• Computers and Concrete
• /
• v.12 no.1
• /
• pp.53-64
• /
• 2013

The curing temperature is known to influence the rate of mechanical properties development of early age concrete. In realistic sites the temperature of concrete is not isothermal $20^{\circ}C$, so the paper measured adiabatic temperature increases of four different concretes to understand heat emission during hydration at early age. The temperature-matching curing schedule in accordance with adiabatic temperature increase is adopted to simulate the situation in real massive concrete. The specimens under temperature-matching curing are subjected to realistic temperature for first few days as well as adiabatic condition. The mechanical properties including compressive strength, splitting strength and modulus of elasticity of concretes cured under both temperature-matching curing and isothermal $20^{\circ}C$ curing are investigated. The results denote that comparing temperature-matching curing with isothermal $20^{\circ}C$ curing, the early age concretes mechanical properties are obviously improved, but the later mechanical properties of concretes with pure Portland and containing silica fume are decreased a little and still increased for concretes containing fly ash and slag. On this basement using an equivalent age approach evaluates mechanical properties of early age concrete in real structures, the model parameters are defined by the compressive strength test, and can predict the compressive strength, splitting strength and elasticity modulus through measuring or calculating by finite element method the concreted temperature at early age, and the method is valid, which is applied in a concrete wall for evaluation of crack risking.

• Journal of Hydrogen and New Energy
• /
• v.18 no.1
• /
• pp.60-66
• /
• 2007

In terms of the vehicle efficiency, a fuel cell hybrid system has advantages compared to a conventional internal combustion engine and a fuel cell alone-powered system. The efficiency of the fuel cell hybrid vehicle mainly depends on the maximum power of the fuel cell and therefore it is important to decide the design value of the fuel cell maximum power. In this paper, to estimate the performance of the fuel cell hybrid mini-bus in the design phase the simulator based on the models for the fuel cell stack, the electric battery, the fuel cell balance of plant, the controller, and the vehicle itself is proposed. Additionally, the hybrid mini-bus efficiencies with several different fuel cell powers are simulated for a city driving schedule and are compared on another. Consequently, the proposed simulation scheme is useful to determine the best design value of the fuel cell hybrid vehicles.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.384-386
• /
• 2003

Striking in change that present our country is much by electricity industry reform and the Korea Electric Power Corporation is deciding power distribution system reliability indices every year but power distribution system for reliability evaluation and establishment of investment program are consisting punily. If consider efficient inflection of resources and hereafter power distribution division that is limited for target achievement of schedule level service evaluation and reliability side in operation of the power distribution system, can expect efficient practical use of the power distribution property if gains in electrical side about these change and most suitable investment way consist because there is necessity of electric power plan establishment of area electric power distribution place of business unit. This paper consider proper reliability level and maximum effect through quantitative analysis to gain electrical gains of the power distribution system in reliability side depending on trend DB(Data Base) of data of electric power system composition appliance in this treatise and apply data administration and reliability rate analysis that serve to decide most suitable investment precedence to supply of electric power property to power distribution system present investment algorithm.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.171-176
• /
• 1999

Nondestructive inspection and accompanying life analysis based on fracture mechanics were the major conventional methods for evaluating remaining life of critical high temperature components in power plants. By using these conventional methods, it has been difficult to perform in-service inspection for life prediction. Also, quantitative damage evaluation due to unexpected abrupt changes in operating temperature was almost impossible. Thus, many efforts have been made for evaluating remaining life during operation of the plants and predicting real-time life usage values based on the shape of structures, operating history, and material properties. In this study, a core software for on-line life monitoring system which carries out real-time life evaluation of a critical component in power boiler(high temperature steam headers) is developed. The software is capable of evaluating creep and fatigue life usage from the real-time stress data calculated by using temperature/stress transfer Green functions derived for the specific headers and by counting transient cycles. The major benefits of the developed software lie in determining future operating schedule, inspection interval, and replacement plan by monitoring real-time life usage based on prior operating history.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.89.2-90
• /
• 2003

