• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.3-7
• /
• 2010

Purpose: The usefulness of Positron Emission Tomography (PET) images in diagnosis, staging, recurrent and treatment response evaluation has already been known. However, tumors which are small size, located in lower lobe of lung or upper lobe of liver are shown misalignment, distortion and different Standard Uptake Value (SUV) by respiration in PET images. Therefore, if radiotherapy based on normal respiration, it may cause low treatment response or more side effects because targets which had to treat, out of treat range or over dose to normal tissue. The purpose of this study is to evaluate attenuation-correction with Average CT (ACT) for more accuracy SUV measurement and minimize artifact by respiration. Materials and Methods: 13 patients, who had tumors which are around the diaphragm, underwent ACT scan after Helical CT (HCT) scan with PET/CT (Discovery DSTE 8; GE Healthcare). We quantified the differences between attenuation corrected image with HCT and attenuation corrected image with ACT in artifact size and maximum SUV ($SUV_{max}$). Artifacts were evaluated by measurement of the curved photogenic area in the lower thorax of the PET images for all patients. $SUV_{max}$ was measured separately at the primary tumors. Analysis program was Advantage Workstation v4.3 (GE Healthcare). Patients were injected with 7.4 MBq (0.2 $mC_i$) per kg of $^{18}F$-FDG and scanned 1 hour after injection. The PET acquisition was 3 minute per bed. Results: Significantly lower artifact were observed in PET/ACT images than in PET/HCT images (below-thoracic artifacts caused by under corrected $1.5{\pm}3.5$ cm vs. $13.4{\pm}4.2$ cm). Significantly higher $SUV_{max}$ were noted in PET/ACT images than in PET/HCT images in the primary tumor. Compared with PET/HCT images, $SUV_{max}$ in PET/ACT images were higher by $5.3{\pm}3.9%$ (mean value) tumor. The highest difference was observed in Lower lobe of lung (7.7 to 8.7; 13%). Conclusion: Due to its significantly reduced artifacts in lower thoracic, attenuation corrected image with ACT images provided more reliable $SUV_{max}$ and may be helpful in monitoring treatment response. Moreover, ACT can separate upper lobe of liver and lower lobe of lung, it may be helpful in interpretation. ACT will be clinically useful, considering increased dose caused by ACT scan and adapt.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.211-220
• /
• 1994

The critical need of forest road for enchanting the additional values of various forest products, in addition, giving more recreational opportunity to citizen, has been recognized. In this study the present author aimed to ascertain the most effective construction working plan of forest road being tit to Korean geographic condition. To execute this research program, four locations in national forest of Kangweon-do district and other four locations in private forest in Chollabuk-do district both where forest roads have previously been constructed were selected to analyze the effectiveness basing upon the various factors separately or in combination. The results are summarized as follows ; 1. The investment efficiency in forest road construction showed to increase in the area where terrain factors and district social factors rate is high, and to decrease in the area where forest status factors and forest road structure factors rate is high. So in future the Forest Resource Development Model of forest road should take more importance particularly on those area having terrain factor ratio is low. The extractable value of constructed forest road based on forest status factors rate is expected to increase in case of high considerably. 2. To construct of forest road for increasing multiple use of forests, forest road should be construct with priority on area where obtained total score by evaluation factors is high. And these evaluation factors should take possible determine the position of forest road construction. 3. The following five types of forest road basing upon function performance are suggested with regard to the place where road is constructed. (1) Forest Utilization Model ; where forest status factors and forest road structure factors rate are over 60%. (2) Forest Resource Development Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are less than 60%. (3) Community Development Model ; where terrain factors, forest road structure factors and district social factors rate are over 60% but forest status factors rate are less than 60%. (4) Recreation and Health Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are over 60%. (5) Multiple Use Model ; where both forest status factors and district social factors rate are over 60%.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.3-9
• /
• 2011

