• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.67-76
• /
• 2008

As the first comprehensive attempt at a national implementation, this study aims at assessing the external costs of major electricity generation technologies in Korea, particularly an evaluation of the impacts on human health resulting from exposures to atmospheric radiological emissions from nuclear power plants, and a monetary quantification of their damages. The methodology used for the assessment of the externalities of the selected fuel cycles has been developed by the International Atomic Energy Agency (IAEA), namely the SimPacts Model Package. The model is internationally recognized as a tool which can be applied to a wide range of fuels, different technologies and locations, for an externalities study. In this study, the relevant emissions are quantified first and then their impacts on human health are evaluated and compared. The study focused on all the nuclear power plants for the last 6 years ($2001{\sim}2006$) in Korea. With respect to nuclear power, the impact analysis only focuses on a power generation, however the front- and back-end nuclear fuel cycles are not included, namely uranium mining, conversion, enrichment, reprocessing, conditioning, etc., because these facilities are not present in Korea. The analysis results show that nuclear power in general, generates low external costs. The highest damage costs from the nuclear power plants among the 4 sites in Korea were estimated to be 3.9 mills/MWh, which is about 1/20th of the result for a similar case study conducted in the U.K., implemented through the ExternE project. This difference is largely due to the number of radionuclides included in the study and the amount of released radioactive emissions based on up-to-date information in Korea. In this study, the sensitivities of the major factors for nuclear power plants were also calculated. The analysis indicates that there was around a ${\pm}3%$ damage costs variation to a ${\pm}15%$ change of the reference population density and a ${\pm}1%$ damage cost variation to a $1{\sim}30$ meters change of the effective release height, respectively. These sensitive calculations show that there is only a minor difference when the reference costs are compared.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1021-1030
• /
• 2010

In the sensor network, many tiny nodes construct Ad-Hoc network using wireless interface. As this type of system consists of thousands of nodes, managing each sensor node in real world after deploying them is very difficult. In order to install the sensor network successfully, it is necessary to verify its software using a simulator beforehand. In fact Sensor network simulators require high fidelity and timing accuracy to be used as a design, implementation, and evaluation tool of wireless sensor networks. Cycle-accurate, instruction-level simulation is the known solution for those purposes. In this paper, we developed an instruction-level sensor network simulator for Telos sensor node as named TeloSlM. It consists of MSP430 and CC2420. Recently, Telos is the most popular mote because MSP430 can consume the minimum energy in recent motes and CC2420 can support Zigbee. So that TeloSlM can provide the easy way for the developers to verify software. It is cycle-accurate in instruction-level simulator that is indispensable for OS and the specific functions and can simulate scalable sensor network at the same time. In addition, TeloSlM provides the GUI Tool to show result easily.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.79-91
• /
• 2008

Recently, with highly Interest In Location-Based Service(LBS) utilizing location data of moving objects, the GALIS(Gracefully Aging Location Information System) which is a cluster-based distributed computing architecture was proposed as a more efficient location management system of moving objects. In the SLDS(Short-term location Data Subsystem) which Is a subsystem of the GALIS, since the SDP(Short-term Data Processor) Master transmits current location data and queries to every SDP Worker, the SDP Master reassembles and sends query results produced by SDP Workers to the client. However, the services are suspended during the SDP Master under failure and the response time to the client is increased if the load is concentrated on the SDP Master. Therefore, in this paper, the extended SLDS was designed and implemented to solve these problems. Though one SDP Master is under failure, the other can provide the services continually, and so the extended SLDS can guarantee the high reliability of the SLDS. The extended SLDS also can reduce the response time to the client by enabling two SDP Masters to perform the distributed query processing. Finally, we proved high reliability and high availability of the extended SLDS by implementing the current location data storage, query processing, and failure takeover scenarios. We also verified that the extended SLDS is more efficient than the original SLDS through the query processing performance evaluation.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.30-36
• /
• 2008

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we tested of the railway facilities using laser surveying system, then we propose data a generation of spatial images for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation. As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.159-171
• /
• 2021

In order for young people to be interested in tradition, a specialized experience program that can be frequently encountered is needed. We have developed an after-school traditional gift-wrapping design program in relation to the subject of home economics for the purpose of enabling students to become interested in tradition and deepen their traditional knowledge. The research process was comprised of analysis, development, and evaluation. We analyzed the home economics curriculum, authentic designs from blogs and department stores along with books published by gift-wrapping associations, and interviews with three gift wrapping specialists. Contemporary traditional packaging design is not limited to the reproduction of the traditional design but also creates designs that strongly express unique Korean identity using traditional symbol patterns, colors, traditional decorations, and small items along with modern materials. A 16-week after-school program was developed based on the analysis results. After the implementation of the after-school program in a middle school, survey results showed students who were indifferent toward tradition showed interest and acquired a positive image towards tradition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.101-107
• /
• 2020

Road surface measurement is an essential process for quantifying the degree and displacement of roughness in road surface management. For safer road surface management and quick maintenance, it is important to accurately measure the road surface while mounted on a vehicle. In this paper, we propose a sophisticated road surface measurement system that can be measured on a moving vehicle. The proposed road surface measurement system supports more accurate measurement of the road surface by using a high-performance line laser sensor. It is also possible to measure the transverse and longitudinal profile by matching the position information acquired from the RTK, and the velocity adaptive update algorithm allows a manager to monitor in a real-time manner. In order to evaluate the proposed system, the Gocator laser sensor, MRP module, and NVIDIA Xavier processor were mounted on a test mobile and tested on the road surface. Our evaluation results demonstrate that our system measures accurate profile base on the MSE. Our proposed system can be used not only for evaluating the condition of roads but also for evaluating the impact of adjacent excavation.