Potato late blight, caused by Phytophthora infestans, is one of the important diseases in potato cultivation areas. Though the incidence of late blight was depend on the inoculums and climatic condition In each fields, the foliar blight was reached to 100％ under the severe disease pressure condition in 2003. Outbreak of foliar blight was concentrated from May and July and evaluation of ten fungicides to control of late blight was made at Daekwallryoung area in potato fields. Based on the company recommendation, those fungicides were applied by a sprayer at the recommended rates on a weekly application schedule. Effect of ten fungicides on foliar blight was based on area under disease progress curve (AUDPC). Across all fungicides was reduced by 77％ in AUDPC and dimethomorph was reduced by 92％ in AUDPC during the same period, respectively. Those fungicide were inhibited the mycelial growth of isolate with different rate in chemical amended medium and several fungicides were completely limited the growth of isolate.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.2990-2998
• /
• 2024

In ITER, the evaluation of the activated water radiation source and its impact on the radiological levels is necessary to demonstrate compliance with the safety requirements. The use of simplified or conservative approaches often results in the application of expensive constraints on the installation that impact its economics, operations, and construction schedule. In this work, we propose a novel methodology to calculate the activated water source term with a higher degree of realism. The methodology is based on the coupling of a system-level code with a Computational Fluid Dynamics (CFD) code in an explicit, one-way approach. We apply this methodology to the evaluation of the16N radioisotope within the ITER Vacuum Vessel Primary Heat Transfer System (VV-PHTS) cooling circuit in a steady-state and transient scenarios. We chose this system since previous analyses of the VV-PHTS were done with simple, ad-hoc calculations that yielded results that differed by up to a factor of five, underscoring a higher level of uncertainty. As a result, we generate a computational model of the source term that can be used to evaluate the radiological condition surrounding the cooling systems during the operations.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.47-54
• /
• 2020

Developmental disorders are impairments of brain and/or central nervous system and refer to a disorder of brain function that affects languages, communication skills, perception, sociality and so on. In diagnosis of developmental disorders, behavioral response such as expressing emotions in proper situation is one of observable indicators that tells whether or not individual has the disorders. However, diagnosis by observation can allow subjective evaluation that leads erroneous conclusion. This research presents the technological environment and data acquisition system for AI based screening of autism disorder. The environment was built considering activities for two screening protocols, namely Autism Diagnostic Observation Schedule (ADOS) and Behavior Development Screening for Toddler (BeDevel). The activities between therapist and baby during the screening are fully recorded. The proposed software in this research was designed to support recording, monitoring and data tagging for learning AI algorithms.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.295-306
• /
• 2002

Successful project planning relies on a good estimation of the effort required to complete a project, together with the schedule options that may be available. Despite the extensive research done developing new and better models, existing software effort estimation models are present only the total effort and instantaneous effort function for the software life-cycle. Also, Putnam presents constant effort rate in each phase. However, the size of total effort are variable according to the software projects under the influence of its size, complexity and operational environment. As a result, the allocated effort in each phase also differ from project to project. This paper suggests the criteria for effort allocation in planning, specifying, building, testing and implementing phase followed by the project total effort. These criteria are derived from 183 different projects. This result can be considered as a practical guideline in management of project schedule and effort allocation.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.103-110
• /
• 2009

We are witnessing rapid increase of the number of wireless devices available today such as cell phones, PDAs, Wibro enabled devices. Because of the inherent limitation of the bandwidth available for wireless channels, broadcast systems have attracted the attention of the research community. The main problem in this area is to develop an efficient broadcast program. In this paper, we propose a dynamic broadcast method that overcomes the limitations of static broadcast programs. It optimizes the scheduling based on the probabilistic model of user requests. We show that dynamic broadcast system can indeed improve the quality of service using user requests. This paper extends our previous work in [1] to include more thorough explanation of the proposed methodology and diverse performance evaluation models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.801-809
• /
• 2023

Road construction projects have a long duration so cost overruns and schedule delays are occurred. However, performance assessment system that can manage and prepare for this in advance is insufficient. In addition, road construction are affected by many factors during under construction. Therefore it is necessary to conduct performance assessment considering the characteristics of roads and prepare for similar projects in the future. The purpose of this study is to provide a framework to evaluate construction phase performance and present a performance management plan using road construction information. Also, This study conducted time adjustment between the start and the finish of the project and developed performance metrics based on absolute and relative indicator. This study analyzed the cost, schedule, and changes of the road project construction process, showing the possibility of advancement of performance assessment and how to use it when planning new road construction projects.