Purpose: Generally dual energy X-ray absorptiometry has been used for the purpose of evaluation of osteoporosis and treatment. Recently the interest of obesity came to be high and body percent fat test is increasing. Existing measure of body fat have to scan the whole body can be evaluated, but only lumbar spine and hip measurements was assumed to be whole body fat as well as improving the software. It tries to check whether the part measured value not being whole body measurement has the validity or not compared with the value calculated with the method that it is different, it forgives through a correlation with a (BIA) and (BMI). Materials and Methods: In 2010, the body percent fat was measured among the examinee coming to the Asan Medical Center public health care center from March till August against 90 females more than 40 years old through (DXA) and BIA. BMI utilized the value which wrote an hight and weight measured through the body measuring instrument in the examinee information and is automatically calculated. In addition, it classified as the low weight ($13-18.5kg/m^2$), normal ($18.5-25kg/m^2$), and corpulence ($25-30kg/m^2$) based on BMI and so that it could check whether there was the difference according to the weight or not BMI and BIA and correlation between DXA were analyzed in each group. The statistical program for the analysis used SPSS 12.0. Results: The comparison of DXA at 3 which it divides into the low weight and normal and corpulence groups and BIA did not show the difference noted statistically in all groups and the between group comparison was exposed to do not have a meaning. The body percent fat measured by the correlation analysis result DXA at the state that it doesn't divide into the group showed the high correlation (r=0.908, p0.01) noted statistically compared with BMI and showed the high correlation noted statistically in a comparison with BIA (r=0.927, p0.01). Conclusion: It confirmed that the whole body percent fat presumed from the part bone density measurement showed the excel correlation compared with BIA and BMI and information is high. There is still no clear standard about the presumed whole body percent fat and it is difficult to evaluate the fat evaluation by the bone mineral density measurement. However, it is determined that the information offering which is more objective through the comparative study with the body percent fat which is very efficient and in that it can obtain till the information about a fat as well as diagnosis of the osteoporosis through the bone density checkup is measured by the afterward telegraph bone density checkup and is clinically useful is possible.

• Journal of Gifted/Talented Education
• /
• v.11 no.2
• /
• pp.127-150
• /
• 2001

The upcoming century is a knowledge based society which did not exist before which requires creative ability to solve problems. Therefore, it is necessary to Provide a creative program of problem solution in order to match this global trend The creativity of problem solution means the ability to solve a problem using previous ideas in an advanced way or develop new ideas. Creative education is especially important for infants. Because the young mind is where fresh ideas preside and can frame-work the early stage of life like a blank sheet of paper. The Infant-Early Child Creative Development Institute. as an adhesive institute at Yeungjin College, develops various programs that integrate methods which match current trend in this era and also start the Creative Promotion Test with 2,000 Families for the expansion of creative education from the baseline as an alternative method. The infants tested in the creative test will find ways of problem solution through animation beam projects for their given situation and also discuss the problems with their family members. Through these processes the infant and family members will complete the creative structures to solve the problems using limited materials given by the institute, and the final product will be evaluated as objective results. The final evaluation of the test will also be considered the teamwork of family cooperation and the attitudes of participants as well as the product of problem solution. The criterion of the evaluation is to be considered both a creative way of thinking and creative attitudes. Because the score counts were conducted manually it delayed the selection of awarded students who took the test. Also, we found that some parents have difficulty in accessing information to find the score through homepage from the computer. this Problem might be corrected in the future plan. Like Freud's saying, if human character and exploring attitudes during the early stage of a child, a person's creativity is composed their infant period as their basic foundation. Therefore, the family wh first environment the infant encounters will be treated as a prima when making basic structure. From this viewpoint, this creative test work as a festival of creativity fare with 2,000 families.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1450-1470
• /
• 2013

