revealed that the discharge delay time was strongly influenced by temperature and oxygen flow rate of the MgO fabrication process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.297-300
• /
• 1997

In this study, The PVDF thin film was fabricated on the one method of dry-process the physical vapor deposition method, applied electric field, and evaporation control in $\beta$-PVDF thin film preparation. A study on the electric-field-phase change of PVDF thin film in physical vapor deposition using the polymer deposition apparatus which are manufactured for oneself. In the analysis of Fourier-Transform Infrared spectra, according to increasing of electric field intensity, the 510$cm^{-1}$ / peak and 1273$cm^{-1}$ / peak which are showed in $\beta$-PVDF increase, on the contrary the 530$cm^{-1}$ / peak and 977$cm^{-1}$ / peak which are showed in $\alpha$-PVDF decrease.