• Journal of The Korean Association For Science Education
• /
• v.43 no.3
• /
• pp.191-207
• /
• 2023

In this study, we comprehensively investigated the cases of science teachers who implemented NOS assessments in Science Inquiry Experiment. Two science teachers working at high schools located in Seoul who taught and assessed NOS in Science Inquiry Experiment according to the 2015 revised curriculum participated in the study. We collected lesson and assessment materials and observed NOS lessons and assessments. We also conducted interviews. Based on the collected data, we analyzed the processes of the teachers' NOS assessments. The analyses of the results revealed that the teachers constructed the assessments by themselves due to a lack of NOS assessment experience and related materials. They had difficulties in selecting an appropriate assessment method and constructing assessment questions and criteria. Both teachers found it difficult to assess an understanding of NOS because it concerns the subjective views of individual students. Therefore, they had difficulties in setting detailed assessment criteria, which also led to difficulties in the overall assessment process. There was a difference in the reflective level of the assessments between the two teachers. In the reflective activities of low levels, the assessments were not properly enacted because it was difficult to infer students' understanding. Orientation toward teaching NOS influenced the perceptions of NOS assessment and overall lessons, resulting in a difference in NOS assessments. Finally, the absolute evaluation of Science Inquiry Experiment also affected teachers' NOS assessments. Based on the above results, implications for effective NOS assessments in schools are discussed.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.285-295
• /
• 1990

The utilization of medical care services has been partly regionalized with the implementation of referral requirement by the government since July 1, 1989 when the health insurance coverage was extended to all the people. For the purpose of regionalization, the whole country has been primarily divided into tertiary care regions, and each of them again into secondary care regions. This study investigates the self-sufficiency for in-patient care services of secondary care regions focusing on why it varies among the regions. In doing so, analysis is performed to examine a model which embodies three sets of hypotheses as follows : 1) The regional self-sufficiency for medical care services would be subject to direct influences of regional characteristics, amount of available services and structural properties of regional medical care system ; 2) The regional characteristics would have indirect effects on the self-sufficiency which are mediated by medical care services ; and 3) The amount of available services would indirectly affect the self-sufficiency by influencing the structure of regional medical care system. The results of analysis were generally consistent with the model. The findings have some practical implications. The regional self-sufficiency for medical care services partly depends upon basic properties of each region which cannot be changed in a short period of time. Thus the self-sufficiency for medical care services can be improved mainly by health policy measures. In some of the regions the self-sufficiency for in-patient care services was much higher or lower than can be predicted from the bed-population ratio. Indication is that the allocation of health resources should be made considering a variety of factors bearing upon the supply of and demand for health care ; not on the basis of just a single criterion like the availability. The self-sufficiency of a certain region is related to not only its own characterstics but also the characteristics of neighboring regions. Therefore, attention should be also directed to the inter-regional relationships in health care when the needs for investment of health resources in a region are assessed. However, it should be noted that this study used the data collected before the referral requirement was imposed. A replication of this analysis using recent data would provide an evaluation of the impact on the self-sufficiency of the referral requirement as well as a confirmation of the findings of this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.619-623
• /
• 2018

This paper aimed to design a computer course teaching-learning strategy for (m-learning?) to be used in a Problem Based Learning (PBL) environment. The research findings were as follows. Firstly, learning contents were provided as educational tools for mobile device usage. The educational contents provided were designed for effective usage on mobile devices, such as smartphones, thereby making mobile devices suitable for use as learning tools. Secondly, learning contents for PBL were provided. PBL problems (for computer engineering courses) were made with the principles of teaching plans. The learning objectives were achieved through the problem-solving progress of the learners and their self-directed and cooperative learnings. Thirdly, learning resources were provided that were easily accessible through smartphones, laptops and PDAs. This study is about the PBL instructional design of creative engineering design subjects, which aims to foster talent. The PBL model developed in this study consists of Analysis, Design, Development, Implementation, and Evaluation. We made a plan for creative engineering design subjects based on PBL, and focused on the process of PBL. This research was able to establish the basis for PBL usage in Engineering Schools and help achieve its ultimate goal of endowing professional intellectuals with creative problem-solving abilities.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.4
• /
• pp.348-354
• /
• 2016

Data stored in hospital information systems has a great potential to improve adequacy assessment and quality management. Moreover, an establishment of a data warehouse has been known to improve quality management and to offer help to clinicians. This study constructed a data mart that can be used to analyze antibiotic usage as a part of systematic and effective data analysis of infection control information. Metadata was designed by using the XML DTD method after selecting components and evaluation measures for infection control. OLAP-a multidimensional analysis tool-for antibiotic usage analysis was developed by building a data mart through modeling. Experimental data were obtained from data on antibiotic usage at a university hospital in Cheonan area for one month in July of 1997. The major components of infection control metadata were antibiotic resistance information, antibiotic usage information, infection information, laboratory test information, patient information, and infection related costs. Among them, a data mart was constructed by designing a database to apply antibiotic usage information to a star schema. In addition, OLAP was demonstrated by calculating the statistics of antibiotic usage for one month. This study reports the development of a data mart on antibiotic usage for infection control through the implementation of XML and OLAP techniques. Building a conceptual, structured data mart would allow for a rapid delivery and diverse analysis of infection control information.