The purpose of this study was to develop elementary science programs that used multi-level instruction and to analyze verbal interaction patterns in science classes that applied these programs. For this study, the 27 children from the fifth grade at B elementary school, located in Gyeonggi-do, were selected and separated into heterogeneous groups of four students. Verbal interactions occuring in two groups during each class were recorded using video. Elementary science programs using multi-level instruction were developed to target a fifth grade second semester 'Lesson 1. Human Body'. This program provided a mission form for each group and evaluation form for each child. A mission form depending on the children's level has different colors and levels of difficulty for questions. The evaluation form is composed of questions suitable for a child's level in reaching the goal with key concepts. The verbal interaction was mostly categorized into the cognitive domain and the affective domain for analysis. The cognitive domain was subdivided into question, response, making solution, receiving opinion, and the affective domain was divided into behavioral participation and students' attitude. Results of study showed that the frequency of the cognitive domain was higher than the frequency of the affective domain. In the cognitive domain, the median-level was of highest frequency in the children. In the affective domain, high-level was of highest frequency in the children. In terms of both the cognitive and affective domains of children, low-level exhibited the lowest frequency. Verbal interaction frequency was no difference between high-level and median level in cognitive and affective aspects, so median-level children were actively participating in activities similarly with high-level children. There were more types of interactions question, response, making solution, students' attitude in the median-low level children's verbal interaction than high-median level children's verbal interaction.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.24-31
• /
• 2015

This research was conducted in order to examine the effect of tooth brushing room M elementary school in Changwon-city and to provide foundation data for effective project operation afterwards. The subjects were 347 students at the M elementary school where the tooth brushing room was being taught. The control group is 289 students at J elementary school where the tooth brushing room was not being taught. Research and analysis were carried out with structured survey and examination of decayed, missing, filled teeth (DMFT) index, decayed, missing, filled tooth surface (DMFS) index and O'leary index. The data was analysed by IBM SPSS Statistics ver. 19.0 program and the result is as follows: Depends on the tooth brushing room there was difference in statistical significance in filling teeth, sealant tooth surface, filling tooth surface, missing tooth surface, DMFS, O'leary index between the subject and control group. The less the frequency of brushing, the higher the DMFT index. Negative correlation was statistically significant. With incorrect brushing method, the less the frequency, the higher the DMFS index, Negative correlation was statistically significant. When the tooth brushing room was being implemented, O'leary index became low, negative correlation was statistically significant. As a result, in order to continue the effective operation of tooth brushing room, constant supervision and monitoring on students should be acutely needed by a principal, a school nurse and teachers in charge. Also together with a systemized cooperation between a health center and a nearby university's related majors departments, the research proposes to execute constant oral health education and to expand the implementation project of the tooth brushing room at nearby elementary schools.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.936-946
• /
• 2015

This study is aimed to analyze the reduction performance of building energy consumption according to planting base types of panel-type green walls which can be applied to existing buildings. The performance was compared to the general performance of green walls that have demonstrated effects of improving the thermal environment and reducing building energy consumption in urban areas. The number of planting base types was 4 in total, and simulations were conducted to analyze the thermal conductivity, thermal transmittance, and overall building energy consumption rate of each planting base type. The highest thermal conductivity by the planting base type was Case C (0.053W/mK), followed by Case B (0.1W/mK) and Case D (0.17W/mK). According to the results of energy simulation, the most significant reduction of cooling peak load per unit area was Case C (1.19%), followed by Case B (1.14%) and Case D (1.01%) when compared to Case A to which green wall was not applied; and the most significant reduction of heating peak load per unit area was estimated to be Case C (2.38%), followed by Case B (1.82%) and case D (1.50%) when compared to Case A. The amount of yearly cooling and heating energy use per unit area showed 3.04~3.22% of reduction rate. The amount of the 1st energy use showed 5,844 kWh/yr of decrease on average for other types when compared to Case A. The amount of yearly $CO_2$ emission showed 996kg of decrease on average when compared to Case A to which the green wall was not applied. According to the results of energy performance evaluation by planting location, the most efficient energy performance was eastward followed by westward, southward and northward. According to the results of energy performance evaluation by planting location by green wall ratio, it was found that as the ratio of green wall increased, the energy performance displayed better results, showing approx. double reduction rate in energy consumption at 100% of green wall ratio than the reduction rate at 20% to 80% of green wall ratio.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.403-409
• /
• 2010

The purpose of this study was to examine the teaching efficiency of clinical training for dental hygiene students in Gyeonggi Province. The subjects in this study were 371 dental hygiene juniors in seven different colleges in Gyeonggi Province, on whom a self-administered survey was conducted. The collected data were analyzed with a SPSS WIN 12.0 program, and the findings of the study were as follows: 1. The teaching efficiency of clinical training that the dental hygiene students undergone was on the average. As for evaluation of the factors of teaching efficiency, they gave the highest marks to the role model factor(3.40). 2. The size of the institutions where they received clinical training made no statistically significant differences to the teaching efficiency of their clinical training. The university hospitals ranked first in professional knowledge, one of the sub-directory of teaching efficiency, and the gap between them and the others was statistically significant(p=.005). 3. Concerning links between satisfaction level with the major and view of teaching efficiency, stronger satisfaction with the major led to better perception of teaching efficiency(p=.001). Among the subdirectory of teaching efficiency, that made statistically significant differences to view of interpersonal skills, performance as a supporter, fair evaluation, academic organization skills(p=.005), encouragement and support, teaching methods, professional academic knowledge(p=.001), communicative competency, performance as a role model and cooperation with the staff of dental clinics(p=.000). 4. There were no statistically significant gaps in teaching efficiency according to teaching styles. Among the sub-directory of teaching efficiency, statistically significant differences were found only in encouragement and support(p=.005). The above-mentioned findings suggest that the teaching efficacy of the clinical training was approximately on the average, and that a better satisfaction with the major led to a higher teaching efficacy. Therefore a wide variety of teaching methods and systematic training programs should be developed to boost the quality of clinical training to improve its teaching efficacy.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.165-173
• /
• 2013

To establishment of PT Program for Indoor air quality field that manufacture of confidential development PTMs (proficiency testing materials) and examined of proficiency testing evaluation included sampling process whether or not that is valid. Confirmation of homogeneity and stability of PTMs prepared. PTMs were confirmed to be homogeneous enough to be used as proficiency testing materials since withinbottle homogeneities of the RMs were lower than 0.3 times of targeted standard deviation of proficiency testing. The result of this study showed that the Robust RSD of proficiency testing for VOCs (volatile organic compounds) appeared 23~43% in concentration of 50~320 ${\mu}g/m^3$ for Method A(Distribution by adsorption in Tenax-tube of VOCs), but less 13~42% in concentration of 200~1200 ${\mu}g/m^3$, 16~31% in concentration of 100~450 ${\mu}g/m^3$ for Method B (distribution by VOCs of gas phase in 10L Tedalr bag), C (directly sampling of cylinder with high pressure) respectively. The result of this study showed that method C with sampling is most adequate to the proficiency testing for VOCs in indoor air.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2016

The purpose of this study was to provide resources for medical exposure reduction through evaluation of organ dose and image resolution for lumbar spine around according to the size of the collimator in DR system. The size of the collimator were varied from $8^{\prime\prime}{\times}17^{\prime\prime}$ to $14^{\prime\prime}{\times}17^{\prime\prime}$ by 1" in AP and lateral projection for the lumbar spine radiography with RANDO phantom. The organ dose measured for liver, stomach, pancreas, kidney and gonad by the glass dosimeter. The image resolution was analyzed using the Image J program. The organ dose of around lumbar spine were reduced as the size of the collimator is decreased in AP projection. There were no significant changes decreasing rate whenever the size of the collimator were reduced 1" in the gonad. The organ dose showed higher on liver and kidney near the surface in lateral projection. There were decreasing rate of less than 5% in liver and kidney, but decreasing rate was 24.34% in the gonad whenever the size of the collimator were reduced 1". Organ dose difference for internal and external of collimator measured $549.8{\mu}Gy$ in the liver and $264.6{\mu}Gy$ in the stomach. There were no significant changes organ dose difference that measured $1,135.1{\mu}Gy$ in the gonad. Image Quality made no difference because SNR and PSNR were over than 30 dB when the collimator size is less than $9^{\prime\prime}{\times}17^{\prime\prime}$ on AP projection and $10^{\prime\prime}{\times}17^{\prime\prime}$ on lateral projection. Therefore, we are considered that the recommendations criterion for control of collimator were suggested in order to reduce unnecessary X-ray exposure and to obtain good image quality because lumbar spine radiography contains a lot of peripheral organs rather than other area radiography.